Fiber vs CO2 vs UV Laser: Which Should You Choose? (November 2026)
Pick fiber for metal, CO2 for wood and acrylic, and UV for glass and fine detail. In this fiber vs CO2 vs UV laser comparison, your main material decides the winner fast.
On this page (11 sections)
- Fiber vs CO2 vs UV laser: the quick verdict
- The 3 laser types side by side
- Which laser handles metal best?
- Which laser handles wood and acrylic best?
- Which laser handles glass and clear materials best?
- How much detail and speed do you need?
- What size and setup fits your space?
- What care and safety steps come with each type?
- How do consumables and running costs compare?
- Who should buy which laser type?
- Fiber vs CO2 vs UV laser: the final pick
Pick fiber for metal, CO2 for wood and acrylic, and UV for glass and fine detail. In this fiber vs CO2 vs UV laser guide, the material you use most decides the winner before you compare speed or price.
We compared specs, features and buyer patterns for 3 products that show each path well. The xTool F1 Ultra pairs 20W fiber with 20W diode power, the xTool F2 Ultra uses a 5W UV source, and the OMTech tube is an 80W CO2 replacement part.
Scores weigh specs, features and buyer feedback against what you're shopping for. A high score means strong fit for the material and work style in this post, not a promise that one laser does every job.
If you are new to lasers, start with what is a laser cutter and how does it work so the terms below make sense. Then use this fiber, CO2 and UV comparison to match your material list to the right source.
Fiber vs CO2 vs UV laser: the quick verdict
Fiber wins for metal, CO2 wins for wood and acrylic, and UV wins for glass and fine detail. That one rule will save you from buying power you cannot use on your main material.
A fiber laser marks and cuts metal with speed. A CO2 laser cuts wood, acrylic, leather, paper and fabric with depth.
A UV laser breaks bonds with little heat, so it handles clear, fragile and heat sensitive pieces with clean edges.
Many beginners want a single machine for everything. That is fair, but each source has a sweet spot.
The F1 Ultra tries to bridge metal and craft materials with two sources. The F2 Ultra focuses on UV detail.
The OMTech tube keeps a CO2 machine running.
Ask what 80 percent of your work will be. If that answer is metal jewelry, tags and tools, start with fiber.
If it is wood signs, acrylic sheets and puzzle parts, start with CO2. If it is glass gifts and crystal, start with UV.
Our How to Choose a Laser Engraver: A Complete Buying Guide walks through size, power and budget after you pick a source. Read both guides together and your shortlist will shrink fast.
The 3 laser types side by side
Fiber, CO2 and UV differ in wavelength, heat and the materials they process best. Those 3 facts explain most of the results you will see in photos and videos.
Fiber lasers use a solid state source and work well on metals. They mark stainless steel, brass, copper, gold, silver, titanium and aluminum with clear contrast.
They also cut thin metal sheet when power and focus are right.
CO2 lasers use gas and produce a beam that wood and acrylic absorb well. That is why CO2 machines cut plywood, MDF, acrylic and paper with smooth edges.
The F1 Ultra diode side is not CO2, but its 20W diode laser shows how a different source can cover wood and acrylic in a dual system.
UV lasers use short wavelength light with high photon energy. xTool says UV breaks molecular bonds with minimal heat, so it can process crystal, glass, acrylic, ceramics, plastic and silicone with clean edges. The F2 Ultra spot is under 10 microns, which is why fine lines stay sharp.
| Choice | Best materials | Strength | Limit |
|---|---|---|---|
| Fiber | Metal, some plastic | Fast metal marking and thin metal cutting | Not best for thick wood or acrylic |
| CO2 | Wood, acrylic, leather, paper, fabric, glass surface | Deep cutting and clean craft cuts | Needs tube care and water cooling |
| UV | Glass, crystal, clear acrylic, plastic, ceramic | Fine detail and low heat | Lower power for thick cutting |
Which laser handles metal best?
Fiber is the clear pick for metal marking and thin metal cutting. If your shop makes tags, jewelry, tools or nameplates, fiber should be your first look.
The xTool F1 Ultra has a 20W fiber laser that xTool says engraves all metals in seconds. That list includes gold, silver, copper, stainless steel, brass and titanium.
Speed matters here because metal parts are often small and need fast, repeatable marks.
For cutting, the F1 Ultra fiber side handles thin sheet. xTool lists up to 0.3mm stainless steel, 0.4mm brass and 0.2mm aluminum. Those are thin sheets, not thick plate.
Plan your work around that limit.

The F1 Ultra pairs 20W fiber for metal with 20W diode for wood and acrylic, so one desktop machine covers both sides of this comparison.
