9 Best Replacement Blades for Silhouette Cameo (November 2026)
The best Silhouette Cameo replacement blades include the Replacement Silhouette Blade for Cameo for broad Silhouette compatibility, the Silhouette Cameo 4 Auto Blade with Sintered for automatic Cameo 4 cuts, and the Silhouette America Cameo 3 Auto Blade Replacement for Cameo 3 owners.
On this page (4 sections)
The best Silhouette Cameo replacement blades are the Replacement Silhouette Blade 3-Pack for broad machine compatibility, the Cameo 4 AutoBlade for automatic adjustment, and CB09 sets for manual blade-angle control. If you’re comparing cutter machines first, read Cricut Maker vs Maker 3.
If you are still choosing a machine, compare Silhouette Cameo vinyl cutters.
A simple ratchet blade suits many daily jobs. An AutoBlade suits a machine that reads the setting from software.
A CB09 set suits people who want to swap blade angles for different materials.
The right choice depends on your Cameo generation, the materials you cut most, and how often you switch materials during a session. A blade that feels right for thin vinyl may not suit cardstock or fabric.
A blade that fits the wrong Cameo generation can waste time and material. It can also leave you with a tool that will not sit properly in the holder.
If you use a Cricut Explore, see Cricut Explore replacement blades. If you also use a Joy Xtra, see Cricut Joy Xtra replacement blades.
Check your machine first, then choose between a simple replacement, an AutoBlade or a multi-angle set. Compatibility is the gate, and adjustment style only helps if the blade fits.
For Brother cutters, see Brother ScanNCut replacement blades.
If you cut one material all week, a focused replacement may be enough. If you move between vinyl, paper, fabric and thicker stock, a set with more options may save repeated purchases.
If you are new to this type of machine, start with our guide to what is a vinyl cutting machine. You can also compare the best Silhouette vinyl cutters before buying accessories.
Judge the picks below by fit, not by looks alone. A less familiar brand can be the safer buy when its stated machine list matches yours.
A correct test cut tells you more than the number printed on a pack. Make that test on the same material and mat you plan to use for the full job.
Our picks at a glance
-
1
Best for broad Silhouette compatibilityReplacement Silhouette Blade for Cameo
9.7/10 our score
See it on Amazon -
2
Best for automatic Cameo 4 cutsSilhouette Cameo 4 Auto Blade with Sintered
9.6/10 our score
See it on Amazon -
3
Best for Cameo 3 ownersSilhouette America Cameo 3 Auto Blade Replacement
9.5/10 our score
See it on Amazon
- 4
Check itEVISWIY CB09 Blades for Silhouette Cameo 4/4
Best for mixed blade angles - 5
Check itGWCASE Case Compatible with Silhouette for Cameo
Best for blade storage - 6
Check itTHANMAO CB09 CB09U Blade Holder Base Compatible
Best for a large manual blade supply - 7
Check itGeneric 30 45 60 Degree 15pcs Cutting
Best for Cameo 4 angle variety - 8
Check itPRMNIKRE 15pack 30 45 60 Degree Cut
Best for a Cameo 4 replacement set - 9
Check itwolovo 30 45 60 Degree 15pcs Plotter
Best for Cameo 4 and Portrait 3 users
The best Silhouette Cameo replacement blades by use
The best Silhouette Cameo replacement blade depends on compatibility first, adjustment method second and material third. The products below are ordered by score, with the strongest overall fit first.
That order is meant to save you work. You do not need to guess which type suits your machine before you read the details.
Start with the fit, then check how the blade is adjusted, then match it to vinyl, fabric, paper or thicker stock.
Replacement Silhouette Blade for Cameo: Best for broad Silhouette compatibility
- 3-pack
- 0.1 mm to 1 mm adjustable carbide ratchet blade
- Works with Cameo, Portrait and Curio
- For cardstock, vinyl, chipboard, heat transfer material and fabric
This 3-pack offers the widest Silhouette compatibility in the group. Its manual ratchet adjustment suits users who want spare blades for different materials.
