Best picks

8 Best Wood and MDF Sublimation Coaster Blanks (November 2026)

Updated on · By the Handyloom team

The best blank sublimation MDF coaster blanks include the LaiHiulaan 36pcs Sublimation Square Coaster Blanks Bulk for balanced square coaster projects, the Guiqulai 60 Pcs Sublimation Coasters Blanks for larger square batches, and the AiDiYGECO 64Pcs Sublimation Car Coasters Blanks for car cup-holder projects.

On this page (6 sections)
  1. How we chose the best blank sublimation MDF coaster
  2. Best wood and MDF sublimation coaster blanks
  3. What size MDF coaster blank should you choose?
  4. How do you prepare a blank sublimation MDF coaster?
  5. What should you check before buying MDF sublimation coasters?
  6. Which blank sublimation MDF coaster is best for you?

The best blank sublimation MDF coaster for most projects is the LaiHiulaan 36-piece square set. It combines a useful 3.86-inch format, cork backing, 4 mm thickness and a 36-piece count for gifts, home use and client orders.

That balance makes it a good starting point for many makers. A 3.86-inch square gives artwork room for a name, photo, logo or simple pattern without feeling oversized on a table.

The 4 mm thickness feels steady in daily use and should help the finished coaster sit flat under a mug or glass. Cork backing adds a softer layer against the table, which helps protect wood surfaces from heat, moisture and light scratches.

The 36-piece count suits different kinds of work. You can make a matching set for your home, prepare gifts for family or friends, or fill a small client order without ordering the largest batch size.

Your best choice still changes with the project. Guiqulai gives you more standard square blanks, AiDiYGECO is sized for car cup holders, and DV DESIGN removes the need to peel a top layer before pressing.

Shape matters as much as count when you plan a design. Square blanks suit rectangular photos and corner patterns, while round blanks suit centered logos, monograms and circular borders.

For printer setup, start with this guide to the sublimation printer machine. If you are still comparing blank materials, read how to choose sublimation coaster blanks.

Before you press a full batch, check the film, backing material and care instruction. A small test run can show whether your paper, ink, temperature and time settings suit the coated surface.

In short, LaiHiulaan is the easiest starting point for a standard square project. Other sets are better when you need more blanks, a car size, a round format or less preparation before pressing.

Our picks at a glance

  1. 1 LaiHiulaan 36pcs Sublimation Square Coaster Blanks Bulk
    Best for balanced square coaster projects

    LaiHiulaan 36pcs Sublimation Square Coaster Blanks Bulk

    9.7/10 our score

    See it on Amazon
  2. 2 Guiqulai 60 Pcs Sublimation Coasters Blanks
    Best for larger square batches

    Guiqulai 60 Pcs Sublimation Coasters Blanks

    9.6/10 our score

    See it on Amazon
  3. 3 AiDiYGECO 64Pcs Sublimation Car Coasters Blanks
    Best for car cup-holder projects

    AiDiYGECO 64Pcs Sublimation Car Coasters Blanks

    9.4/10 our score

    See it on Amazon
  1. 4DV DESIGN 50 x Coaster Set MDF Blank

    DV DESIGN 50 x Coaster Set MDF Blank

    Best for fast round production
    Check it
  2. 5Jippedea Sublimation Blanks Drink Coasters

    Jippedea Sublimation Blanks Drink Coasters

    Best for small round gift sets
    Check it
  3. 6MR.R 10 Pieces Sublimation Blanks Round Cup

    MR.R 10 Pieces Sublimation Blanks Round Cup

    Best for testing a small design run
    Check it
  4. 7Ziliny Sublimation Coasters Blanks Ceramic MDF Wood

    Ziliny Sublimation Coasters Blanks Ceramic MDF Wood

    Best for 4-inch square gift coasters
    Check it
  5. 8KUKLIPJIM 30 Pcs 4 Inch Round MDF

    KUKLIPJIM 30 Pcs 4 Inch Round MDF

    Best for round 4-inch designs
    Check it

How we chose the best blank sublimation MDF coaster

The strongest picks have a clear use, a stated size, a defined material and a quantity that matches the project. For another substrate, compare sublimation metal sign blanks.

We compared MDF and engineered-wood coaster blanks by shape, coating details, cork backing, thickness and batch size.

