8 Best Replacement Blades for Cricut Explore (November 2026)
The best Cricut Explore replacement blades include the Cricut Replacement Knife Blade for thick Maker projects, the Cricut Premium Fine-Point Replacement Blade for everyday Explore cuts, and the Likart 6-Pack Paper Cutter Replacement Blade kit for paper trimmers.
On this page (8 sections)
- Best Cricut Explore replacement blades for daily and thick cuts
- Best Cricut Explore replacement blades compared
- How we compared these blades
- Which blade type do I need for my Explore?
- How do I choose between Explore, Explore One, Air and Air 2 blades?
- When should I replace a blade and how do I care for it?
- Are third party blades worth it for Explore machines?
- Verdict: best Cricut Explore replacement blades
The best Cricut Explore replacement blades for most owners are the Cricut Premium Fine-Point Replacement Blade for daily cuts and a deep point set for thicker stock. The fine point 10 pack covers vinyl, iron on, cardstock and poster board on Explore, Explore One, Explore Air and Explore Air 2.
Deep point blades cover chipboard, foam, magnets and stiff felt.
This guide compares eight options by score, from a Maker knife blade at the top to a fabric specific set at the end. Not every pick fits an Explore machine, so read the compatibility line for each one before you order.
Our score weighs specs, features and buyer feedback against what you're shopping for.
Blade choice is really a material choice. Fine point blades protect detail on thin stock and give clean edges on vinyl and iron on.
Deep point blades trade some fine detail for reach through dense stock. Bonded fabric blades are built for fabric that has a backing layer, which changes pressure and depth.
If you are new to vinyl cutting in general, start with what is a vinyl cutting machine to see how blades, mats and machines work together.
Our picks at a glance
-
1
-
2
Best for everyday Explore cutsCricut Premium Fine-Point Replacement Blade
9.6/10 our score
See it on Amazon -
3
Best for paper trimmersLikart 6-Pack Paper Cutter Replacement Blade kit
9.5/10 our score
See it on Amazon
- 4
Check itUTNVBTR Deep Point Blade + Housing
Best deep cut housing set - 5
Check itAUNKZL Deep Cut Housing +5 Pcs Deep-Point
Best for materials up to 1.5 mm - 6
Check itHOOFULL 55 PCS Replacement Plotter Blades Compatible
Best large mixed blade kit - 7
Check itMoalaok 30 Packs Rubber Roller Replacement
Best for roller maintenance - 8
Check itHQMaster Bonded-Fabric Blade and Holder Compatible
Best for bonded fabric
Best Cricut Explore replacement blades for daily and thick cuts
The fine point blade is the workhorse for most Explore owners. A compatible Cricut Explore cutting mat also helps hold stock steady.
Deep point blades are the second blade to own, because they reach materials a fine point blade should not touch.
The order below follows our score, not blade type. That means a Maker only knife blade and a trimmer kit appear among Explore options, and we flag them clearly.
Use the compatibility notes to separate the Explore picks from the related picks. For Brother owners, compare Brother ScanNCut replacement blades.
Cricut Replacement Knife Blade: Best for thick Maker projects
- 12 mm length
- Hard and durable carbide steel
- Cuts balsa wood, basswood, leather, chipboard and matboard
- Compatible with Cricut Maker
A 12 mm knife blade for thicker and denser materials on a Maker, not a standard Explore fine point cut.
Pros
- Made for thicker materials
- Hard carbide steel build
- Precise cuts on wood, leather and chipboard per Cricut
Cons
- Not for Explore machines
- Requires a housing sold separately
- Not compatible with iOS and Android projects
This knife blade suits Maker owners who want to cut thicker materials at home. It is a 12 mm carbide steel blade that Cricut positions for balsa wood, basswood, tooling leather, garment leather, chipboard and matboard.
In daily use, that means puzzles, models, leather goods, dioramas and wood decor rather than everyday vinyl decals. Cricut says it precisely cuts details larger than 0.75 inches and lists thickness limits for wood, leather and chipboard in its notes.