Pros
- Broad machine compatibility
- 3-pack
- Adjustable carbide blade
Cons
- Manual adjustment required
The Replacement Silhouette Blade for Cameo, Portrait & Curio Machines is the strongest general choice because it works with all Silhouette cutting tools named in its specifications, including Cameo, Portrait, Curio and Silhouette SD. The 3-pack also gives you two spares for future projects.
Its 0.1 mm to 1 mm adjustable carbide ratchet blade lets you change the cutting depth by hand. For a manual vinyl project, see kiss cut vinyl by hand.
That makes it useful when you move between vinyl, cardstock, chipboard, heat transfer material and fabric.
This is a good fit for a mixed craft workspace with more than one Silhouette machine. It also suits anyone who wants a replacement that is not tied to only Cameo 3 or Cameo 4.
The trade-off is manual adjustment. Use a shallow setting for thin vinyl, make a test cut, then increase the depth only when the material is not separating cleanly.
Silhouette Cameo 4 Auto Blade with Sintered: Best for automatic Cameo 4 cuts
- Cameo 4 only
- Software-controlled adjustment from 0.1 mm to 1 mm
- Sintered tungsten alloy
- For paper, cardstock, vinyl, HTV and sticker sheets
This AutoBlade is the focused choice for Cameo 4 owners who want Silhouette Studio to set the blade depth. Its sintered tungsten alloy supports repeated cutting use.
Pros
- Automatic adjustment
- Cameo 4 fit
- Tungsten alloy
Cons
- Cameo 4 only
- Single blade
The Silhouette Cameo 4 Auto Blade is the best focused option for Cameo 4 owners who want automatic adjustment. Silhouette Studio controls the blade from 0.1 mm to 1 mm, so you do not need to set the depth by hand for each project.
That software link changes the routine in a practical way. You choose the material setting in the program and the machine moves the blade to match.
For repeated runs on the same material, that saves a few small steps each time.
Its sintered tungsten alloy construction suits regular cutting work. The blade is identified for paper, cardstock, vinyl, HTV and sticker sheets, making it a practical match for common Cameo 4 projects.
The single blade pack is worth noting. You get one working tool, not a set of spares for different angles.
Keep that in mind if you cut every day or if you like to swap tools mid session.
The important limitation is compatibility. This AutoBlade is made for Silhouette Cameo 4 only, so it is not the broad replacement choice in this roundup.
It will not solve the needs of a Portrait, Curio or older Cameo user.
Choose it when your priority is a software-controlled workflow. Pick the 3-pack above if you use several Silhouette generations or want three blades in one purchase.
For Cameo 4 use, a test cut on your exact material is still wise, even with automatic depth control.
Silhouette America Cameo 3 Auto Blade Replacement: Best for Cameo 3 owners
- 2-pack
- Automatic blade
- 10 height levels
- White plastic construction for Silhouette Cameo 3
Cameo 3 users get two automatic replacement blades in one set. The 10 height levels make it a direct replacement choice for that machine generation.
Pros
- Two-blade pack
- Automatic operation
- Designed for Cameo 3
Cons
- Cameo 3 only
- Not for previous versions
The Silhouette America Cameo 3 Auto Blade Replacement is the direct choice for Cameo 3 owners who want automatic operation. It comes as a 2-pack and has 10 height levels.
That pack size is useful because you can keep one blade fitted and one spare ready. When a blade begins to drag or produce rough edges, you are not waiting for a new order before you can finish a job.
Its white plastic construction and model number identify it as the Cameo 3 AutoBlade replacement. The product is designed for Silhouette Cameo 3 and will not work with previous versions.
The 10 height levels give you a set range to work from. That is different from a continuous manual dial, but it still lets you tailor the cut to the material in front of you.
Start shallow and move up in small steps.
This option makes sense when you already use a Cameo 3 and want the machine generation matched correctly. It is less useful for a mixed fleet because its compatibility is narrow.
A household with two generations will need to plan for both.
For a Cameo 4, choose the Cameo 4 AutoBlade instead. For Portrait-specific options, see Silhouette Portrait replacement blades.
For a Portrait, Curio or older Cameo setup, check the broad-compatible ratchet blade or a compatible CB09 set. Always confirm the holder fit before you commit to a full sheet of material.
