Creality Falcon A1 Pro Review: Worth It? (November 2026)
The Creality Falcon A1 Pro suits buyers who want a laser engraver with compatible add-ons for cutting and metal marking. Check the machine’s own specifications and included laser module against your materials, since the accessories covered here are sold separately.
On this page (6 sections)
The Creality Falcon A1 Pro is worth considering if its work area and laser options fit your projects. The accessories in this review include a honeycomb bed for cutouts and a separate infrared module for metal marking, so check what the base machine includes before budgeting for add-ons.
We compared the available accessory details and buyer fit. For a full decision, confirm the machine’s current specifications, included parts, material compatibility and safety instructions with Creality.
What does the Creality Falcon A1 Pro review find?
The Falcon A1 Pro has a compatible ecosystem of add-ons for supporting cuts and expanding material options. The three products below serve different jobs, and the infrared module is a separate upgrade rather than a feature to assume comes with the machine.
Creality Honeycomb Laser Bed for Falcon A1: Best for small cutouts
- 18.1 x 13.6 in
- Iron honeycomb core
- Magnet-compatible soft materials
A honeycomb bed for projects with small cutout pieces that could fall through a grate. Its iron core can hold soft materials with magnets.
Pros
- Sized for the Falcon A1 series
- Helps keep small cutouts in place
- Magnets can hold soft materials
Cons
- Measure your machine and work area before buying
- Does not replace safe laser operation
Creality Honeycomb Working Table 460x346mm: Best for heat and smoke clearance
- 460 x 346 mm overall size
- 430 x 316 mm maximum working area
- 8 mm honeycomb aperture
A honeycomb table designed for heat dissipation and smoke exhaust under a laser project. Check its maximum working area against your material and machine.
Pros
- States both overall size and working area
- Galvanized steel construction with internal supports
- Includes removable corner protectors
Cons
- Working area is smaller than overall dimensions
- Confirm fit with your machine before buying
Creality Falcon 2W 1064nm Infrared Laser Module: Best for metal marking
- 2W infrared module
- 1064 nm wavelength
- Up to 600 mm/s engraving speed
A quick-swap infrared module for the Falcon A1 Pro, aimed at engraving metals and engineering plastics. Creality describes color engraving on stainless steel as one of its uses.
Pros
- Designed for the Falcon A1 Pro
- Intended for metal and engineering plastic marking
- Modular swap with the blue laser
Cons
- Compatibility is limited to Falcon A1 Pro
- Confirm material suitability and safety requirements before use
A honeycomb bed is most relevant when you cut small shapes that could drop through a grate. The infrared module is for buyers who want to mark metals or engineering plastics, while the blue laser remains the other module in the described quick-swap setup.
Which honeycomb bed fits your Falcon A1 Pro plans?
Both Creality honeycomb tables are described for the Falcon A1 series, including the A1 Pro. Their stated dimensions are similar, but the working table gives a separate maximum working area that helps you plan project placement.
| Accessory | Stated size | Useful detail |
|---|---|---|
| Creality Honeycomb Laser Bed for Falcon A1 | 18.1 x 13.6 in | Iron core can hold soft materials with magnets |
| Creality Honeycomb Working Table 460x346mm | 460 x 346 mm overall | Maximum working area is 430 x 316 mm |
Choose based on the actual supported area you need, not just the outside dimensions. Measure the machine bed and compare it with the material size, clamps and any corner clearance before ordering.
A honeycomb surface can support small cutouts while allowing heat and smoke to pass through the grid. Keep the work area clear and follow the machine’s safety instructions, since a bed does not make a laser project fireproof.
If you're still learning the machine’s setup and controls, our guide on how to use the Creality Falcon A1 covers the related workflow. For cut planning, read [What is Kerf?
A Simple Guide for Laser Cutting Pros](/what-is-laser-kerf/), which explains how the width of a cut affects finished dimensions.