Our score weighs specs, features and buyer feedback against what you’re shopping for. We did not treat a larger count as automatically better because a small design run may need only 10 or 20 blanks.

If your setup uses an Epson F170, see how to replace its maintenance box.

The most important split is between standard drink coasters and car coasters. A 2.75-inch round blank can fit a cup holder, but it gives you less print area than a 3.9-inch square or 4-inch round coaster.

ProductBest forCountSizeMaterialOur score
LaiHiulaan 36pcs Sublimation Square Coaster Blanks Bulkbalanced square coaster projects36 pieces3.86 x 3.86 inEngineered wood with cork back9.7
Guiqulai 60 Pcs Sublimation Coasters Blankslarger square batches60 pieces3.9 x 3.9 inEngineered wood with cork back9.6
AiDiYGECO 64Pcs Sublimation Car Coasters Blankscar cup-holder projects64 pieces2.75 in diameterMDF with cork back9.4
DV DESIGN 50 x Coaster Set MDF Blankfast round production50 pieces9 x 9 cm9.1
Jippedea Sublimation Blanks Drink Coasterssmall round gift sets20 pieces3.5 in diameterEngineered wood8.9
MR.R 10 Pieces Sublimation Blanks Round Cuptesting a small design run10 piecesAbout 3.94 x 3.9 inEngineered wood, wood and neoprene8.7
Ziliny Sublimation Coasters Blanks Ceramic MDF Wood4-inch square gift coasters24 piecesAbout 4 x 4 inCork and MDF8.4
KUKLIPJIM 30 Pcs 4 Inch Round MDFround 4-inch designs30 pieces4 inMDF with cork backing8.2

Best wood and MDF sublimation coaster blanks

LaiHiulaan leads this group because it balances quantity, size, backing and preparation details. The other options move up or down based on batch size, shape and how much setup work you want before pressing.

1

LaiHiulaan 36pcs Sublimation Square Coaster Blanks Bulk: Best for balanced square coaster projects

LaiHiulaan 36pcs Sublimation Square Coaster Blanks Bulk, blank sublimation MDF coaster blanks
9.7/10Our score
  • 36 MDF wood coasters
  • 3.86 x 3.86 in square shape
  • 4 mm thickness
  • Cork backing
  • Protective film on the white side

A practical square set for personalized gifts, home use and client orders. The 36-piece count gives you room for repeated designs without taking on the largest pack here.

See it on Amazon

Pros

  • Cork backing
  • Clear coated printing surface
  • Useful 36-piece quantity

Cons

  • White-side protective film must be removed before pressing

LaiHiulaan is the best all-around choice for a standard square coaster project. Its 36 MDF blanks measure 3.86 x 3.86 inches, with a 4 mm thickness and cork backing.

That size gives you a nearly 4-inch square canvas for names, photos, logos and simple patterns. The pack is large enough for several matching sets without committing to the 60-piece Guiqulai quantity.

The white side has a protective film. Remove it before printing, then use heat transfer tape to keep the design in place during pressing.

For printer-side supplies, see refillable Sawgrass SG500 ink cartridges. For printer maintenance, see how to replace the Sawgrass waste collection unit.

The stated pressing guide is about 355–375°F for 60–70 seconds. Follow your transfer paper and heat-press instructions as the final reference, since paper, ink and press conditions can change the result.

Choose LaiHiulaan when you want a balanced square blank for gifts or client orders. Its dry-clean-only care instruction means finished coasters should not be treated like dishwasher-safe tableware.

LaiHiulaan 36pcs Sublimation Square Coaster Blanks BulkCheck it on Amazon
2

Guiqulai 60 Pcs Sublimation Coasters Blanks: Best for larger square batches

Guiqulai 60 Pcs Sublimation Coasters Blanks, blank sublimation MDF coaster blanks
9.6/10Our score
  • 60 MDF cork-backed coasters
  • About 3.9 x 3.9 in
  • 0.16 in thickness
  • Square shape
  • Protective film on the printing side

The largest standard square pack in this group suits repeated gift sets, event favors and a growing order queue. Its size is close to the LaiHiulaan set.

See it on Amazon

Pros

  • Highest square-coaster count
  • Cork backing
  • Waterproof construction claim

Cons

  • Hand-wash care instructions

Guiqulai is the better fit when you need a larger batch of standard square coasters. The pack contains 60 MDF blanks measuring about 3.9 x 3.9 inches and 0.16 inches thick.

