Best 30W Fiber Laser Engravers: Top 9 Picks (November 2026)
The best 30W fiber laser engravers include the xTool F1 Ultra 20W Fiber & Diode for mixed materials, the xTool S1 40W Laser Cutter and Laser for large diode projects, and the G·WEIKE GWEIKE G2 Max 50W Fiber Laser for higher-power fiber work.
On this page (6 sections)
- How we compared 30W fiber laser engravers
- Compare the laser type before comparing wattage
- The best 30W fiber laser engravers and alternatives
- What should you check before buying a 30W fiber laser?
- Is a 30W fiber engraver better than a 20W or 50W model?
- Verdict: which 30W fiber laser engraver should you choose?
The best fiber laser engraver 30W should be a genuine fiber machine sized for your metal work, but these available picks span 20W and 50W fiber systems plus diode models. For dedicated metal marking, start with the G·WEIKE G2 Plus; for mixed materials, consider the xTool F1 Ultra.
The keyword often points to a narrow comparison, but wattage alone can mislead. For a broader look at equipment for metal marking, see laser marking machines.
A 30W diode machine and a 30W fiber engraver use different laser types and suit different materials, so first decide whether direct metal marking is the goal.
Our picks at a glance
-
1
-
2
-
3
Best for higher-power fiber workG·WEIKE GWEIKE G2 Max 50W Fiber Laser
9.2/10 our score
See it on Amazon
- 4
Check itACMER S1 Laser Engraver Machine
Best for compact diode projects - 5
Check itLONGER Ray5 Laser Engraver and Cutter Machine
Best for broad diode work area - 6
Check itLonger Laser B1 30W Laser Engraver Cutter
Best for 30W diode cutting - 7
Check itCREALITY FALCON 10w Laser Engraver with Air
Best for rotary craft projects - 8
Check itCreality Falcon A1 10W Laser Engraver
Best for enclosed diode setup - 9
Check itG·WEIKE GWEIKE G2 Plus 20W Fiber Laser
Best for compact metal marking
How we compared 30W fiber laser engravers
A good 30W fiber laser engraver comparison should put laser type and work area ahead of the headline wattage. We weighed the stated laser source, working area, focus method, software support and the mix of materials each machine targets.
Our score weighs specs, features and buyer feedback against what you're shopping for.
The exact 30W fiber option requested is not represented among these nine products. The closest fiber choices are the 20W G2 Plus and 50W G2 Max, while the Longer B1 is a 30W diode engraver.
For a wider metal-focused shortlist, see our Best Fiber Laser For Metal guide.
Compare the laser type before comparing wattage
A 30W label does not by itself tell you whether a machine is suitable for metal marking. Fiber machines in this group use 20W or 50W fiber sources, while several larger work-area models use diode lasers.
| Product | Best for | Laser type | Working area | Positioning | Our score |
|---|---|---|---|---|---|
| xTool F1 Ultra 20W Fiber & Diode | mixed materials | 20W fiber and 20W diode | 220 x 220 mm | 16MP camera | 9.6 |
| xTool S1 40W Laser Cutter and Laser | large diode projects | 40W laser | 9.5 | ||
| G·WEIKE GWEIKE G2 Max 50W Fiber Laser | higher-power fiber work | 50W 1064nm fiber | 150 x 150 mm | Dual red light | 9.2 |
| ACMER S1 Laser Engraver Machine | compact diode projects | Diode | 130 x 130 mm | 9.0 | |
| LONGER Ray5 Laser Engraver and Cutter Machine | broad diode work area | Diode | 400 x 365 mm | 8.9 | |
| Longer Laser B1 30W Laser Engraver Cutter | 30W diode cutting | Diode | 450 x 440 mm | 8.8 | |
| CREALITY FALCON 10w Laser Engraver with Air | rotary craft projects | Diode | 8.8 | ||
| Creality Falcon A1 10W Laser Engraver | enclosed diode setup | Diode | 15 x 12 in | 8.8 | |
| G·WEIKE GWEIKE G2 Plus 20W Fiber Laser | compact metal marking | 20W 1064nm fiber | 150 x 150 mm | 8.7 |
The best 30W fiber laser engravers and alternatives
The xTool F1 Ultra is the most flexible choice here because it combines fiber and diode sources, while the G2 Max is the higher-power dedicated fiber option. The other picks make sense when your work area, rotary setup or diode cutting needs matter more than a 30W fiber match.
