Review

xTool P3 Laser Review: Worth It? (November 2026)

Updated on · By the Handyloom team

The xTool P3 is worth considering if you need a larger enclosed CO2 machine and will use its expanded work area and workflow features. Compare its footprint, ventilation needs and total setup with a smaller machine before choosing.

xTool RA3 World's First Smart MagSwap Rotary, xTool P3 enclosed CO2 laser machine

In this review

xTool RA3 World's First Smart MagSwap Rotary

Best for rotary work on the P39.5/10

See it on Amazon
On this page (6 sections)
  1. Is the xTool P3 a good fit for your workshop?
  2. What should you compare before buying the xTool P3?
  3. xTool P3 alternatives and accessories
  4. How does the xTool P3 compare with other xTool CO2 machines?
  5. What ventilation plan does the xTool P3 need?
  6. Is the xTool P3 worth considering?

The xTool P3 is worth considering if you want a larger enclosed CO2 laser for bigger projects and a more capable workshop setup. Its fit depends on available space, exhaust planning and whether its features solve needs that a smaller machine cannot.

This review compares the P3 buyer case with three related products: the RA3 rotary attachment for P3 owners, the S1 as a diode alternative, and a purifier that is specifically not supported with the P3. We checked the stated features and limits; we did not test these machines in person.

Is the xTool P3 a good fit for your workshop?

The xTool P3 makes the most sense when larger enclosed CO2 capability is a real need, not a feature you might use someday. Decide based on your usual material size, workspace and exhaust plan before comparing accessories.

A larger machine can open up more room for projects, but it also asks more from the room around it. Measure the footprint and the route into your workspace, and plan space for loading, maintenance and ventilation.

If you're moving up from a smaller xTool, review how to use the xTool P2 to understand the kind of setup and workflow involved with an enclosed CO2 machine. The P3 decision should then come down to whether its larger format and features justify the additional space and setup.

What should you compare before buying the xTool P3?

Compare work area, project types, ventilation and setup requirements before you decide. A larger enclosed CO2 machine is useful only when it fits both the work and the room.

Start with your largest common project, not an unusual one. If most work uses small blanks, the P3's larger format may go unused; if you regularly need more room, a smaller bed could slow down your process.

For golf-club personalization, compare laser engravers for golf clubs.

Also consider materials and machine type. CO2 and diode machines differ in their applications, so check the material guidance and machine capabilities for the jobs you plan to run.

Our overview of how a laser engraver works covers the basic process and helps frame that comparison.

Before ordering, confirm the installation requirements and exhaust plan with xTool. This matters especially for purifier compatibility, since the P3's 238 m³/h fume extraction rules out the AP2.

xTool P3 alternatives and accessories

The right comparison depends on whether you need a CO2 machine, a rotary attachment or a compatible smoke solution. These three products answer different buyer questions, so their scores reflect their fit for those specific needs.

Our score weighs stated specs and features against the needs of someone considering a larger enclosed CO2 machine.

xTool RA3 World's First Smart MagSwap Rotary

The RA3 is the directly relevant accessory for P3 buyers who engrave rounded objects. It includes chuck, roller, sphere and ring attachments, with magnetic swaps designed to reduce setup steps.

1

xTool RA3 World's First Smart MagSwap Rotary: Best for rotary work on the P3

xTool RA3 World's First Smart MagSwap Rotary, xTool P3 enclosed CO2 laser machine
9.5/10Our score
  • 360° LiDAR mapping
  • Chuck, roller, sphere and ring attachments
  • 130 mm chuck

A P3 exclusive rotary attachment for engraving rounded objects, with magnetic attachment swaps and 360° LiDAR mapping. Consider it if rotary work is central to your projects.

See it on Amazon

Pros

  • Four interchangeable attachments
  • 3D preview and automatic mode recognition
  • Supports full-wrap engraving on rounded objects

Cons

  • Exclusive to the P3, F2 Ultra, F1 Ultra and F2
  • Batch processing kits are separate purchases

Its 360° LiDAR mapping supports object modeling and a 3D preview, while automatic mode recognition helps match the selected attachment to the setup. The 130 mm chuck is intended for larger items, and the one-step inner-ring angle adjustment is aimed at ring and tapered-object work.

The RA3 is exclusive to the P3, F2 Ultra, F1 Ultra and F2. Batch processing kits are separate purchases, so account for those if multiple matching items per run are part of your plan.

xTool S1 40W Laser Cutter and Laser

The S1 is an enclosed diode alternative for buyers whose projects fit its stated 23.93 x 15.16 in bed. It gives you a comparison point if you're weighing the P3 against a different machine type and work area.

2

xTool S1 40W Laser Cutter and Laser: Best for a diode alternative

xTool S1 40W Laser Cutter and Laser, xTool P3 enclosed CO2 laser machine
9.5/10Our score
  • 40W diode laser
  • 23.93 x 15.16 in bed
  • Enclosed design

A 40W enclosed diode alternative with a stated 23.93 x 15.16 in bed. Compare it with the P3 if your projects fit a smaller machine and you want to consider a different laser type.