EVISWIY CB09 Blades for Silhouette Cameo 4/4: Best for mixed blade angles
- 15 blades and 1 holder
- 30, 45 and 60 degree options
- Manual depth adjustment
- For vinyl, fabric, cardstock, leather and heat transfer material
This CB09 set gives you three blade angles for different cutting jobs. The 30 degree option suits fabric, thin cardboard and leather, while 45 and 60 degrees cover general and delicate cuts.
Pros
- Three blade angles
- 15 replacement blades
- Broad compatibility
Cons
- Manual adjustment
- Requires a holder
The EVISWIY CB09 set is the best choice when you want 30, 45 and 60 degree blades in one holder. It includes 5 of each angle, plus a holder, for 15 blades total.
That mix is the main appeal. Instead of buying separate blades for separate tasks, you can keep one holder and change the blade inside it.
The work then shifts to labelling and storing the spare angles so you can find them quickly.
Use the 45 degree blade for general cuts, the 60 degree blade for intricate and delicate cuts, and the 30 degree blade for fabric, thin cardboard and leather. The set is identified for Cameo 1, 2, 3 and 4, Portrait, Curio and several Graphtec plotters.
Those angle choices are not just labels. They change how the tip meets the material and how cleanly fine lines come out.
A small test cut with each angle will show you which one suits your usual designs.
These are manual blades, so you must set the cutting depth yourself. That gives you control, but it requires more setup than an AutoBlade.
Each change of material is a good moment to recheck the depth.
This is a strong match for crafters who switch between vinyl, fabric, cardstock, leather and heat transfer material. Confirm the holder fit and test the depth before starting a full sheet.
Keep the holder and spare blades in a case so the tips stay protected.
GWCASE Case Compatible with Silhouette for Cameo: Best for blade storage
- 35 compartments
- Hard EVA case
- Zipper closure
- 7.25 x 5 x 3.5 in portable organizer
This is a storage case rather than a cutting blade. Its 35 compartments help separate AutoBlades, rotary blades, holders and other Cameo accessories.
Pros
- 35 slots
- Protective EVA shell
- Detachable handle
Cons
- Box only
- Does not cut material
The GWCASE case helps keep replacement blades and holders organized, but it is not a cutting blade. Its 35 compartments give separate spaces for AutoBlades, rotary blades, premium blades, pen holders, punch tools and adapters.
That number matters when you own more than one tool type. Without separate slots, blades can knock against each other and caps can be hard to tell apart.
A case turns a loose collection into a set you can open and use at a glance.
The hard EVA case measures 7.25 x 5 x 3.5 in and uses a zipper closure. A detachable handle makes it easier to carry between a craft room and another work area.
The zipper also keeps small parts from falling out when the case is tipped or moved.
The mesh pocket adds another place for smaller accessories. That can help with adapters or spare holders that do not belong in the main slots.
It is a simple detail, but it keeps the main compartments from becoming crowded.
Choose it if loose blades are becoming difficult to sort or transport. The extra organization is especially useful if you use several blade types and want angle or machine compatibility visible at a glance.
It also helps when you travel to a class, fair or shared work space.
Remember that this is a box only. You will still need compatible replacement blades for your Cameo.
Think of the case as care and storage, not as a cutting upgrade, and pair it with the blade that fits your machine.
THANMAO CB09 CB09U Blade Holder Base Compatible: Best for a large manual blade supply
- 30 blades and 1 holder
- 10 each at 30, 45 and 60 degrees
- Manual adjustment
- For Cameo, Portrait, Curio and Graphtec plotters
The THANMAO set is the largest blade supply here. Its 30 degree blades suit fabric and thin cardboard, 45 degrees handle general cuts, and 60 degrees suit intricate or thicker materials.
Pros
- 30 replacement blades
- Three angle choices
- Includes holder
Cons
- Manual depth setting
- More parts to organize
The THANMAO CB09U set is the largest manual blade supply in this roundup, with 30 blades and 1 holder. It includes 10 blades each at 30, 45 and 60 degrees.
That scale suits a busy bench. If you cut often, having ten of each angle means you can replace a worn blade without changing your routine.