xTool F1 Ultra 20W Fiber & Diode: Best for mixed materials
- 20W fiber and 20W diode lasers
- 220 x 220 mm working area
- 16MP camera
- Conveyor available separately
Two laser types cover metal and common nonmetal projects in one machine. The 220 x 220 mm area is larger than the listed areas of the G·WEIKE fiber picks.
Pros
- Fiber and diode lasers in one machine
- Camera-assisted batch workflow
- Conveyor can extend the work area
Cons
- Not a 30W fiber laser
- Auto Conveyor is separate
The xTool F1 Ultra is the strongest fit for a workshop that moves between metal and nonmetal projects. Its 20W fiber and 20W diode lasers handle different material groups, so you can engrave metals with the fiber source and use the diode for materials such as wood, acrylic, leather, glass and fabric.
A 220 x 220 mm working area gives it more room than the 150 x 150 mm areas of the G·WEIKE models. The 16MP camera supports positioning, and the Auto Conveyor, available separately, can extend the area to 220 x 500 mm for batch work.
For cylindrical metal pieces, see fiber engravers with rotary attachments.
Compare more laser cutters with camera positioning if camera-guided placement is a priority.
xTool says the machine can engrave at speeds up to 10,000 mm/s. It also describes fiber cutting for thin metal sheets and diode cutting for wood and black acrylic, but the F1 Ultra remains a 20W fiber model, not a 30W fiber engraver.
Choose it when you need one desktop machine for metal plus common craft materials. If your work is mainly metal, compare it with the simpler dedicated fiber choices below and read how to use a fiber laser engraver before setting up jobs.
xTool S1 40W Laser Cutter and Laser: Best for large diode projects
- 40W laser
- 23.93 x 15.16 in bed
- Up to 600 mm/s engraving speed
- Auto-focus
The broad bed and 40W power suit larger cutting and engraving projects. It is not a fiber machine, so it is a different choice from a metal-focused fiber engraver.
Pros
- Large bed for sheet projects
- Auto-focus
- Enclosed Class 1 design
Cons
- Not a fiber laser
- Larger footprint than the compact fiber picks
The xTool S1 is a diode cutter and engraver for larger craft projects, not a fiber laser for direct metal engraving. Its 23.93 x 15.16 in bed gives you room for broad layouts such as signs or batches of smaller items.
The machine is rated at 40W and supports engraving speeds up to 600 mm/s. xTool describes auto-focus, its Creative Space software and an enclosed design with flame sensors, an emergency stop and a lid-open stop feature.
This makes sense when your main work involves wood, acrylic or other craft materials and your projects need more bed space than a compact fiber marker offers. It does not replace a 30W fiber machine just because its wattage is higher.
Choose it for large diode projects, and skip it if metal marking is the main job. For another diode option with a different power and bed size, compare the Best 30W Laser Engraver guide.
G·WEIKE GWEIKE G2 Max 50W Fiber Laser: Best for higher-power fiber work
- 50W 1064nm fiber laser
- 150 x 150 mm area
- Electric lift column
- GLaser and LightBurn support
This higher-power fiber option adds an electric lift and a 150 x 150 mm area for metal marking and deeper engraving tasks. Its power is well above the 30W class.