Those limits include balsa wood up to 3/32 inch, basswood up to 1/16 inch, tooling leather up to 7 oz and garment leather up to 5 oz.
The trade off here is clear. This blade is for Cricut Maker, not for Explore machines.
It also needs a housing sold separately and Design Space on a computer, because knife blade projects are not compatible with iOS and Android devices.
Choose it only if you own a Maker and want a dedicated thick material blade. For Maker upkeep beyond blades, see Cricut Maker replacement rollers.
Explore owners should look at the fine point and deep point picks below instead.
This 10 pack suits Explore owners who cut vinyl, cardstock and iron on on a regular schedule. Each blade uses an improved German carbide steel design that Cricut says resists wear and breakage for longer life.
In daily use, you get ten replacements in one box, so a dull blade does not stop a project mid run. Cricut lists cardstock, vinyl, iron on, poster board and lightweight fabrics as suitable materials.
That range covers decals, labels, cards, signs and layered paper work, which form the bulk of Explore use. The improved design matters most on small detail, where a worn tip shows up as torn corners or ragged edges.
The key fit check is compatibility. It works with Explore, Explore One, Explore Air and Explore Air 2, plus Maker machines.
That makes it the safest first purchase for the most common Explore models.
The trade off is material range. This fine point blade is for light to mid weight stock, not leather, chipboard or thick foam.
A housing is also sold separately, so confirm you have a Premium Fine Point housing before your first cut.
Likart 6-Pack Paper Cutter Replacement Blade kit: Best for paper trimmers
- 4 cutting blades and 2 scoring blades
- Light green holder included
- For Cricut Portable Trimmer and Basic Trimmer
- Does not fit older green Cricut cutter
A trimmer blade kit with cutting and scoring blades for paper work, not for Explore machine cuts.
Pros
- Includes scoring blades for fold cards
- Holder included
- Fits Cricut trimmers and roll holder
Cons
- Not for Explore machines
- Does not fit older green Cricut cutter
- Paper trimmer use only
This kit suits paper crafters who use a Cricut trimmer for straight cuts and score lines. It includes 4 cutting blades, 2 scoring blades and a light green holder in one 6 pack.
In daily use, the scoring blades matter as much as the cutting blades. They help fold cards with clean creases, while the cutting blades trim paper, cardstock, photos and coupons.
The holder is shared and the blades are replaceable, so you can swap a dull cutting blade without buying a whole new trimmer. Likart also notes the holder comes in blue, light green and orange, with one colour per package, and offers 4 pack and 6 pack options.
The trade off is machine fit. This is a trimmer kit, not an Explore machine blade.
It fits Cricut Portable Trimmer, Basic Trimmer, the 12 inch and 13 inch trimmers and the roll holder, and it does not fit the older green Cricut cutter.
Choose it for paper trimming and card making. Do not order it as a replacement for an Explore fine point or deep point blade.
UTNVBTR Deep Point Blade + Housing: Best deep cut housing set
- 6 deep point blades plus housing
- 60 degree deep cut blade
- For Maker and Explore series
- For chipboard, thick cardstock, foam and cardboard
Six deep point blades with a housing for thicker materials on Explore Air 2, Explore One and newer Explore models.
Pros
- Housing included
- Six blades in one set
- Fits Explore One, Air, Air 2, Explore 3 and Explore 4
Cons
- Third party brand, not Cricut brand
- Deep point only, not a fine point set
This set suits Explore owners who need a deep point blade for thicker stock. It includes 6 deep point blades and a housing, so you can install one blade and keep five spares ready.
In daily use, the 60 degree deep point angle helps with chipboard, rubber sheets, thick cardstock, stiffened felt, foam sheets and cardboard. Those are materials where a fine point blade would struggle or break.
The housing has an electroplated casing and rubber sleeve safety design, which UTNVBTR presents as a durability and handling benefit. The blades are described as high quality imported German alloy, aimed at clean edges and complex cutting on thicker material.