The dimensions are close to LaiHiulaan, so artwork made for one can usually be planned around a similar square workspace. The main difference is the higher count, which helps with event favors, repeated gifts or a steady order queue.

Each coaster has a cork back and a protective film on the printing side. Peel the film, attach the design with heat transfer tape and use sublimation paper for the transfer process.

The stated heat guide is 355–375°F for 60–70 seconds. Guiqulai gives hand-wash care instructions, so clean finished coasters gently instead of putting them through a dishwasher.

Pick Guiqulai when quantity matters most among the standard square options. Its 60-piece count can leave more unused blanks if you are only making a single small set.

Guiqulai 60 Pcs Sublimation Coasters BlanksCheck it on Amazon
3

AiDiYGECO 64Pcs Sublimation Car Coasters Blanks: Best for car cup-holder projects

AiDiYGECO 64Pcs Sublimation Car Coasters Blanks, blank sublimation MDF coaster blanks
9.4/10Our score
  • 64 MDF car coasters
  • 2.75 in round diameter
  • 0.15 in thickness
  • Cork backing
  • Protective film on the white surface

These smaller round blanks are made for personalized car-coaster projects rather than standard drink coasters. The 64-piece pack works well for many small gifts or orders.

See it on Amazon

Pros

  • Largest count in this roundup
  • Car-coaster size
  • Cork backing

Cons

  • Smaller print area than the square blanks

AiDiYGECO is designed for personalized car-coaster projects. Its 64 MDF blanks are round, 2.75 inches in diameter and 0.15 inches thick, with cork backing.

The smaller diameter is the main trade-off. You get less artwork space than a standard drink coaster, but the size fits a cup holder where wider blanks would not.

The slim thickness helps in tighter holders and keeps the finished piece light. Simple centered art suits it better than dense detail.

Remove the protective film from the white surface before printing. Keep important text away from the outer edge and leave a clear margin, since part of the coaster may be hidden by the holder.

A circular layout works best for short names, initials, small photos or a simple logo. The 64-piece count suits many small gifts or branded orders, and leaves room to replace a worn piece.

Care is listed as dry clean only, so wipe finished coasters gently and avoid soaking. Choose this set when the final use is a car cup holder.

For table settings, compare it with the larger best sublimation car coaster blanks and standard square options above.

AiDiYGECO 64Pcs Sublimation Car Coasters BlanksCheck it on Amazon
4

DV DESIGN 50 x Coaster Set MDF Blank: Best for fast round production

DV DESIGN 50 x Coaster Set MDF Blank, blank sublimation MDF coaster blanks
9.1/10Our score
  • 50 round MDF coasters
  • 9 x 9 cm size
  • 3 mm MDF with 1 mm cork
  • Glossy sublimation layer
  • No top layer to peel before pressing

The pre-finished glossy top removes one preparation step before pressing. Its 50-piece round set fits makers who want a larger batch with a simple setup.

See it on Amazon

Pros

  • 50-piece batch
  • Glossy sublimation layer
  • No top layer to peel

Cons

  • Round shape limits rectangular artwork

DV DESIGN suits makers who want a round batch with a ready-to-press glossy top. The set includes 50 round MDF coasters, each measuring 9 x 9 cm.

Its construction is stated as 3 mm MDF, 1 mm cork and a glossy sublimation layer. The product description also says there is no top layer to peel before pressing, which removes a preparation step found on several other picks.

The round shape works well for centered names, logos, monograms and circular artwork. It is less convenient for wide rectangular designs that need the full corners of a square blank.

DV DESIGN gives a pressing guide of more than 50 seconds at above 200°C on flat heat press machines. Match that guide with your transfer paper instructions before making a full batch.

Choose it when quick preparation and a 50-piece round set matter more than a square print area. Its stated hand-wash care also calls for gentle cleaning after the coasters are finished.

DV DESIGN 50 x Coaster Set MDF BlankCheck it on Amazon
5

Jippedea Sublimation Blanks Drink Coasters: Best for small round gift sets

Jippedea Sublimation Blanks Drink Coasters, blank sublimation MDF coaster blanks
8.9/10Our score
  • 20 MDF round coasters
  • 3.5 in diameter
  • 0.16 in thickness
  • White sublimation surface
  • Protective film on the white side

A smaller pack keeps the starting quantity manageable for samples, home projects and limited gift sets. The 3.5-inch round shape gives a familiar drink-coaster format.