It also means you can dedicate a blade to a tricky material and keep a fresh one for clean everyday work.
The 30 degree blades suit fabric, thin cardboard and leather. The 45 degree blades cover general cuts, while the 60 degree blades suit intricate work and thicker materials.
The set is identified for cardstock, fabric, heat transfer material, transparencies, paper, vellum, adhesive vinyl and magnet paper.
The carbide construction and stated hardness are part of the value here. A harder tip is meant to hold its edge through repeated use.
Even so, material choice and depth setting still affect the result more than the label alone.
This set works with Cameo 1, 2, 3 and 4, Portrait, Curio and named Graphtec plotters. It is a good fit for a busy workspace that wants multiple replacements ready for different materials.
The trade-off is storage and manual setup. Keep the different colored caps separated, and adjust the holder gradually so you do not cut through the mat.
With 30 blades, a simple storage plan is not optional. It is what keeps this large set practical.
Generic 30 45 60 Degree 15pcs Cutting: Best for Cameo 4 angle variety
- 15 blades and 11-level holder
- 5 each at 30, 45 and 60 degrees
- HRA95 alloy
- Compatible with Portrait and Cameo 4 models
This set combines three blade angles with an 11-level holder. It suits Cameo 4 and Portrait users who want manual control over fabric, vinyl, cardstock and thicker cuts.
Pros
- Three blade angles
- 11-level holder
- HRA95 alloy
Cons
- Manual operation
- Limited to listed cutter models
The Generic 30 45 60 Degree set suits Portrait and Cameo 4-family users who want three manual blade angles. It contains 5 blades at each angle and one 11-level holder.
The 11-level holder is the control point for this set. You set the blade length by hand in small steps, which makes it easier to find a depth that cuts through without scoring the mat.
That kind of gradual adjustment is useful when you move between thin and thicker stock.
Its HRA95 alloy blades are identified for cardstock, fabric, heat transfer material, transparencies, paper, vellum, adhesive vinyl and magnet paper. The 30 degree blade is for fabric and thin cardboard, while 45 and 60 degrees cover general and delicate or deep cuts.
That material list is a good guide to daily use. Paper and vinyl are the bread and butter jobs for many owners.
Fabric and thicker stock are where the angle choice starts to matter more.
Compatibility is limited to Silhouette Portrait, Cameo 4, Cameo 4 Plus and Cameo 4 Pro. That makes it less suitable for Cameo 1, 2 or 3 owners.
If your machine is not on that list, do not force the fit.
Choose it when you want a flexible manual set for a newer Cameo. Choose the EVISWIY or THANMAO set when your machine list includes older Cameo models.
A short test cut on scrap material will confirm the holder and depth before you start paid or gift work.
PRMNIKRE 15pack 30 45 60 Degree Cut: Best for a Cameo 4 replacement set
- 15 blades and holder
- 5 each at 30, 45 and 60 degrees
- 11-level holder
- For Cameo 4, Cameo 4 Plus, Cameo 4 Pro and Portrait
This set gives current Cameo 4-family and Portrait users three blade angles plus a holder. It is useful when one blade type is not enough for your materials.
Pros
- 15 blades
- Three cutting angles
- Includes holder
Cons
- Manual depth setting
- Compatibility is narrower than broad CB09 sets
The PRMNIKRE set is another multi-angle replacement for Cameo 4-family machines and Portrait cutters. It includes 5 each of 30, 45 and 60 degree blades, plus an 11-level holder.
The balance of five per angle is easy to plan around. You get enough spares to replace a worn blade without buying a whole new set.
You also get a clear path to try each angle on your own materials and learn which one you reach for most.
The 30 degree option is aimed at fabric, thin cardboard and leather. The 45 degree option handles general fonts and vinyl film, while the 60 degree option is intended for large fonts, thick materials and deeper cuts.
The cemented carbide construction is meant to support longer cutting life.
This set suits someone who wants a broad selection without buying separate blade types. Its compatible machines are Cameo 4, Cameo 4 Plus, Cameo 4 Pro and Portrait.
That list covers the newer Cameo family well, but it leaves older machines out.
