Best picks

5 Best Cricut Joy Xtra Replacement Blades (November 2026)

Updated on · By the Handyloom team

The best cricut joy xtra replacement blades include the Cricut Replacement Knife Blade for thick Maker cuts, the THANMAO 20 PCS Replacement Cutting Blades Compatible for Joy Xtra vinyl work, and the Likart 6-Pack Paper Cutter Replacement Blade kit for Cricut trimmer paper work.

On this page (15 sections)
  1. Cricut joy xtra replacement blades at a glance
  2. Cricut Replacement Knife Blade: Best for thick Maker cuts
  3. THANMAO 20 PCS Replacement Cutting Blades Compatible: Best for Joy Xtra vinyl work
  4. Likart 6-Pack Paper Cutter Replacement Blade kit: Best for Cricut trimmer paper work
  5. UTNVBTR Deep Point Blade + Housing: Best for deep cuts in wider Cricut machines
  6. Likart 2 Pcs Knife Replacement Blades: Best for Maker knife blade projects
  7. Best Cricut Joy Xtra replacement blades at a glance
  8. How we compared these blades
  9. Do Cricut Joy Xtra blades fit older Cricut machines?
  10. How do Cricut Joy Xtra replacement blades work for vinyl?
  11. Which count is best: single blades or multi-packs?
  12. What materials can each blade type cut?
  13. How do you change a Cricut Joy Xtra blade safely?
  14. Should you buy a bundle with your replacement blades?
  15. The verdict on the best Cricut Joy Xtra replacement blades

The best Cricut Joy Xtra replacement blades for most Joy Xtra owners are the THANMAO 20 PCS Replacement Cutting Blades Compatible, because they are made for Joy and Joy Xtra machines. The top scored blade in this group is a Maker knife blade, so machine fit matters more than score alone.

Use this list as a fit check before you shop. One pick is a true Joy Xtra standard blade.

The rest cover Maker knife work, deep point work, or manual trimmer work, and each one suits a different machine and material.

If you are still deciding between machines, start with our Cricut Joy Xtra vs Joy comparison. For setup steps after a blade change, read how to use Cricut Joy Xtra.

For wider machine terms, our guide to what is a vinyl cutting machine explains the basic cutting setup.

Our picks at a glance

  1. 1 Cricut Replacement Knife Blade
    Best for thick Maker cuts

    Cricut Replacement Knife Blade

    9.7/10 our score

    See it on Amazon
  2. 2 THANMAO 20 PCS Replacement Cutting Blades Compatible
    Best for Joy Xtra vinyl work

    THANMAO 20 PCS Replacement Cutting Blades Compatible

    9.6/10 our score

    See it on Amazon
  3. 3 Likart 6-Pack Paper Cutter Replacement Blade kit
    Best for Cricut trimmer paper work

    Likart 6-Pack Paper Cutter Replacement Blade kit

    9.5/10 our score

    See it on Amazon
  1. 4UTNVBTR Deep Point Blade + Housing

    UTNVBTR Deep Point Blade + Housing

    Best for deep cuts in wider Cricut machines
    Check it
  2. 5Likart 2 Pcs Knife Replacement Blades

    Likart 2 Pcs Knife Replacement Blades

    Best for Maker knife blade projects
    Check it

Cricut joy xtra replacement blades at a glance

1

Cricut Replacement Knife Blade: Best for thick Maker cuts

Cricut Replacement Knife Blade, cricut joy xtra replacement blades
9.7/10Our score
  • 12 mm length
  • Hard and durable carbide steel
  • Cuts balsa wood up to 3/32 in
  • Cuts basswood up to 1/16 in
  • Cuts tooling leather up to 7 oz
  • Cuts garment leather up to 5 oz
  • Cuts Cricut chipboard 2 mm
  • Cuts matboard 2-ply or 4-ply
  • Cuts craft foam up to 3 mm
  • Requires housing, sold separately
  • Works with Cricut Maker
  • Requires Design Space computer software

A 12 mm knife blade for thick and dense materials in a Cricut Maker, not a Joy Xtra standard blade. It suits wood, leather, chipboard, matboard and craft foam projects.