See it on AmazonCO2 lasers can mark some coated metals, but bare metal is not their strength. UV lasers can mark plastics and glass well, but they are not the first pick for metal sheet cutting.
For a closer head to head, see fiber vs co2 laser.
Which laser handles wood and acrylic best?
CO2 is the classic pick for wood and acrylic cutting. It gives depth, clean edges and steady cuts through sheets that fiber machines often only mark.
The OMTech 80W CO2 tube shows why CO2 remains popular. It is built for acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone and wood.
Its 80W power, 5mm focused beam spot and 10,000 hour service life point to steady production use.

This 80W CO2 tube keeps an 80W machine cutting wood, acrylic and paper when the old tube fades.
See it on AmazonThe F1 Ultra takes a different route with a 20W diode laser. xTool says the diode side can cut up to 15mm wood and 12mm black acrylic. That makes the F1 Ultra useful for wood and acrylic without a CO2 tube.
For a full CO2 machine pick, see the Best CO2 Laser Engraver guide. For wood focused buys, the Best CO2 Laser For Wood guide narrows the field by board work.
Which laser handles glass and clear materials best?
UV is the best pick for glass, crystal and clear acrylic. It gives fine detail inside glass and clean work on pieces that heat can damage.
The xTool F2 Ultra is built around that strength. xTool says it does 3D engraving inside glass and crystal with the surface left untouched. It also handles surface engraving, embossing, cutting and rotary engraving for wine bottles, trophies and gifts.

The F2 Ultra UV source is made for glass, crystal and clear acrylic, with a spot under 10 microns for fine lines.
See it on AmazonHeat is the issue with glass and clear plastic. CO2 can engrave glass surfaces, but it can also crack or frost in ways that need care.
UV uses a cold light process, so xTool says it gives clean edges with no charring, burning or yellowing.
If you plan to compare UV with fiber for clear plastic and glass, read fiber vs uv laser. That post helps when your choice is between metal speed and glass detail.
How much detail and speed do you need?
UV gives the finest detail, fiber gives fast metal work, and CO2 gives deep craft cuts. Speed numbers alone do not tell the whole story, because each source spends its power in a different way.
The F2 Ultra runs at 15,000mm/s and uses a UV spot under 10 microns. That mix suits small text, photo detail and batch glass gifts. xTool also says its vector fitting gives 0.001mm resolution for crisp lines.
The F1 Ultra runs at 10,000mm/s with a 16MP camera and a 220mm x 220mm working area. That size suits larger desktop parts than many fiber machines. xTool says the area can expand to 220mm x 500mm with the auto conveyor, which is sold separately.
CO2 speed depends on tube power and material. An 80W tube like the OMTech model is about cutting depth and clean edges on sheets.
A small part may finish fast, but a thick wood cut will still take time.
Ask for line width, not just speed. Fine jewelry text needs a small spot.
Large wood signs need power and travel room. Glass gifts need low heat and precise focus.
What size and setup fits your space?
Desktop fiber and UV machines fit small shops, while CO2 tube systems need more room and cooling. Size is not just the cabinet.
It is the work area, airflow, power and safe access around the machine.
The F1 Ultra measures 18 x 17 x 24 inches and weighs 43.8 pounds. Its 220mm x 220mm area suits desktop metal parts, wood pieces and acrylic blanks.
The enclosed cover filters strong light and smoke extraction removes smoke, xTool says.
The F2 Ultra weighs 49.6 pounds and is fully enclosed for safe work in tight spaces. That design suits craft fairs and on the spot gifts. xTool says it supports a conveyor for batch work and a rotary accessory for tumblers, but those are extra items to plan for.
A CO2 tube is only one part of a system. The OMTech tube is 1250mm long and 80mm wide, with water tubing and ports for cooling.
It needs a water pump or chiller and a machine built for that tube size.
Measure your table, doorways and power outlet before you buy. A laser that fits the room will get used more than a stronger machine that stays in a corner.
What care and safety steps come with each type?
All 3 types need eye protection, ventilation and a clear work plan. Laser class matters, and the F1 Ultra and F2 Ultra are both Class 4 machines.
Class 4 means the beam can harm eyes and skin. Never look into the beam or open the machine while it runs.
Use the enclosed cover, emergency stop and safety alarms where fitted, and follow the manual for each model.
Fiber systems need lens care and clean optics. A dirty lens can weaken the beam and ruin fine marks.
Keep metal dust and smoke away from the lens area and follow the maker cleaning steps.
CO2 systems need water cooling and tube care. The OMTech tube has integrated water tubing and ports for a pump or chiller.