See it on Amazon

Pros

  • Manageable 20-piece count
  • Round drink-coaster format
  • MDF construction

Cons

  • Fewer blanks than the bulk sets

Jippedea is a sensible choice for a smaller round gift set. It includes 20 MDF coasters measuring 3.5 inches across and 0.16 inches thick.

The 20-piece quantity gives you enough blanks for a few coordinated sets without buying a large bulk pack. It also gives you room to make samples before offering a design to customers.

That middle quantity can suit a first custom order or a holiday gift run. You can make several matching pieces for family, test a design on one blank, and still have blanks left for a second version.

The 3.5-inch round format is familiar for drinks. It fits mugs and glasses on kitchen counters, living room tables, office desks, coffee shop tables and home bar areas.

The white side has a protective film that should be removed before sublimation. The stated heat guide is 356–374°F for 60–70 seconds.

Plan the artwork inside the circular edge so names and logos remain easy to read. Centered designs, round borders and short text tend to work better than wide layouts that reach toward the corners.

MDF gives the blank a light, rigid feel that is easy to position on a press. The 0.16-inch thickness also helps the finished coaster feel like a proper drink coaster rather than a thin card.

Finished coasters are listed for hand washing, so gentle cleaning is the safer routine. Wipe them clean rather than soaking them, and let them dry fully before stacking.

Pick Jippedea when you need a moderate round batch for home projects or promotional artwork. Choose MR.R instead if you want only 10 blanks for a first trial.

Jippedea Sublimation Blanks Drink CoastersCheck it on Amazon
6

MR.R 10 Pieces Sublimation Blanks Round Cup: Best for testing a small design run

MR.R 10 Pieces Sublimation Blanks Round Cup, blank sublimation MDF coaster blanks
8.7/10Our score
  • 10 MDF round coasters
  • 3.94 x 3.9 in size
  • 3 mm thickness
  • White printable side
  • Protective film

The 10-piece pack limits leftover blanks when you are trying a new artwork or preparing a small set. It has a larger round format than the Jippedea coasters.

See it on Amazon

Pros

  • Smallest project quantity
  • Large round print area
  • Absorbent design claim

Cons

  • Only 10 pieces per pack

MR.R is the smallest batch in this roundup, with 10 round MDF coasters measuring about 3.94 x 3.9 inches and 3 mm thick.

That quantity is useful for a small gift set, a sample run or a new design that you do not want to produce in bulk. The larger round format still gives the artwork more room than the 2.75-inch car blanks.

The printable side has a protective film, and the care information says to hand wash the finished coasters. MR.R gives a pressing guide of about 356°F for 80 seconds for one stated paper setup.

The product information also describes the coasters as absorbent. Treat that as a feature of the design, while keeping the finished pieces away from harsh cleaning methods.

Choose MR.R when low quantity matters more than bulk value. It is not the best fit for event orders because the 10-piece pack requires more repeat purchases.

MR.R 10 Pieces Sublimation Blanks Round CupCheck it on Amazon
7

Ziliny Sublimation Coasters Blanks Ceramic MDF Wood: Best for 4-inch square gift coasters

Ziliny Sublimation Coasters Blanks Ceramic MDF Wood, blank sublimation MDF coaster blanks
8.4/10Our score
  • 24 MDF and cork coasters
  • About 4 x 4 in
  • 0.16 in thickness
  • Cork backing
  • Protective film on the surface

The near-4-inch square format gives artwork a little more room than the smaller square options. The 24-piece count suits a medium-size gift project.

See it on Amazon

Pros

  • Large square format
  • Cork backing
  • 24-piece pack

Cons

  • The title includes ceramic, but the stated material is cork and MDF

Ziliny gives you a larger square surface for artwork. Its 24 cork-and-MDF coasters measure about 4 x 4 inches and 0.16 inches thick.

The 4-inch format is useful for photos, larger names and gift designs that need more room than a 3.5-inch round coaster. The cork backing adds a soft layer between the MDF and the table.

Remove the protective film before transferring an image. Ziliny also warns that sublimation requires hot transfer paper, while cold transfer paper is used differently and can melt during heating.