What can the Falcon A1 Pro infrared module do?
The separate 2W 1064 nm infrared module is designed for the Falcon A1 Pro and targets metal and engineering plastic marking. Creality describes speeds up to 600 mm/s and a 0.03 mm laser spot, but your material and design can affect the result.
Creality describes color engraving on stainless steel and permanent marks on metals such as aluminum, titanium and brass. The module’s listed materials also include gold, silver, ABS and acrylic; verify the exact material and process before using it.
The quick-swap design is intended to let you switch between the blue laser and infrared module. Check the machine’s compatibility, installation directions and safety guidance, and don’t assume the infrared head replaces the blue laser for every project.
Glass work needs its own material-specific preparation. See How to Laser Engrave Glass Bottles: Pro Settings for a guide to that project type.
What should you verify before buying the machine?
Check the machine’s work area, included laser head and material guidance against your planned projects. Those details determine whether the Falcon A1 Pro can handle your work without add-ons or whether you need to budget for a separate module or support bed.
Confirm these points with current Creality documentation:
- Work area: compare the stated dimensions with your largest usual project.
- Included parts: confirm which laser module and accessories come with the machine.
- Materials: check the supported material list for the exact module you plan to use.
- Setup: review ventilation, surface and clearance requirements for your workspace.
- Software and workflow: make sure the machine works with the design and control tools you intend to use.
The accessories offer specific benefits, but they do not answer every question about the base machine. Ask Creality to clarify any missing detail that could affect a purchase, especially whether the module you want is included or sold separately.
How should you choose between these accessories?
Pick the honeycomb bed that matches your work surface and the material size you plan to cut. Choose the infrared module only if its stated material uses match your projects and you have confirmed compatibility with your Falcon A1 Pro.
The first honeycomb bed is a fit for small cutouts and magnet-held soft materials. The working table provides a stated 430 x 316 mm maximum work area, so compare that figure with your actual project footprint.
The infrared module is the specialized option for metal marking. If your work is mostly wood or other materials suited to the blue laser, first confirm whether the existing module meets your needs.
If your projects include heat-transfer designs as well as laser work, our guide on how to use a Fancierstudio heat press explains a separate tool and workflow.
Is the Creality Falcon A1 Pro right for you?
Choose the Falcon A1 Pro if its verified work area, included equipment and material support line up with your planned projects. Add a honeycomb bed when small cutouts need support, or consider the infrared module when metal marking is a core requirement.
Before you buy, confirm the machine’s current specifications and what comes in the box. Then choose accessories by the work you expect to do, and follow Creality’s safety directions for every material and laser setup.
Frequently asked questions
Is the Creality Falcon A1 Pro a good laser engraver?
It may suit a buyer whose planned projects match the machine’s actual work area, material limits and included laser module. The accessories here add a honeycomb surface or an infrared option, but they do not guarantee the base machine’s speed, power, enclosure or software features.
Check Creality’s current machine specifications before deciding.
Can the Falcon A1 Pro engrave metal?
The separate Creality Falcon 2W 1064nm Infrared Laser Module is designed for the Falcon A1 Pro and is intended for metal marking. Creality describes color engraving on stainless steel and marking on several other metals, but confirm compatibility and safe settings for your material before starting a project.
Do I need a honeycomb bed for the Falcon A1 Pro?
A honeycomb bed can help support small cutout pieces so they are less likely to fall through the machine’s grates. Choose one only after checking its dimensions against your machine and work area; a support bed does not remove the need to manage heat, smoke and fire risk.
What else should I consider before buying a laser engraver?
Match the machine to your materials, project size and workspace, then plan for ventilation, safe operation and a stable work surface. Also check how the machine is set up and how much material is removed during cutting; our guides cover using the Creality Falcon A1 and laser kerf.
About this guide: Our look at the Creality Falcon A1 Pro laser engraver draws on maker specs, materials and what owners report. See how we research.