Pros
- 50W fiber source
- Electric focus adjustment
- Wi-Fi and USB connections
Cons
- Class 4 safety level
- Not a 30W model
The G·WEIKE G2 Max is the higher-power dedicated fiber option in this group. Its 50W 1064nm fiber source targets deep engraving and metal marking, while the 150 x 150 mm area keeps the machine focused on smaller parts and projects.
An electric lift column handles focus adjustment, and dual red light positioning supports previewing the work area. G·WEIKE lists GLaser and LightBurn compatibility with Wi-Fi and USB connections.
The G2 Max is not a 30W model, so it may be more power than you need for lighter marking tasks. For a 60W MOPA option, read the xTool F2 Ultra 60W MOPA review.
Its Class 4 safety level also means you need a suitable controlled workspace and must follow the machine instructions and local safety requirements.
Choose it when the 30W target is flexible and a higher-power fiber machine better suits the work. If you're comparing power classes, our 60W fiber laser engraver guide covers what to consider before stepping up further.
ACMER S1 Laser Engraver Machine: Best for compact diode projects
- 2500mW diode laser power
- 130 x 130 mm work area
- Supports LightBurn and LaserGRBL
- 99% preassembled
A small, lightweight frame suits compact craft work and a limited workbench. It is a diode machine rather than a fiber laser for metal marking.
Pros
- Compact 2 kg design
- Supports common engraving software
- Small work area for small projects
Cons
- Not a fiber laser
- Not a 30W machine
The ACMER S1 is a compact diode engraver for small craft projects, not a fiber laser. For lower-cost alternatives, see laser engravers under 200 dollars.
Its 130 x 130 mm working area and 2 kg weight fit a small bench or a machine that needs to be moved and stored.
ACMER gives it 2500mW diode laser power, a stated machine output of 24W and support for LightBurn and LaserGRBL. It arrives 99% preassembled, with a laser head installation step described as taking about a minute.
Those details make it a beginner-friendly small-format option, but its diode source does not make it an alternative for direct metal engraving with a fiber laser. Treat its material range as a craft workflow and check the engraving method for each material.
Choose the ACMER when portability and a small footprint matter more than a metal-focused fiber source. For more compact options, see mini laser engravers.
It is not a 30W fiber engraver.
LONGER Ray5 Laser Engraver and Cutter Machine: Best for broad diode work area
- 20W diode laser module
- 400 x 365 mm work area
- Touchscreen control
- USB, TF card, Wi-Fi and app connectivity
The large work area makes this a diode option for broad craft layouts. It is not a fiber engraver, so compare it only if your projects extend beyond metal marking.
Pros
- Large work area
- Several connection options
- Touchscreen for control
Cons
- Not a fiber laser
- Not a 30W machine
The LONGER Ray5 is a diode machine for larger craft layouts, with a 400 x 365 mm work area. That area is much broader than the compact fiber machines here, which can help when you need to place larger pieces or arrange many small designs.
Its 20W laser module is paired with a touchscreen, USB, TF card, Wi-Fi and app connectivity. LONGER also describes a protective enclosure, emergency stop and motion and overheating protections.
The Ray5 is not a fiber laser, so its metal-related engraving claims should not be treated as a substitute for a fiber marking workflow. Its larger working area is the main reason to consider it alongside this comparison.
Choose it for broad diode work, especially projects that do not require a 30W fiber source. For metal-focused work, stay with the G·WEIKE fiber models or another verified fiber machine.
Longer Laser B1 30W Laser Engraver Cutter: Best for 30W diode cutting
- 30W laser engraver cutter
- 450 x 440 mm work area
- Auto air-assist pump
- Up to 600 mm/s working speed
This is the closest 30W match by name, with a large area and air assist. It uses a diode laser, so it is not a 30W fiber engraver for direct metal marking.
Pros
- Large work area
- Air assist included
- Safety features include an emergency stop
Cons
- Not a fiber laser
- Large frame needs bench space
The Longer Laser B1 is the closest match by the 30W name, but it is a diode engraver cutter rather than a 30W fiber machine. Its 450 x 440 mm working area and included air-assist pump suit larger craft cutting projects.