See it on Amazon

Pros

  • 12 mm carbide steel knife blade
  • Handles thick and dense materials
  • Cuts listed wood, leather, chipboard and foam thicknesses

Cons

  • Made for Cricut Maker, not Joy Xtra
  • Housing is sold separately
  • Computer software is required

Cricut Replacement Knife Blade: Best for thick Maker cuts

The Cricut Replacement Knife Blade is a 12 mm knife blade for thick and dense materials in a Cricut Maker. It is not a Joy Xtra standard blade, so fit is the first limit to note.

Cricut says the blade is harder and more durable carbide steel. It can precisely cut images or details larger than 0.75 inches.

That size limit matters for small lettering and fine vinyl details.

The stated material range covers balsa wood up to 3/32 inches, basswood up to 1/16 inches, tooling leather up to 7 oz, garment leather up to 5 oz, Cricut chipboard 2 mm, matboard 2-ply or 4-ply, and craft foam up to 3 mm. Those limits point to puzzles, models, leather goods, dioramas and wood decor.

It works with housing in a Cricut Maker and requires Design Space computer software. Knife Blade projects are not compatible with iOS and Android devices.

Housing is sold separately, so the blade alone does not complete the setup.

Choose it for Maker work with thick materials. Skip it for a Joy Xtra, where the THANMAO standard blades are the direct fit in this group.

Cricut Replacement Knife BladeCheck it on Amazon
2

THANMAO 20 PCS Replacement Cutting Blades Compatible: Best for Joy Xtra vinyl work

THANMAO 20 PCS Replacement Cutting Blades Compatible, cricut joy xtra replacement blades
9.6/10Our score
  • 20 replacement blades
  • Compatible with Joy and Joy Xtra
  • For vinyl and fabric projects
  • Suitable for media up to 0.25 mm thick
  • Germany tungsten steel
  • High quality stainless steel
  • Alloy tip
  • Plastic case protects blade tips
  • Rubber cover protects fingers

Twenty standard replacement blades made for Joy and Joy Xtra vinyl and fabric work up to 0.25 mm. The large count suits frequent cuts, labels, cards, banners and decals.

See it on Amazon

Pros

  • Made for Joy and Joy Xtra
  • 20 blades in one pack
  • Plastic case and rubber covers protect tips and fingers

Cons

  • Blades do not adjust cutting depth
  • Depth must be set before cutting
  • Manual adjustment is needed for different materials

THANMAO 20 PCS Replacement Cutting Blades Compatible: Best for Joy Xtra vinyl work

The THANMAO 20 PCS Replacement Cutting Blades Compatible are made for Joy and Joy Xtra machines. For mat options matched to this machine, see our Cricut Joy Xtra cutting mat guide.

That direct fit makes them the safest pick for standard Joy Xtra vinyl and fabric work.

The pack holds 20 blades. That count suits people who cut labels, decals, banners, cards and wall art on a regular basis.

A large pack also lets you keep a fresh blade ready without waiting for a single replacement to arrive.

THANMAO says the blades suit media up to 0.25 mm thick. Use them on tote projects, mugs, holiday party decor and newborn gift projects within that thickness range.

The blades are described as Germany tungsten steel and high quality stainless steel with an alloy tip.

A plastic case protects the tips from scratches. Each blade also comes wrapped in a rubber cover.

Pull the cover off during use, and handle the tip with care.

The main trade-off is depth control. These blades do not adjust cutting depth, and you need to set a suitable depth before cutting.

Manual adjustment is needed for different materials, so test your settings on scrap media first.