The fit list is broad. It covers Explore One, Explore Air, Explore Air 2, Explore 3 and Explore 4, plus Maker models.
That breadth makes it a practical second blade for mixed material work.
The trade off is brand and focus. This is a third party deep point set, not a Cricut brand blade, and it does not replace a fine point blade for vinyl and fine detail.
AUNKZL Deep Cut Housing +5 Pcs Deep-Point: Best for materials up to 1.5 mm
- 5 deep point blades plus housing
- 60 degree blade angle
- For materials up to 1.5 mm thickness
- Fits Explore Air One, Air, Air 2, Air 3, Maker and Maker 3
Five deep point blades with housing for chipboard, foam, magnets and thick cardstock up to 1.5 mm.
Pros
- Housing included
- Rated for materials up to 1.5 mm
- Fits Explore Air One through Air 3
Cons
- Deep point only
- Third party brand
This set suits buyers who cut materials up to 1.5 mm and want a housing included. It includes 5 deep point blades and a deep cut housing for Explore Air and Maker models.
In daily use, the steeper 60 degree angle helps the blade enter thick stock without the damage a shallower blade can take. AUNKZL lists magnets, chipboard, stamp material, thick cardstock, stiffened felt, foam sheets and cardboard as suitable materials.
It also mentions leather, thin metals, craft foam, mat board, felt sheets and glitter cardstock in its notes. The maker claims the blade can usually be used 1000 to 2000 times, with service life 3 to 5 times that of an ordinary blade, based on its harder carbide steel.
The fit list covers Explore Air One, Explore Air, Explore Air 2 and Explore Air 3, plus Maker and Maker 3. Check whether your exact Explore model appears on that list before you order.
The trade off is focus. This is a deep point only set, so it does not cover fine point vinyl work.
The protective cover also needs care when you remove it to expose the blade.
HOOFULL 55 PCS Replacement Plotter Blades Compatible: Best large mixed blade kit
- 55 pieces total
- 2 housings and 2 tweezers
- Fine point, deep cut, thin cut and standard blades
- Compatible with Explore Air and Maker 1 2 3
A large mixed kit with fine point, deep cut and standard blades for Explore Air owners who want many angles in one box.
Pros
- Many blade angles in one kit
- Housings and tweezers included
- Fits Explore Air and Maker models
Cons
- Large kit is more than light users need
- Blade depth must be adjusted manually per maker notes
This 55 piece kit suits crafters who want many blade angles in one box. It includes housings, tweezers, fine point blades, deep cut blades, thin cut blades and standard blades.
In daily use, that mix lets you switch between lace like detail, daily vinyl and paper, and leather or heavy fabric work. HOOFULL lists vinyl, HTV, cardstock, polyester fabric, adhesive foil, magnet sheets, leather up to 2 mm and tissue paper as suitable materials.
The kit breaks down as 10 golden fine point blades, 10 black deep cut blades plus 10 at 60 degrees, 5 thin cut blades at 30 degrees and 20 standard blades at 45 degrees, with 2 housings and 2 tweezers. It uses tungsten carbide heads with 2 mm shanks and silicone caps for safety.
The fit list covers Explore Air, Maker 1 2 3 and Expression. It does not list Explore One, Explore 3 or Explore 4, so match your exact model first.
The trade off is size. A 55 piece kit is more than a light user needs, and HOOFULL notes that blade depth must be adjusted manually.
Test the cut depth after you set it, especially on a new material.
Moalaok 30 Packs Rubber Roller Replacement: Best for roller maintenance
- 30 piece set
- 8 rubber rollers, clips, tools and 10 blades
- Blades in 30, 45 and 60 degrees
- For Maker, Maker 3, Explore Air 2 and Explore Air 1
A roller and blade maintenance set for Maker 3 and Explore Air models, built around roller replacement rather than blades alone.