The B1 is described with output power up to 36W and working speeds up to 600 mm/s. Longer also lists cutting claims for wood and acrylic, plus color engraving on mirrored stainless steel; those are not the same as a general-purpose fiber metal engraving workflow.
Eight stated safety features include movement, flame, offline and emergency-stop protections. As with any open-frame laser, plan the workspace, enclosure and eye protection around the machine's class and instructions.
Choose the B1 if a roomy diode cutter is what you need and the 30W label caught your attention. Skip it if your search specifically means a 30W fiber source for marking metal.
CREALITY FALCON 10w Laser Engraver with Air: Best for rotary craft projects
- 10W diode laser
- Rotary roller included
- Adjustable air assist
- Supports LightBurn and LaserGRBL
The included rotary kit supports work on cylindrical objects such as tumblers. This is a 10W diode machine, not a fiber engraver for a 30W metal workflow.
Pros
- Rotary kit included
- Adjustable air assist
- USB and TF card workflows
Cons
- Not a fiber laser
- Lower output than the 30W class
The CREALITY FALCON 10W is a diode machine whose included rotary kit is its clearest difference. The kit supports cylindrical objects and several shapes, while the adjustable air assist helps clear smoke and dust during engraving or cutting.
Its 10W laser output is well below the 30W target. Creality lists compatibility with LightBurn and LaserGRBL, along with a TF card option for offline work.
This pick belongs in the comparison only if your project mix includes tumblers or other rotary work and you are considering diode machines too. It is not a fiber engraver for direct metal marking.
Choose it for a rotary craft setup, not as a lower-cost stand-in for a 30W fiber machine.
Creality Falcon A1 10W Laser Engraver: Best for enclosed diode setup
- 10W diode laser
- Fully enclosed Class 1 design
- Built-in camera
- 15 x 12 in engraving area
The enclosure, camera and preassembled setup suit a buyer who wants a contained diode workflow. It is not a 30W fiber machine for metal engraving.
Pros
- Fully enclosed Class 1 design
- Built-in camera
- Preassembled setup
Cons
- Not a fiber laser
- 10W output
The Creality Falcon A1 is a fully enclosed 10W diode engraver for craft work. Its 15 x 12 in area, built-in camera and preassembled setup make it a contained choice for placing designs on sheet materials.
Creality describes a Class 1 safety design, lid-opening pause and emergency stop. The machine supports Falcon Design Space, LightBurn and LaserGRBL, and its stated diode cutting materials include wood and black acrylic.
The Falcon A1 is not a 30W fiber machine. Creality also advises against engraving highly reflective materials, including mirror-finished metals and mirrored acrylic.
Choose it if an enclosed diode workflow is your priority. For direct metal engraving, compare fiber machines and verify that their source, safety setup and working area fit your job.
G·WEIKE GWEIKE G2 Plus 20W Fiber Laser: Best for compact metal marking
- 20W 1064nm fiber laser
- 150 x 150 mm area
- Electric lift column
- LightBurn support
The 20W fiber source and electric lift make this a compact metal-marking option. It is below the 30W target, but it keeps the machine type aligned with metal work.
Pros
- Fiber source for metal marking
- Electric focus adjustment
- Wi-Fi and USB connections
Cons
- Not a 30W model
- Class 4 safety level
The G·WEIKE G2 Plus is the closest fit here for a buyer who wants a compact, dedicated fiber machine for metal marking. Its 20W 1064nm fiber laser is below 30W, but its 150 x 150 mm working area, electric lift and red light preview align with the intended metal workflow.
G·WEIKE lists LightBurn compatibility, Wi-Fi and USB connections, plus resolution choices up to 8K. It also describes color marking on stainless steel and titanium, and deep engraving on several metals.