THANMAO 20 PCS Replacement Cutting Blades CompatibleCheck it on Amazon
3

Likart 6-Pack Paper Cutter Replacement Blade kit: Best for Cricut trimmer paper work

Likart 6-Pack Paper Cutter Replacement Blade kit, cricut joy xtra replacement blades
9.5/10Our score
  • 4 cutting blades
  • 2 scoring blades
  • Light Green holder included
  • Compatible with Cricut Portable Trimmer
  • Compatible with Cricut Basic Trimmer
  • Compatible with Cricut Roll Holder
  • For paper, vinyl, cardstock, photo, coupon and card
  • Scoring blades for fold cards
  • Manual operation

A manual trimmer kit with 4 cutting blades, 2 scoring blades and a light green holder. It fits Cricut trimmers and roll holders for paper and cardstock, not Joy Xtra cutting heads.

See it on Amazon

Pros

  • Includes cutting and scoring blades
  • Light Green holder is included
  • Fits Cricut trimmers and roll holder

Cons

  • Made for manual trimmers, not Joy Xtra
  • Does not fit older Green Cricut Cutter
  • Holder color is light green in this pack

Likart 6-Pack Paper Cutter Replacement Blade kit: Best for Cricut trimmer paper work

The Likart 6-Pack Paper Cutter Replacement Blade kit is a manual trimmer kit, not a Joy Xtra blade kit. It fits Cricut Portable Trimmer, Basic Trimmer and Roll Holder use.

The pack includes 4 cutting blades, 2 scoring blades and a light green holder. The holder is shared and the blades are replaceable.

That mix helps paper crafters who cut cardstock and also score fold lines for cards.

The blades suit paper, vinyl, cardstock, photo, coupon and card products. Scoring blades help cards fold cleanly.

Cutting blades are described as extremely sharp, so store them with care.

Fit has one clear limit. These trimmer blades do not fit the older Green Cricut Cutter.

They fit Cricut trimmer and roll holder models listed for this kit.

Choose this kit for manual paper trimming and scoring. Skip it for Joy Xtra cutting heads, where the THANMAO blades are the fit here.

If you use a different machine brand, our best Silhouette Portrait replacement blade guide covers that separate system.

Likart 6-Pack Paper Cutter Replacement Blade kitCheck it on Amazon
4

UTNVBTR Deep Point Blade + Housing: Best for deep cuts in wider Cricut machines

UTNVBTR Deep Point Blade + Housing, cricut joy xtra replacement blades
9.4/10Our score
  • 6 deep point blades
  • Housing included
  • Compatible with Maker 3, Maker 4 and Maker
  • Compatible with Explore 3, Explore 4, Explore Air 2, Air and One
  • Compatible with Venture
  • 60 degree deep cut blade
  • German alloy manufacturing
  • Rubber sleeve safety design
  • For chipboard, rubber sheets, thick cardstock, stiffened felt, foam sheets and cardboard

Six deep point blades with a housing for Maker and Explore machines. The 60 degree deep cut shape suits thicker cardstock, chipboard, felt, foam and cardboard in those machines.

See it on Amazon

Pros

  • Housing is included
  • 6 blades in one pack
  • Deep cut shape for thicker materials

Cons

  • Made for Maker and Explore machines, not Joy Xtra
  • Not a standard Joy Xtra blade format
  • Best suited to thicker materials than vinyl

UTNVBTR Deep Point Blade + Housing: Best for deep cuts in wider Cricut machines

The UTNVBTR Deep Point Blade + Housing is a deep cut set for Maker and Explore machines. It is not made for the Joy Xtra, so it belongs in this list as a comparison pick for thicker materials.

The set includes 6 deep point blades and a housing. A housing in the box makes replacement simpler than a blade-only pack.

Each blade comes with a rubber sleeve for safer handling.

The blade shape is a 60 degree deep cut blade. UTNVBTR says it is made of high quality imported German alloy.

The casing is electroplated to prevent primer peeling, according to the brand.

