xTool F2 Ultra 60W MOPA Review: Worth It? (November 2026)
The xTool F2 Ultra 60W MOPA suits detailed metal marking if you want adjustable pulse and frequency control, color engraving and a 40W diode laser in the same machine. Its Class 4 rating and desktop footprint make safety planning and workspace checks essential.
On this page (9 sections)
- What does the xTool F2 Ultra 60W MOPA offer?
- How does MOPA control help with metal marking?
- Is the 60W MOPA suited to deep engraving and metal cutting?
- What can the 40W diode laser add?
- Is its work area large enough for your projects?
- What do the cameras and automation features do?
- What should you plan for before buying?
- xTool F2 Ultra 60W MOPA review: who should choose it?
- Frequently asked questions
The xTool F2 Ultra 60W MOPA suits detailed metal marking if you want adjustable pulse and frequency control, color engraving and a 40W diode laser in one machine. It also has a Class 4 rating, so your workspace and safety setup deserve attention before you focus on speed or color effects.
Its strongest fit is a maker who expects to mark metals in different ways and also wants a diode laser for nonmetal materials. If metal work is only an occasional need, compare the machine's footprint, weight and capabilities with a simpler setup before deciding.
For a different xTool workflow, see our xTool M1 Ultra setup guide.
For a simpler enclosed option, compare 20W laser engravers.
What does the xTool F2 Ultra 60W MOPA offer?
The F2 Ultra pairs a 60W MOPA fiber laser with a 40W diode laser. xTool describes the fiber side for metal cutting, deep engraving, color engraving, 3D embossing and black marking on aluminum, while the diode handles nonmetal materials.
xTool F2 Ultra 60W MOPA & 40W: Best for detailed metal marking
- 60W MOPA fiber laser
- 40W diode laser
- 8.7 x 8.7 in work area
- Over 100 claimed metal colors
A dual-laser desktop machine for projects that combine detailed metal marking with nonmetal work. Its MOPA controls and claimed color range suit makers who want to explore varied marks on metals.
Pros
- Adjustable pulse width and frequency
- Supports color, deep and 3D engraving on metal
- Diode laser adds nonmetal processing
- Dual cameras support positioning and preview
Cons
- Class 4 laser requires careful safety planning
- 67.9 lb weight calls for a planned setup
- The listed work area may be limiting without the conveyor
The machine measures 16.88 x 11.57 x 20.51 in and weighs 67.9 lb. Its work area is 8.7 x 8.7 in, or 8.7 x 19.7 in with the auto conveyor, so consider both where it will sit and the size of parts you plan to process.
The product is described as supporting wood, acrylic, leather, glass, rubber and fabric, along with metals such as stainless steel, titanium, brass, gold and silver. Those broad material claims don't replace checking compatibility and settings for the exact material, coating and job.
For a broader materials comparison, see fiber vs CO2 laser guide.
How does MOPA control help with metal marking?
MOPA control gives you adjustable pulse width and frequency to change how the laser interacts with metal. That flexibility is relevant when a project calls for color, fine detail, crisp textures or layered relief rather than a single basic mark.
Color is one of the F2 Ultra's central claims. xTool describes over 100 consistent colors on stainless steel and titanium, spanning seven color spectrums, and says its preset XCS files help users create a color matrix to find settings.
Treat the range as a reason to explore, not a promise that every design will look identical on every part. Material, surface condition, design and chosen settings all matter, so plan sample runs and keep a record of settings that work for your own materials.
If MOPA is new to you, what a MOPA laser is explains how pulse and frequency control relate to marking. That background can help you decide whether you need this kind of control for your projects.
Is the 60W MOPA suited to deep engraving and metal cutting?
The F2 Ultra is presented for deep metal engraving and 3D embossing, as well as cutting metal up to 2 mm thick. xTool also says it can create crisp textures and layered reliefs, with the 60W MOPA cutting metal faster and deeper than a 20W fiber laser.
Those capabilities could matter if your work includes dimensional effects or thicker metal parts. Check each material and process against the machine's instructions, and plan a test piece before estimating the time or finish for a larger order.
xTool claims the machine can reduce 3D embossing time by up to 80% compared with 20W fiber lasers. That comparison is a maker claim, not a guarantee for every design, material or workflow.
What can the 40W diode laser add?
The diode laser gives the F2 Ultra a second route for nonmetal work. xTool describes it for finer processing of nonmetal materials and says it can cut acrylic up to 20 mm and wood up to 23 mm.
That mix can be useful if your shop moves between metal tags, wood signs, acrylic parts, leather goods or other listed materials. Still, dual lasers do not remove the need to confirm a particular material and thickness are suitable for the intended process.
If you are comparing the two laser types as a shopping decision, the xTool F2 Ultra and F2 Ultra UV comparison can help clarify which platform better matches your materials. For a broader shortlist, see our best dual laser engraver guide.
Is its work area large enough for your projects?
The standard work area measures 8.7 x 8.7 in, with an optional expansion to 8.7 x 19.7 in using the auto conveyor. The larger length is aimed at longer parts and automated batch processing, while the standard area may be enough for smaller individual pieces.