The key tradeoff is power: the G2 Plus is not a 30W model. If 30W is a firm requirement, confirm the exact laser source and rated output with the manufacturer before buying, rather than relying on a product family name or a diode machine's output figure.
Choose the G2 Plus when compact metal marking matters more than matching the exact 30W number. Our guide to How Does a Laser Engraver Work? explains why laser type changes what a machine can do.
What should you check before buying a 30W fiber laser?
Before choosing a 30W fiber engraver, confirm the source type, work area and safety requirements. A larger wattage number or broad material list does not tell you whether the machine matches your specific metal, mark depth or production pace.
Check these points against your own jobs:
- Fiber source and rated output: Confirm that the machine is a fiber laser and that the stated wattage refers to the fiber source. Do not confuse diode output or machine output with fiber power.
- Work area: Compare the marking field with your largest part, including room for a rotary attachment if you need one.
- Focus and positioning: An electric lift, camera or red light preview can simplify setup, but consider which method suits your parts.
- Software and connections: Confirm support for your preferred software and how files move between the computer and machine.
- Safety: Check the machine's laser class, enclosure and operating instructions. Class 4 fiber machines require a controlled setup and appropriate safeguards.
- Job type: Light surface marks, color marking and deeper engraving can call for different settings and machine capabilities.
For a MOPA source comparison, start with What Is a MOPA Laser?. MOPA is a separate feature to evaluate against your material and finish goals, not another name for a 30W rating.
Is a 30W fiber engraver better than a 20W or 50W model?
A 30W fiber engraver sits between the 20W and 50W options by stated power, but the best choice depends on the job. The 20W G2 Plus is the closer compact metal-marking fit in this group, while the G2 Max offers a 50W fiber source for buyers who want more power.
Look at the material, required depth, mark size and job volume together. If you don't need deeper work or higher throughput, extra power may not be useful; if you do, ask the manufacturer for guidance on the exact application.
The xTool F1 Ultra is a different case because it combines a 20W fiber source with a 20W diode. That split can suit mixed-material work, but its fiber laser is still not 30W.
Verdict: which 30W fiber laser engraver should you choose?
Choose the G·WEIKE G2 Plus if compact metal marking is the priority and 20W is acceptable. Choose the G2 Max if you want a 50W fiber source, or the xTool F1 Ultra if you need both fiber and diode capabilities.
If the requirement is exactly a 30W fiber engraver, confirm the laser source and output with the manufacturer before you buy. The Longer B1 has 30W in its name but is a diode machine, so it does not meet that fiber requirement.
Our top 3 picks at a glance
-
1
-
2
-
3
Best for higher-power fiber workG·WEIKE GWEIKE G2 Max 50W Fiber Laser
9.2/10 our score
See it on Amazon
Frequently asked questions
Is a 30W fiber laser good for metal engraving?
A 30W fiber laser is a useful class to compare for detailed metal marking and engraving. The right fit depends on the metal, mark depth, work area and production pace you need.
Check that the machine is actually fiber, since diode engravers with similar wattage labels do not serve the same metal workflow.
Is the Longer Laser B1 a 30W fiber laser?
No. The Longer Laser B1 30W is a diode laser engraver and cutter with a 450 x 440 mm work area and an air-assist pump.
It may suit wood and craft cutting projects, but it is not a direct substitute for a 30W fiber engraver used for metal marking.
What is the difference between a 20W and 50W fiber engraver?
The 50W G·WEIKE G2 Max has more stated laser power than the 20W G2 Plus. Both have a 150 x 150 mm area and electric lift columns.
Compare the specific material, engraving depth and production needs before choosing by power alone.
Should I choose a MOPA fiber laser?
A MOPA source is worth comparing when pulse control and the range of metal marking effects matter to your work. Confirm that the machine supports the materials and finish you need.
Our guide to what a MOPA laser is explains the distinction.
About this guide: Our look at 30W fiber laser engravers draws on maker specs, materials and what owners report. See how we research.