The stated uses cover chipboard, rubber sheets, thick cardstock, stiffened felt, foam sheets and cardboard. Those materials sit above standard vinyl in thickness and need a deeper blade shape.

Compatibility covers Maker 3, Maker 4, Maker, Explore 3, Explore 4, Explore Air 2, Air, One and Venture. That wide list shows the intended machine family.

Choose it for deep cuts in those machines. Skip it for Joy Xtra vinyl work, where blade size and housing shape will not match.

UTNVBTR Deep Point Blade + HousingCheck it on Amazon
5

Likart 2 Pcs Knife Replacement Blades: Best for Maker knife blade projects

Likart 2 Pcs Knife Replacement Blades, cricut joy xtra replacement blades
8.8/10Our score
  • 2 knife replacement blades
  • 1 rubber changing cap included
  • Works with Maker 4, Maker 3 and Maker
  • Compatible with Cricut Knife Blade Drive Housing
  • Cuts up to 3/32 in balsa
  • Cuts up to 2 mm artificial leather
  • Cuts 4-layer pad
  • Cuts basswood up to 1/16 in
  • Alloy steel
  • Not recommended for images smaller than 3/4 in

Two knife blades with a rubber changing cap for Maker machines and Knife Blade Drive Housing. It suits balsa, basswood, artificial leather and pad materials in larger cuts.

See it on Amazon

Pros

  • 2 knife blades plus rubber changing cap
  • Fits Maker Knife Blade Drive Housing
  • Handles listed wood and leather thicknesses

Cons

  • Made for Maker machines, not Joy Xtra
  • Not recommended for images smaller than 3/4 in
  • Blade tip only, housing is not included

Likart 2 Pcs Knife Replacement Blades: Best for Maker knife blade projects

The Likart 2 Pcs Knife Replacement Blades are knife blades for Maker machines and Knife Blade Drive Housing. They are not Joy Xtra blades.

The pack includes 2 knife replacement blades and 1 rubber changing cap. The cap helps with safe blade changes.

Remove it with care, since the blade is very sharp.

Likart says the blades suit cuts up to 3/32 inch balsa, 2 mm artificial leather, 4-layer pad and basswood up to 1/16 inch. Those limits suit puzzles, models and leather products.

One limit is size. Likart does not recommend cutting images smaller than 3/4 inch with these knife blades.

That makes them better for larger shapes than for small vinyl text.

The blades are made from premium material and described as hard, sharp and durable. The material type is alloy steel.

Choose them for Maker knife projects in the listed materials. Skip them for Joy Xtra standard vinyl cuts.

For material pairings on Joy Xtra, see our best Cricut Joy Xtra iron on vinyl guide.

Likart 2 Pcs Knife Replacement BladesCheck it on Amazon

Best Cricut Joy Xtra replacement blades at a glance

The THANMAO pack is the only pick here made directly for Joy and Joy Xtra machines. The Cricut and Likart knife blades are for Maker machines.

The UTNVBTR set is for Maker and Explore deep cuts. The Likart 6-pack is for manual Cricut trimmers.

ProductBest forBlade lengthCompatible devicesNumber of itemsOur score
Cricut Replacement Knife Bladethick Maker cuts12 mmCricut Maker19.7
THANMAO 20 PCS Replacement Cutting Blades CompatibleJoy Xtra vinyl workJoy and Joy Xtra machines209.6
Likart 6-Pack Paper Cutter Replacement Blade kitCricut trimmer paper workCricut Trimmer 12 in, Cricut Trimmer 13 in, Cricut Roller Holder9.5
UTNVBTR Deep Point Blade + Housingdeep cuts in wider Cricut machinesMaker 3, Maker 4, Maker, Explore 3, Explore 4, Explore Air 2, Air, One, Venture9.4
Likart 2 Pcs Knife Replacement BladesMaker knife blade projectsMaker 4, Maker 3, Maker8.8

How we compared these blades

Our score weighs specs, features and buyer feedback against what you're shopping for. For this search, machine fit carried the most weight.