The operation is manual, even though the product data identifies an automatic operation mode. Follow the physical holder design and adjust the blade depth by hand before cutting.
In daily use, that means a test cut after every material change.
Keep the three angles labelled in storage. The holder gives you depth control, but only a tidy system will stop you from fitting the wrong blade by mistake.
wolovo 30 45 60 Degree 15pcs Plotter: Best for Cameo 4 and Portrait 3 users
- 15 blades and holder
- 11 adjustable cutting-depth levels
- 23.5 mm blade length and 2 mm diameter
- For Cameo 4 models and Portrait 3
The wolovo set gives newer Cameo and Portrait users three blade angles and an 11-level holder. Its stated compatibility excludes Cameo 1, 2 and 3 and Portrait 1 and 2.
Pros
- Three blade angles
- 11-level adjustment
- Includes holder
Cons
- Not for Cameo 1, 2 or 3
- Narrower compatibility
The wolovo set is best for Cameo 4, Cameo 4 Plus, Cameo 4 Pro and Portrait 3 users who want three blade angles. It includes 15 blades and one holder with 11 adjustable cutting-depth levels.
The 11 levels give you a practical range for everyday tuning. You can start with a shallow setting for thin material and increase the depth only when the cut needs it.
That approach protects the mat and helps you learn what each material really requires.
The blades are identified as 30, 45 and 60 degrees. The 30 degree blade suits thin and light materials such as fabric, the 45 degree blade covers general cutting, and the 60 degree blade suits intricate and delicate work.
The set is identified for cardstock, fabric, heat transfer material, transparencies, paper, vellum, adhesive vinyl and magnet paper.
Its stated dimensions are 23.5 mm blade length and 2 mm diameter. The holder uses bearings, and the blades are made from tungsten steel.
The stated HRA95 hardness is meant to support sharp, durable cutting on fine detail.
Compatibility is the key limit. This set is not for Silhouette Cameo 1, 2 or 3, or Portrait 1 or 2.
That makes it a newer machine choice, not a general Silhouette option.
Check your machine model before choosing it. If your model matches, keep the blades sorted by angle and test the depth on scrap before you cut a full design.
How to choose a Silhouette Cameo replacement blade
Choose by machine generation before comparing blade material or angle. Cameo 4 owners can use the Cameo 4 AutoBlade or compatible multi-angle sets, while Cameo 3 owners need the Cameo 3 Auto Blade Replacement or a confirmed compatible manual set.
A blade can look right and still belong to the wrong holder or machine family. Read the compatibility list as a hard filter, not as a suggestion.
For the widest Silhouette compatibility, the 3-pack ratchet blade is the simplest starting point. It fits Cameo, Portrait, Curio and Silhouette SD tools and gives you manual control from 0.1 mm to 1 mm.
Manual control has a learning curve. You will need to adjust the depth when you change materials, and a test cut is part of that process.
The benefit is that you can fine tune the cut instead of relying on a preset.
For fabric, look for a 30 degree blade in a compatible holder. EVISWIY, THANMAO, Generic, PRMNIKRE and wolovo identify their 30 degree blades for fabric or thin cardboard.
For thicker materials, a 60 degree blade is the angle choice identified for deeper or thicker cuts in the CB09 sets. That does not mean every machine can cut every thick material, so use a test cut first.
If you want automatic settings, choose the AutoBlade matched to your machine. The Cameo 4 AutoBlade is for Cameo 4, while the white 2-pack is for Cameo 3.
For additional fabric equipment, see our guide to the best laser engraver for fabric. Paper crafters can also compare the best kraft paper for laser cutting before planning mixed-material projects.
Storage should be part of the decision too. A set with three angles needs a place to keep them apart.
A case with slots makes the system easier to use and helps protect the tips.
How to set up and care for Cameo replacement blades
Start with the correct holder and remove any protective cover before cutting. Manual CB09-style blades need their depth adjusted by hand, while an AutoBlade uses the machine or software settings.
A blade left in its cover, or set to the wrong depth, will not behave as the design expects. Take the time to confirm the blade, the holder and the setting before you load the mat.