The 24-piece pack sits between the small MR.R and Jippedea quantities and the bulk LaiHiulaan, Guiqulai and AiDiYGECO packs. That makes it a reasonable middle option for a medium gift project.

Choose Ziliny when a near-4-inch square canvas matters. The title includes ceramic, but the stated material is cork and MDF, so do not choose it expecting ceramic blanks.

Ziliny Sublimation Coasters Blanks Ceramic MDF WoodCheck it on Amazon
8

KUKLIPJIM 30 Pcs 4 Inch Round MDF: Best for round 4-inch designs

KUKLIPJIM 30 Pcs 4 Inch Round MDF, blank sublimation MDF coaster blanks
8.2/10Our score
  • 30 MDF round coasters
  • 4-inch model size
  • Non-slip cork backing
  • Water-resistant MDF claim
  • White sublimation surface

This set combines a large round format with a middle-size batch. It fits makers who want more artwork space than a 3.5-inch coaster without ordering 50 or 60 pieces.

See it on Amazon

Pros

  • 4-inch round format
  • 30-piece count
  • Cork backing

Cons

  • Round format needs a circular artwork layout

KUKLIPJIM is the best match for a large round design with a middle-size batch. It includes 30 MDF coasters in a 4-inch round format, with non-slip cork backing.

The 4-inch size gives you more room than the Jippedea 3.5-inch coasters while keeping the artwork circular. Use centered designs, round borders or text arranged around a logo.

That extra space can help with photos, travel scenes, initials or a logo with a short line of text below it. You can place the main image in the center and keep supporting details inside the round edge.

The non-slip cork backing is useful on a table because it adds grip under the coaster. It also gives the finished piece a softer underside than bare MDF.

KUKLIPJIM gives a pressing guide of 355–375°F for 45–60 seconds. Remove the protective film from the white surface before transferring the design.

Keep the blank flat and centered during setup, and secure the paper so it does not shift under pressure. A test piece is wise if you are changing paper, ink or press settings.

The stated features include water-resistant MDF and a non-slip cork back. Finished coasters are still best cared for according to the hand-wash instruction.

The 30-piece count sits between small trial packs and bulk sets of 50 or 60. That makes it a practical choice for a set of gifts, a small event or a growing shop order.

Choose this set when you want 30 large round blanks. If you need a square layout, LaiHiulaan, Guiqulai or Ziliny will give your artwork corners instead.

KUKLIPJIM 30 Pcs 4 Inch Round MDFCheck it on Amazon

What size MDF coaster blank should you choose?

Choose a 3.9–4-inch blank for standard drink coasters, a 3.5-inch blank for smaller round sets, or a 2.75-inch blank when the project is made for a car cup holder.

Square blanks make it easier to place full-bleed artwork, corner patterns and rectangular photos. Round blanks suit centered graphics, circular logos and names arranged around a central image.

Measure the design area in your software before printing. Leave a small visual margin so important text does not run into the edge or become difficult to read after pressing.

For a broader comparison of wood shapes and uses, see Best Wood Coaster Blanks For Laser. Laser blanks and sublimation blanks are not interchangeable unless the surface is made for the transfer method you plan to use.

How do you prepare a blank sublimation MDF coaster?

Start by removing the protective film from the white printing surface. Then mirror the design, place it face down, secure it with heat-resistant tape and follow the temperature and time guidance for your paper and press.

Peel the film cleanly and avoid fingerprints or residue on the coated side. Pressing through the film can spoil the transfer.

Keep the coaster flat during setup. Align square blanks with the paper edges and center round blanks before taping.

Use a clean, dry work surface and handle the blank by its edges. Oils from your hands can interfere with the transfer.

Press the paper down firmly with tape at the edges, especially on round blanks where the paper can lift. Even contact between paper and coating matters during the press cycle.

Make a small test run if you are changing paper, ink, temperature or press time. A single test piece shows whether colors are clear, pale or too dark before you press a full batch.

Note the result and adjust one setting at a time. Changing everything at once makes it harder to know what helped.

Guidance varies across this group. LaiHiulaan, Guiqulai, Jippedea and KUKLIPJIM state ranges around 355 to 375°F, while MR.R and DV DESIGN give different time or temperature directions.