A Maker knife blade can score well for thick materials, yet it still cannot replace a Joy Xtra standard blade.

We checked the stated compatible devices for each pack. We checked blade count, included parts, material types and stated thickness limits.

We also noted whether a housing, holder or changing cap was included.

We did not test these blades by hand. Claims about sharpness, durability and material range come from the brands and the product data.

Use the stated limits as your guide, and confirm fit for your exact machine before you order.

Do Cricut Joy Xtra blades fit older Cricut machines?

Standard Joy Xtra blades are made for the Joy system, not for Maker knife housings. The THANMAO blades in this group state Joy and Joy Xtra fit.

Maker knife blades state Maker fit instead.

Maker knife blades

Maker knife blades cut thicker materials such as balsa wood, basswood, leather, chipboard and craft foam. They need a Knife Blade Drive Housing in a Maker machine.

That housing shape is different from the Joy Xtra blade setup.

Deep point blades

Deep point blades suit thicker cardstock, chipboard, felt, foam and cardboard in Maker and Explore machines. The UTNVBTR set includes a housing for those machines.

A deep point blade is not a direct Joy Xtra standard blade substitute.

Trimmer blades

Trimmer blades are manual blades for paper cutters and roll holders. The Likart 6-pack includes cutting and scoring blades for that use.

Manual trimmer blades do not fit a Joy Xtra cutting head.

How do Cricut Joy Xtra replacement blades work for vinyl?

A standard Joy Xtra blade cuts vinyl, fabric and labels within its stated thickness range. The THANMAO blades suit media up to 0.25 mm thick.

That range covers common vinyl projects such as decals, banners, labels and wall art.

Blade depth

The THANMAO blades do not adjust cutting depth. Set a suitable depth before cutting.

Adjust the depth by hand for different materials, and test on scrap media first.

Blade care

Keep blade tips in the plastic case when you are not cutting. The rubber covers protect your fingers and the tips during storage.

Replace a blade when cuts drag, tear or leave rough edges.

Project fit

Labels, cards, banners, decals and wall art all sit inside the stated use range. Tote, mug and party decor projects also fit when the media stays at or below 0.25 mm.

For media choices, read our best Cricut Joy Xtra iron on vinyl picks.

Which count is best: single blades or multi-packs?

A single blade suits a light user who cuts once in a while. A multi-pack suits frequent cutting and lets you swap in a fresh blade without delay.

The THANMAO pack holds 20 blades, which is the largest count in this group.

Small packs

The Cricut Replacement Knife Blade pack holds 1 blade. The Likart knife pack holds 2 blades plus a rubber changing cap.

Small packs make sense when you use the blade type for a specific project.

Mid-size packs

The UTNVBTR set holds 6 deep point blades plus a housing. The Likart trimmer kit holds 6 blades total, split between cutting and scoring types.

Mid-size packs balance cost per blade with storage space.

Large packs

The THANMAO pack holds 20 standard blades for Joy and Joy Xtra. That count fits people who cut vinyl every week.

Store the case where tips stay protected from scratches.

What materials can each blade type cut?

Standard blades handle vinyl, fabric, labels and paper within a thin range. The THANMAO blades state a limit of 0.25 mm.

That limit keeps them in standard craft media, not thick wood or leather.

Thick materials

Maker knife blades handle balsa wood, basswood, leather, chipboard, matboard and craft foam within stated limits. The Cricut knife blade lists balsa up to 3/32 inches and basswood up to 1/16 inches.

The Likart knife blades list similar limits.

Deep cut materials

Deep point blades handle chipboard, rubber sheets, thick cardstock, stiffened felt, foam sheets and cardboard. The UTNVBTR set targets those thicker materials in Maker and Explore machines.