Use a small test cut whenever you change material, blade angle or depth. A shallow setting may leave the material attached, while an excessive setting can cut into the mat.
Use the same material and the same mat for the test cut as for the final job. That check prevents many failed cuts and saves material.
Keep blades in a case if you have several angles or machine generations. The GWCASE organizer has 35 compartments and can separate holders, AutoBlades and other Cameo tools.
Handle every blade carefully because the cutting tips are sharp. Store blades tip up or in their slots so they do not roll or knock against other tools.
Replace a blade when clean cuts become difficult after checking the material setting, mat condition and design. A worn tip often shows up as rough edges, missed fine lines or a need to increase depth for no clear reason.
For machine setup help, follow our guide on how to use Silhouette Cameo 5. If your machine has a power problem rather than a cutting problem, see the best Silhouette Cameo replacement power cord guide.
Verdict: which replacement blade should you choose?
The Replacement Silhouette Blade for Cameo, Portrait & Curio Machines is the best overall pick for broad compatibility, a 3-pack and adjustable cutting depth. Choose the Cameo 4 AutoBlade for automatic operation, or the Cameo 3 2-pack when you own that machine generation.
Pick EVISWIY for a balanced 15-blade angle set, THANMAO for 30 replacement blades, and the smaller Generic, PRMNIKRE or wolovo sets when their stated machine compatibility matches your Cameo. Each of those choices is about fit and the materials you cut most.
If you cut mainly one material, keep the decision simple. A focused replacement with the right holder may be all you need.
If you switch often, the extra angles and spare blades can be worth the added setup.
If you use a Silhouette Cameo 5, compare the machine's supported tools before ordering older replacement blades. Our Silhouette Cameo 5 Alpha reviews can help you plan that upgrade.
Match the blade to the machine, test the depth on scrap, and store spares where you can see them. That routine will give you cleaner cuts than buying a larger set and hoping for the best.
Our top 3 picks at a glance
-
1
Best for broad Silhouette compatibilityReplacement Silhouette Blade for Cameo
9.7/10 our score
See it on Amazon -
2
Best for automatic Cameo 4 cutsSilhouette Cameo 4 Auto Blade with Sintered
9.6/10 our score
See it on Amazon -
3
Best for Cameo 3 ownersSilhouette America Cameo 3 Auto Blade Replacement
9.5/10 our score
See it on Amazon
Frequently asked questions
What is the best Silhouette Cameo replacement blade?
The Replacement Silhouette Blade for Cameo, Portrait & Curio Machines is the best broad-use choice because it fits Cameo, Portrait, Curio and Silhouette SD tools, comes in a 3-pack and adjusts from 0.1 mm to 1 mm. Choose the Cameo 4 AutoBlade if automatic depth adjustment matters more.
Which Silhouette Cameo blade is best for vinyl?
A standard adjustable blade or a 45 degree CB09 blade suits most vinyl cutting. The Replacement Silhouette Blade adjusts from 0.1 mm to 1 mm, while the CB09 sets provide manual 45 degree options for general vinyl work.
Always start with a shallow setting and adjust only as needed.
Is a Silhouette Cameo fabric blade different?
A 30 degree blade is the fabric-focused option among these products. The EVISWIY, THANMAO, Generic, PRMNIKRE and wolovo sets identify 30 degree blades for fabric, thin cardboard and leather.
Match the blade to your machine and set the depth gradually.
What is the difference between a Silhouette Cameo AutoBlade and a manual blade?
An AutoBlade adjusts through the machine or software, while a manual blade requires you to set the depth. The Cameo 4 AutoBlade is made for Cameo 4 only, and the Cameo 3 Auto Blade Replacement is designed for Cameo 3.
CB09 sets offer manual angle choices.
Can these blades cut thick materials?
Some options are intended for thicker materials, but the correct choice depends on the machine, material and blade setting. A 60 degree blade is the thick-material option in the CB09 sets, while the 30 degree blade is aimed at fabric and thin cardboard.
Make test cuts first.
About this guide: Our look at Silhouette Cameo replacement blades draws on maker specs, materials and what owners report. See how we research.