Do not assume one setting fits every blank, since coating and thickness can respond differently.

For square blanks, check that the paper covers the print area without excess overhang. For round blanks, arrange the paper so it stays secure and does not crease over the edge.

After pressing, handle the coaster by the sides until it cools and place it on a clean, flat surface. Check color and placement before cleaning or packaging.

If the design looks faded, check temperature, time and paper quality first. If one edge is pale, check pressure and alignment before changing the whole setup.

Store unused blanks in a clean, dry place with the film intact until you print. That protects the coating from dust, scratches and moisture.

What should you check before buying MDF sublimation coasters?

Check the shape, print size, count, backing and preparation steps before comparing the pack price. Those details decide whether the blanks fit your design and how much work each batch takes.

Shape is the first filter because it changes how you build the artwork. Square blanks suit photos, corner patterns and rectangular layouts, while round blanks suit centered logos, monograms and circular borders.

Print size comes next, since a design that fits a 4-inch blank may be crowded on a 2.75-inch car coaster. Measure your design area in software and leave a margin around text and key details.

Count matters for waste and budget. A small pack suits a trial or single gift set, while a bulk pack makes more sense for events, repeat orders or a steady shop queue.

Cork backing adds a softer, grippier underside, which can protect a table and keep the coaster from sliding. Preparation also matters, since some blanks have a protective film to remove and others have no top layer to peel.

Check the care instruction as well. These products list hand-wash or dry-clean guidance, so finished coasters should not be assumed dishwasher-safe.

If you sell finished pieces, tell customers how to clean them and avoid promising durability the blank was not listed for.

Thickness is another practical check. A thicker blank feels more substantial under a mug, while a slim blank fits better in a car cup holder.

Read stated material closely too, since some titles use broad terms.

If your project uses a laser instead of sublimation, compare it with Best Engraving Wood Blanks before ordering. Engraving and heat transfer need different surface treatments.

Match the pack to how you will actually use it. The right blank is the one whose shape, size, count and setup steps fit your design and finished product.

Which blank sublimation MDF coaster is best for you?

Choose LaiHiulaan for the best balance of square size, cork backing and batch quantity. Choose Guiqulai when you need 60 standard square blanks, or AiDiYGECO when the finished pieces are for car cup holders.

For a standard table coaster, the LaiHiulaan set is the easiest place to start. Its 3.86-inch square format and 36-piece count suit gifts, home sets and small client orders.

Pick DV DESIGN if a 50-piece round batch with no top layer to peel fits your workflow. Choose MR.R for a 10-piece trial, Jippedea for a 20-piece round set, Ziliny for 4-inch squares or KUKLIPJIM for 30 large round blanks.

Each of those picks solves a different problem. DV DESIGN saves a preparation step, MR.R limits leftover blanks, and Jippedea gives a manageable round batch.

Ziliny and KUKLIPJIM offer more artwork room than the smaller sets. That can help with photos, larger names and designs that need breathing space.

When you narrow it down, start with the finished use rather than the pack size alone. A car coaster, a table coaster and a gift coaster all need different dimensions.

Also check the film, backing and care instruction before you order. Those details affect setup time, how the coaster feels on a table and how you should clean it later.

If you are making a batch for sale, test one blank first and keep the settings consistent. That helps you spot color, alignment or pressure issues before they affect every piece.

For the next material comparison, see the best sublimation glass coaster blanks and best ceramic sublimation coaster blanks guides.

The best choice is the blank that fits your shape, size, count and workflow. Start with the project you want to make, and the right pack becomes much clearer.

Our top 3 picks at a glance

  1. 1 LaiHiulaan 36pcs Sublimation Square Coaster Blanks Bulk
    Best for balanced square coaster projects

    LaiHiulaan 36pcs Sublimation Square Coaster Blanks Bulk

    9.7/10 our score

    See it on Amazon
  2. 2 Guiqulai 60 Pcs Sublimation Coasters Blanks
    Best for larger square batches

    Guiqulai 60 Pcs Sublimation Coasters Blanks

    9.6/10 our score

    See it on Amazon
  3. 3 AiDiYGECO 64Pcs Sublimation Car Coasters Blanks
    Best for car cup-holder projects

    AiDiYGECO 64Pcs Sublimation Car Coasters Blanks

    9.4/10 our score

    See it on Amazon