Paper materials

Trimmer cutting blades handle paper, cardstock, photos, coupons and cards. Scoring blades create fold lines for cards.

The Likart 6-pack covers both jobs in one kit.

How do you change a Cricut Joy Xtra blade safely?

Safe blade changes start with the rubber cover. THANMAO blades come wrapped in a rubber cover to protect your fingers.

Pull the cover off during use, and keep the plastic case for storage.

Before you cut

Set a suitable depth before cutting, since these blades do not adjust depth on their own. Adjust by hand for each material type.

Run a small test cut on scrap media to check depth and shape.

During the cut

Watch for dragging, tearing or incomplete cuts. Those signs can mean the blade is dull, the depth is wrong, or the media is too thick.

Stop and check the media thickness against the 0.25 mm limit.

After the cut

Return unused blades to the plastic case. Keep the case closed so tips do not get scratched.

Store spare blades where they will not roll or drop.

Should you buy a bundle with your replacement blades?

A bundle can help when you need a machine, tools and materials together. Our best Cricut Joy Xtra bundle guide covers machine and accessory sets.

Our best Cricut Joy Xtra accessories guide covers add-on tools for the same machine.

Pens and tools

Pens add writing and drawing to a cutting machine. Our best Cricut Joy Xtra pens guide covers pen options for the Joy Xtra.

A blade change and a pen change are separate tasks, so match the tool to the job.

Machine choice

If you have not bought a machine yet, compare the Joy and Joy Xtra first. Our Cricut Joy Xtra vs Joy guide breaks down the size and feature differences.

Blade fit follows the machine you choose.

The verdict on the best Cricut Joy Xtra replacement blades

Pick the THANMAO 20 PCS Replacement Cutting Blades Compatible for Joy Xtra vinyl, fabric, labels, cards, banners and decals. Their Joy and Joy Xtra fit and 20-blade count make them the direct pick for this search.

Pick the Cricut Replacement Knife Blade or the Likart 2 Pcs Knife Replacement Blades for Maker knife projects in wood, leather, chipboard and craft foam. Pick the UTNVBTR set for deep cuts in Maker and Explore machines.

Pick the Likart 6-pack for manual Cricut trimmer cutting and scoring.

For your next step, read how to use Cricut Joy Xtra before you install a fresh blade. That guide walks through setup so your first cut after a change starts on solid ground.

Our top 3 picks at a glance

  1. 1 Cricut Replacement Knife Blade
    Best for thick Maker cuts

    Cricut Replacement Knife Blade

    9.7/10 our score

    See it on Amazon
  2. 2 THANMAO 20 PCS Replacement Cutting Blades Compatible
    Best for Joy Xtra vinyl work

    THANMAO 20 PCS Replacement Cutting Blades Compatible

    9.6/10 our score

    See it on Amazon
  3. 3 Likart 6-Pack Paper Cutter Replacement Blade kit
    Best for Cricut trimmer paper work

    Likart 6-Pack Paper Cutter Replacement Blade kit

    9.5/10 our score

    See it on Amazon

Frequently asked questions

Do Cricut Maker knife blades fit the Joy Xtra?

No. The Cricut Replacement Knife Blade and the Likart 2 Pcs Knife Replacement Blades are made for Cricut Maker machines.

The Joy Xtra uses a different blade system, so match the blade to your machine before you buy.

Which blade here fits the Joy Xtra directly?

The THANMAO 20 PCS Replacement Cutting Blades Compatible are made for Joy and Joy Xtra machines. The other picks cover Maker knife cuts, deep point cuts, or manual trimmer work.

How thick can the THANMAO blades cut?

THANMAO says the blades suit media up to 0.25 mm thick. That range fits standard vinyl and fabric projects, labels, cards, banners and decals.

Do these blades adjust their own cutting depth?

The THANMAO blades do not adjust cutting depth. You need to set a suitable depth before cutting and adjust manually for different materials.