Pros
- Rollers and tools included
- Three blade angles included
- Fits Explore Air 1 and Air 2
Cons
- Not compatible with Maker 2 or Joy
- Mostly a roller kit, not a blade only kit
This set suits owners who need roller replacement as much as blades. It includes 30 pieces, from rubber rollers and retaining clips to tools and 10 blades in 30, 45 and 60 degrees.
In daily use, fresh rollers help the machine grip material evenly. Worn rollers can cause shifting, which no new blade can fix on its own.
The kit includes 4 rubber rollers for Maker 3, 4 for Explore Air 2, 6 retaining clip rings, 2 screwdrivers, 3 Allen wrenches and a plastic dismantling tool. The 10 blades cover paper, vinyl, fabric, PVC, adhesive paper, glitter paper, poster board, adhesive foil, vellum and lightweight wood, with individual protector sleeves.
The fit list covers Maker, Maker 3, Explore Air 2 and Explore Air 1. It is not compatible with Maker 2 or Joy, per the maker notes.
The trade off is purpose. This is a maintenance kit, not a blade only kit.
Buy it when rollers are worn or when you want spare blades in three angles with the tools to install them.
HQMaster Bonded-Fabric Blade and Holder Compatible: Best for bonded fabric
- 5 bonded fabric blades plus holder
- German carbide steel
- For polyester, silk, cotton, denim, felt and linen
- Fits Explore 3, Air 2, Air, One, Maker 3 and Maker
Five bonded fabric blades with holder for fabric with iron on backing, sold for Explore 3, Air 2, Air and One.
Pros
- Holder included
- Made for bonded fabric with backing
- Fits Explore One, Air, Air 2 and Explore 3
Cons
- Maker advises not to use for paper or vinyl
- Fabric specific, not a general purpose blade
This set suits sewists who cut bonded fabric on an Explore machine. It includes 5 bonded fabric blades and a holder, made from German carbide steel for precise fabric cuts.
In daily use, the blade is made for fabric with iron on backing, such as polyester, silk, cotton, denim, felt and linen. That backing changes how the blade should cut, compared with plain fabric.
HQMaster describes the work as intricate cuts on bonded fabrics or fabrics with an iron on backer, aimed at sewing and fabric crafts. The holder is included, so you do not need a separate bonded fabric housing to start, and the set is presented as easy to install and remove.
The fit list covers Explore 3, Explore Air 2, Explore Air, Explore One, Maker 3 and Maker. Check that your exact model is on that list before you order.
The trade off is focus. HQMaster advises not to use this blade for paper or vinyl.
Keep it for bonded fabric work, and use a fine point blade for paper and vinyl projects.
Best Cricut Explore replacement blades compared
Fine point blades win for daily vinyl and cardstock. Deep point blades win for thick stock.
Fabric and trimmer kits win only for their specific jobs.
| Product | Best for | Blade Length | Material | Compatible Devices | Our score |
|---|---|---|---|---|---|
| Cricut Replacement Knife Blade | thick Maker projects | 12 mm | Stainless steel | Cricut Maker | 9.7 |
| Cricut Premium Fine-Point Replacement Blade | everyday Explore cuts | Carbide steel | Cricut Maker and Explore | 9.6 | |
| Likart 6-Pack Paper Cutter Replacement Blade kit | paper trimmers | Stainless steel and plastic | Cricut Trimmer 12 in, 13 in and Roller Holder | 9.5 | |
| UTNVBTR Deep Point Blade + Housing | deep cut housing set | Maker 3, Maker 4, Maker, Explore 3, Explore 4, Explore Air 2, Air, One, Venture | 9.4 | ||
| AUNKZL Deep Cut Housing +5 Pcs Deep-Point | materials up to 1.5 mm | Explore Air One, Air, Air 2, Air 3, Maker, Maker 3 | 9.0 | ||
| HOOFULL 55 PCS Replacement Plotter Blades Compatible | large mixed blade kit | Cricut Explore Air, Maker 1 2 3, Expression | 8.7 | ||
| Moalaok 30 Packs Rubber Roller Replacement | roller maintenance | Cricut Maker, Maker 3, Explore Air 2, Explore Air 1 | 8.4 | ||
| HQMaster Bonded-Fabric Blade and Holder Compatible | bonded fabric | Metal, German carbide steel blade | Explore 3, Air 2, Air, One, Maker 3, Maker | 8.1 |
How the picks break down by job
Three picks cover the core Explore jobs. The Cricut fine point pack covers daily cuts, UTNVBTR and AUNKZL cover thick stock with a housing included, and HQMaster covers bonded fabric with a holder included.