Measure the full part, including the space needed to position it and any jig or fixture you use. A design can fit on screen but still be awkward to place if the physical part needs extra clearance or repeated repositioning.
The machine's footprint is about 16.88 x 11.57 in, but that is not a full workspace plan. Leave room for safe access, material handling and the setup required by the manual.
What do the cameras and automation features do?
The F2 Ultra uses two 48MP AI cameras for positioning, material detection, settings suggestions, focus and preview. xTool says the cameras raise positioning accuracy to 0.2 mm and improve precision by 60% compared with single-camera systems.
Those features may reduce setup friction for repeated placement and previewing. The stated accuracy is a manufacturer claim, so verify alignment with a test layout before engraving a valuable or hard-to-replace part.
The auto conveyor is intended to support batch processing with an expanded work area. Consider whether your work comes in repeatable sizes and quantities; automation helps most when you can prepare consistent parts and a repeatable process.
What should you plan for before buying?
Plan for Class 4 laser safety, a stable setup and enough operating space. The machine weighs 67.9 lb, so choose its permanent or semi-permanent location before it arrives and account for the effort of moving it.
Read the current safety and installation instructions before operating the machine. Confirm that your workspace, access controls, ventilation and protective measures match the manufacturer's requirements and the rules that apply where you work.
The included items are the F2 Ultra dual laser machine and a base material kit. Check whether any additional accessories needed for your projects are compatible and available before treating the included kit as a complete production setup.
xTool F2 Ultra 60W MOPA review: who should choose it?
Choose the F2 Ultra if your work calls for varied metal marking plus nonmetal processing and you expect to use the MOPA controls, color capability or 3D engraving features. The 40W diode adds flexibility, while the cameras and conveyor support positioning and repeatable workflows.
Look at alternatives if your main requirement is a smaller or more focused machine. The xTool F1 Ultra vs F2 comparison helps assess the platforms side by side, and our xTool F1 Ultra review covers that model on its own.
For a broader power comparison, the best 60W laser engraver guide can help you see where this machine fits among other 60W options. Pick the F2 Ultra when its specific combination of MOPA metal work, diode processing and expandable work area matches jobs you actually expect to run.
Frequently asked questions
What is the xTool F2 Ultra 60W MOPA best for?
The F2 Ultra 60W MOPA is best suited to makers who want detailed metal marking, including color, deep and 3D engraving, alongside a diode laser for nonmetal projects. Its 8.7 x 8.7 in work area is a key planning detail; check that it fits your typical parts and batch sizes.
Can the xTool F2 Ultra engrave color on metal?
Yes, xTool describes the F2 Ultra's MOPA fiber laser as capable of over 100 consistent colors on stainless steel and titanium. It also includes preset color files in XCS for making a color matrix.
Results depend on material and settings, so use a suitable sample before committing a finished piece.
Does the xTool F2 Ultra cut metal?
xTool says the 60W MOPA can cut metal up to 2 mm thick. The machine is also described for deep engraving, 3D embossing, color engraving and black marking on aluminum; confirm material compatibility and process requirements before planning a production job.
How large is the xTool F2 Ultra work area?
The F2 Ultra has an 8.7 x 8.7 in work area, which can expand to 8.7 x 19.7 in with the auto conveyor. Compare those dimensions with your largest design and how you position parts, since the machine's footprint alone doesn't show how much usable work area a project needs.
Is the xTool F2 Ultra a Class 4 laser?
Yes, the F2 Ultra is identified as a Class 4 laser engraver. Plan the workspace around the machine's safety requirements and follow the current manual and applicable rules for installation, operation and access; don't treat a desktop form as a reason to skip laser safety measures.
Frequently asked questions
What is the xTool F2 Ultra 60W MOPA best for?
The F2 Ultra 60W MOPA is best suited to makers who want detailed metal marking, including color, deep and 3D engraving, alongside a diode laser for nonmetal projects. Its 8.7 x 8.7 in work area is a key planning detail; check that it fits your typical parts and batch sizes.
Can the xTool F2 Ultra engrave color on metal?
Yes, xTool describes the F2 Ultra's MOPA fiber laser as capable of over 100 consistent colors on stainless steel and titanium. It also includes preset color files in XCS for making a color matrix.
Results depend on material and settings, so use a suitable sample before committing a finished piece.
Does the xTool F2 Ultra cut metal?
xTool says the 60W MOPA can cut metal up to 2 mm thick. The machine is also described for deep engraving, 3D embossing, color engraving and black marking on aluminum; confirm material compatibility and process requirements before planning a production job.
How large is the xTool F2 Ultra work area?
The F2 Ultra has an 8.7 x 8.7 in work area, which can expand to 8.7 x 19.7 in with the auto conveyor. Compare those dimensions with your largest design and how you position parts, since the machine's footprint alone doesn't show how much usable work area a project needs.
Is the xTool F2 Ultra a Class 4 laser?
Yes, the F2 Ultra is identified as a Class 4 laser engraver. Plan the workspace around the machine's safety requirements and follow the current manual and applicable rules for installation, operation and access; don't treat a desktop form as a reason to skip laser safety measures.
About this guide: Our look at xTool F2 Ultra 60W MOPA laser engraver draws on maker specs, materials and what owners report. See how we research.