Low or warm water can hurt the tube, so check flow and temperature as the manual directs.
UV systems need the same care as other compact lasers. Keep the cover closed, use extraction for fumes and test settings on scrap pieces first.
Glass and plastic can still produce fumes that need ventilation.
How do consumables and running costs compare?
CO2 has tube replacement, fiber has lens and optics care, and UV has source and accessory costs. The purchase price is only part of the cost picture.
A CO2 tube is a wear part. The OMTech tube lists a 10,000 hour service life, a 16 month warranty in one bullet and a 9 month warranty in specs, so check the exact terms before you buy.
When output fades, cuts get slow and edges get rough.
Fiber lasers avoid gas tubes, but they still need clean lenses, proper focus and sometimes replacement optics. Metal dust can build up fast in a busy shop, so cleaning is part of daily use.
UV systems avoid CO2 tubes too, but fine detail work can be slower on thick pieces. If you add a rotary or conveyor, those parts add cost.
The F2 Ultra includes the machine and a base material kit, xTool says.
Buy the source that fits your main material first. A cheaper machine that cannot process your best seller will cost more in missed sales.
Who should buy which laser type?
Buy fiber for metal shops, CO2 for wood and acrylic shops, and UV for glass and detail shops. That rule is simple, but it holds up when you list your top 5 products.
Choose fiber if you sell metal tags, pet tags, jewelry, tools, nameplates and small parts. The F1 Ultra fits this group because its fiber side marks metal fast and its diode side adds wood and acrylic.
Choose CO2 if you cut plywood, MDF, acrylic sheets, leather, paper and fabric. A full CO2 machine cuts deeper than a compact diode or UV system.
If you already own a CO2 machine, the OMTech tube is a replacement part, not a new machine.
Choose UV if you sell glass gifts, crystal trophies, clear acrylic, ceramics and plastic parts. The F2 Ultra fits this group because its 5W UV source gives inner glass detail and clean edges on heat sensitive pieces.
Choose a dual system if your orders mix metal with wood or acrylic. The F1 Ultra is built for that mix.
Choose UV if glass is your main seller and metal is only a side item.
Try this fiber vs CO2 vs UV laser test on paper. Write your top 3 materials, your thickest part and your smallest text size.
The source that covers all 3 is your safest buy.
Fiber vs CO2 vs UV laser: the final pick
Pick fiber for metal, CO2 for wood and acrylic, UV for glass and fine detail. Your main material should make the choice in under a minute.
If you want one desktop machine that covers metal plus wood and acrylic, the xTool F1 Ultra 20W Fiber & Diode is the strongest fit here. It pairs 20W fiber with 20W diode, cuts up to 15mm wood and 12mm black acrylic, and cuts thin metal sheet.
If glass, crystal and clear plastic are your core products, the xTool F2 Ultra UV Laser Engraver is the focused pick. Its 5W UV source, spot under 10 microns and 15,000mm/s speed suit fine inner glass work.
If you own a compatible 80W CO2 machine, the OMTech 80W CO2 Laser Tube for Laser is the practical replacement pick. It restores cutting power for wood, acrylic, leather, paper and more when a tube fades.
Start with your best seller, not your longest wish list. Then check size, safety, ventilation and cooling before you order.
Frequently asked questions
Which is better, fiber, CO2 or UV laser?
Fiber is better for metals, CO2 is better for wood, acrylic and paper, and UV is better for glass, crystal and heat sensitive plastic. Most shops choose by the material they process most each week, not by top speed alone.
Can a UV laser cut wood and metal?
A UV laser can mark many materials, but a 5W UV system is built for fine engraving, not deep wood cutting or thick metal cutting. For thick wood, a CO2 machine cuts faster.
For metal sheet, a fiber laser cuts thin metal more directly.
Is a CO2 laser better than fiber for wood?
Yes, CO2 lasers usually cut wood and acrylic more cleanly and deeply than fiber lasers of similar power. A fiber laser can mark wood, but CO2 power suits thicker boards, plywood and acrylic sheets that need full cuts.
What does a CO2 laser tube replacement need?
It needs a machine built for that exact tube size and power, plus water cooling and the correct high voltage setup. The OMTech tube here is 1250mm long and 80mm wide, so check your machine fit before you order a replacement.
Which laser is best for glass engraving?
UV is often best for glass because it can engrave inside crystal and glass while keeping the surface clean. CO2 can engrave glass surfaces, but UV gives finer inner detail and cleaner edges on transparent and heat sensitive pieces.
About this guide: Our look at fiber vs CO2 vs UV laser draws on maker specs, materials and what owners report. See how we research.