See it on Amazon

Pros

  • Enclosed design with lid-open stop
  • Auto-focus and xTool Creative Space
  • Bed size is stated

Cons

  • Diode machine, not a CO2 alternative with the same laser type
  • Rotary bundle configuration may not suit every project

The S1's stated features include auto-focus, xTool Creative Space, a lid-open stop and five flame sensors. Its 40W diode laser and 600 mm/s engraving speed are stated product features, but don't treat those figures as a direct measure of how it will compare with the P3 on your particular materials or jobs.

Check the exact machine configuration and bed dimensions before choosing. The named item is a rotary bundle, so confirm the included components match your intended projects.

xTool SafetyPro AP2 Smoke Purifier for Laser

The AP2 is not compatible with the P3, so it should not be part of a P3 setup plan. The P3's 238 m³/h fume extraction exceeds the AP2's stated support limit of 150 m³/h or less.

3

xTool SafetyPro AP2 Smoke Purifier for Laser: Best for compatible exhaust setups

xTool SafetyPro AP2 Smoke Purifier for Laser, xTool P3 enclosed CO2 laser machine
9.3/10Our score
  • Six-layer filtration
  • 36 cyclones
  • Not supported with the P3

A smoke purifier for compatible laser setups, but it does not support the P3 because the P3's fume extraction is 238 m³/h. Do not plan to pair this purifier with the P3.

See it on Amazon

Pros

  • Six-layer filtration system
  • Cyclone stage captures large particles
  • Magnetic pull-out filter door

Cons

  • Not supported with the xTool P3
  • Confirm exhaust requirements for other machines

For other compatible machines, the AP2 has a six-layer filtration system and 36 cyclones that capture large particles before they reach the filters. Its stated features include a magnetic pull-out filter door and automatic syncing with some xTool machines.

Compatibility varies by machine and mode. Confirm the exhaust requirements and operating instructions for your specific laser before choosing a purifier.

How does the xTool P3 compare with other xTool CO2 machines?

Compare the P3 with other xTool CO2 models by usable work area, project workflow and setup needs. A family-level comparison is more useful than choosing by model name alone.

For an earlier desktop format, compare the xTool D1 Pro and D1 Pro 2.0.

If you're still deciding which size or configuration fits, use our guide to the best xTool CO2 laser engraver. Match the options against your common materials, project dimensions, available room and exhaust path.

Consider what would make an upgrade worthwhile. More capacity can help with larger work, but it won't improve a workflow that mainly involves small pieces or occasional jobs.

Identify the bottleneck in your current setup before paying for a larger format.

What ventilation plan does the xTool P3 need?

Plan the P3 exhaust setup around the machine's stated 238 m³/h fume extraction. The SafetyPro AP2 does not support the P3, so choose a different solution confirmed for that requirement.

Smoke management is part of machine placement, not a last-minute accessory choice. Work out where exhaust can go, how the duct will route and whether the room layout allows safe, practical operation.

Follow xTool's installation and safety instructions for the machine and any exhaust equipment. Do not assume that a purifier compatible with another xTool model will also work with the P3.

Is the xTool P3 worth considering?

The P3 is worth considering if your projects need a larger enclosed CO2 machine and you can plan for its space and exhaust requirements. If your work fits a smaller machine or you prefer a diode option, compare the S1 before committing.

Choose the P3 when its larger format addresses a regular project need. Consider the RA3 if rounded-object engraving matters, and select a P3-compatible exhaust solution rather than the AP2.

Frequently asked questions

Is the xTool P3 a CO2 laser?

The P3 is an enclosed CO2 laser machine aimed at buyers who need a larger format. Before choosing it, compare the machine's work area, placement needs and exhaust setup with your projects and workshop.

The laser type alone doesn't determine whether its size and workflow suit your use.

Is the xTool P3 a good choice for a small workshop?

It may suit a small workshop if you have room for the machine and its ventilation setup, but measure the full installation area first. Include access for loading materials, maintenance and exhaust routing.

If space is tight or your projects are modest, compare a smaller option such as the xTool S1.

Does the xTool SafetyPro AP2 work with the P3?

No. The AP2 does not support the P3 because the P3's fume extraction is 238 m³/h, while the AP2 is intended for setups with extraction of 150 m³/h or less.

Choose a compatible exhaust solution for the P3 rather than planning around the AP2.

What rotary attachment works with the xTool P3?

The xTool RA3 is a P3 exclusive rotary attachment. It includes chuck, roller, sphere and ring attachments, with 360° LiDAR mapping and a 3D preview.

Check that the attachment suits your object shapes and workflow, especially if you need batch processing, which requires separate kits.