HOOFULL covers many angles at once for buyers who want variety.
The other three picks solve different problems. The Cricut knife blade is a Maker thick material tool, the Likart kit is a paper trimmer kit, and the Moalaok kit is a roller maintenance set with blades added.
Those are useful products, but they should not be treated as direct Explore fine point replacements.
How we compared these blades
We checked compatibility lists, blade angle, count, housing inclusion and material range for each pick. We ranked picks by how well they match an Explore owner's most common cuts.
We also flagged picks that do not fit an Explore machine at all. A Maker knife blade and a paper trimmer kit can be strong products, but they should not be sold to you as Explore blades.
Buyer patterns mattered too. We looked at whether a set includes a housing, whether spares are included, and whether the blade type matches the materials most buyers list.
We weighed count against focus. A ten pack of one proven blade type suits a daily cutter better than a mixed kit with many angles and few spares.
A housing included set suits a first deep point buyer better than loose blades that need a separate part.
What we left out of the score
We did not rank on price, because prices change and were not part of the comparison data. We did not treat a larger count as automatically better, because a 55 piece kit and a 5 pack serve very different buyers.
Which blade type do I need for my Explore?
The answer depends on the material you cut most. Fine point blades handle vinyl, iron on, cardstock and poster board.
Deep point blades handle chipboard, foam, magnets, rubber sheets and stiff felt. Bonded fabric blades handle fabric with iron on backing.
If you only buy one blade type first, buy fine point. Most Explore projects fall into that light to mid weight group.
For machine setup help, see how to use Cricut Explore 3 and how to use Cricut Explore 4. Our best Cricut Explore machine guide also helps if you are comparing models.
Fine point blades for daily cuts
Fine point blades suit vinyl, iron on, cardstock and lightweight fabric. The Cricut Premium Fine Point 10 pack is the clearest pick here for Explore, Explore One, Explore Air and Explore Air 2.
That ten pack also suits Maker owners, but Explore fit is the reason it leads this guide. Its improved German carbide steel design is aimed at lasting sharpness, which matters on repeat cuts of the same design.
Deep point blades for thicker stock
Deep point blades suit chipboard, foam, magnets and thick cardstock. The UTNVBTR and AUNKZL sets both include a housing, which saves a separate purchase.
The 60 degree angle is the key spec to compare. It is steeper than a fine point angle, so the blade can enter dense material with less force on the tip.
Bonded fabric blades for fabric work
Bonded fabric blades suit fabric with iron on backing. The HQMaster set is made for that job and should not be used for paper or vinyl.
That restriction is a feature, not a flaw. A blade tuned for bonded fabric is tuned for a backing layer that paper and vinyl do not have.
How do I choose between Explore, Explore One, Air and Air 2 blades?
Small model differences change fit. Explore, Explore One, Explore Air and Explore Air 2 appear by name on the Cricut fine point pack.
Newer models need their own check. Explore 3 and Explore 4 appear on the UTNVBTR and HQMaster lists, but not on every other pick here.
Never buy on the Explore name alone. Match the exact machine name on the box to your machine.
If you own a Joy Xtra instead, see our best Cricut Joy Xtra replacement blades guide for that model.
What should I check before I order?
Check the compatible devices list, the blade angle, the blade count and whether a housing is included. Then check the material list for the stock you cut most.
Also check the housing type. A fine point blade, a deep point blade and a bonded fabric blade do not all use the same housing, and a knife blade uses a housing sold separately in the Cricut listing.
Should I buy a housing with the blades?
Buy a housing if you do not already own the right one for that blade type. Fine point, deep point and bonded fabric blades use different housings.
Sets from UTNVBTR, AUNKZL and HQMaster include a housing, while the Cricut fine point ten pack does not. Factor that into which set you choose first.
When should I replace a blade and how do I care for it?
Replace a blade when cuts start to tear, drag or leave rough edges on material it used to cut cleanly. Dull blades force the machine to work harder and can damage mats.
Store blades in their protective caps or sleeves. Keep them dry and separate from tools that can knock the tip.
Do not use a fabric blade on paper or vinyl, and do not use a fine point blade on thick stock. The wrong material is a common cause of early blade damage.
A power issue can also look like a blade problem. If the machine will not start, check our best Cricut Explore power cord guide before you assume the blade is at fault.
How do I check blade wear on scrap material?
Run a small test shape on scrap stock you already cut well. If corners tear, edges fray or the cut needs extra passes, the tip is likely worn.
Swap the blade and repeat the same test. A clean cut with the new blade confirms wear, while the same result points to settings, mat grip or material choice.
Are third party blades worth it for Explore machines?
Third party sets can offer more blades or a housing at a lower cost per blade. The UTNVBTR, AUNKZL, HOOFULL and HQMaster picks all fall into that group.
The trade off is fit and consistency. Match the model list exactly, and test the cut depth on scrap material before a final project.
Cricut brand fine point blades remain the safest first choice for Explore, Explore One, Explore Air and Explore Air 2.
Third party deep point sets are easiest to justify, because you get a housing and several spares in one box. Third party mixed kits suit experimenters who want to try 30, 45 and 60 degree angles before committing to one blade type.
Verdict: best Cricut Explore replacement blades
Pick the Cricut Premium Fine-Point Replacement Blade if you cut vinyl, iron on and cardstock on Explore, Explore One, Explore Air or Explore Air 2. Pick a deep point housing set if chipboard, foam or stiff felt are regular materials.
Pick the HQMaster bonded fabric set only for bonded fabric, and skip the Maker knife blade and trimmer kit unless you own those machines.
For broader craft equipment, our best all in one laser engraver guide covers a different machine category. If you move into laser work later, our guide on why is my laser engraving light on one side helps with uneven results.
Our top 3 picks at a glance
-
1
-
2
Best for everyday Explore cutsCricut Premium Fine-Point Replacement Blade
9.6/10 our score
See it on Amazon -
3
Best for paper trimmersLikart 6-Pack Paper Cutter Replacement Blade kit
9.5/10 our score
See it on Amazon
Frequently asked questions
Which blade should an Explore owner buy first?
Buy a fine point blade first for vinyl, iron on and cardstock. The Cricut Premium Fine-Point 10 pack fits Explore, Explore One, Explore Air and Explore Air 2.
Add a deep point blade only when you cut thicker stock.
Are deep cut blades the same as fine point blades?
No. Deep point blades have a steeper angle and reach thicker material.
Fine point blades suit lighter stock and finer detail.
Using the wrong type can bend a blade or tear a clean edge.
Can Explore machines use a Maker knife blade?
No. The Cricut Replacement Knife Blade in this guide is for Cricut Maker machines.
It needs a Maker and a housing.
Explore owners should choose fine point, deep point or bonded fabric blades made for Explore models.
How do I know if a blade fits my Explore model?
Check the model list on the box before you order. Explore, Explore One, Explore Air, Explore Air 2, Explore 3 and Explore 4 do not all share the same lists.
Match the exact machine name, not just the Explore family name.
About this guide: Our look at Cricut Explore replacement blades draws on maker specs, materials and what owners report. See how we research.



