7 Best Laser Engraving Knife Blanks (November 2026)
The best laser engraving knife blanks include the SZCO Supplies Tiger Skinner Blade Blank Knife for balanced custom builds, the SZCO Supplies 6.5" Slim Skinner Knife Blade for slim clip-point designs, and the Morakniv Knife Blade Blank Classic No. for carbon steel knife making.
On this page (10 sections)
- How we ranked the best laser engraving knife blanks
- 1. SZCO Supplies Tiger Skinner Blade Blank Knife
- 2. SZCO Supplies 6.5 in Slim Skinner Knife Blade
- 3. Morakniv Knife Blade Blank Classic No. 2
- 4. Hercules Knives Custom Hand Forged Damascus Steel Blank
- 5. AMJ Crafts Damascus Steel RainDrop Hunting Knife Blank
- 6. JNR Traders Damascus Steel Blank Blade
- 7. makerflo The Beast Black Anodized Aluminum Pocket Knife
- How to choose a knife blank for laser engraving
- Which laser engraving knife blank should you buy?
The best laser engraving knife blanks are the SZCO Supplies Tiger Skinner and Slim Skinner blanks for compact stainless steel builds. They bring a familiar metal surface and a manageable size to a custom handle project.
The Morakniv suits carbon steel work for makers who prefer that material. The Hercules, AMJ Crafts and JNR Traders options give you Damascus steel platforms for larger custom handles with a visible layered pattern.
Who a blank suits depends on the finished knife you picture. A compact blank works for a small everyday carry build or a gift piece.
A longer full tang blank suits a hunting or bushcraft style handle where grip length matters more.
Blade length and width set the room you have for a name or maker mark. A longer blade allows larger text, while a narrower blade needs smaller lettering.
Thickness affects how steady the blank feels while you position it for marking.
Tang design also shapes the plan you need before you start. A push tang must sit inside the handle material you choose.
A full tang runs through the handle area, so the handle scales or grip need to match that longer structure.
Set up begins with the handle plan, not the engraving file. Measure the flat area you can actually use after the handle is fitted, and keep the design clear of the edge and any part covered by the guard or handle.
Care is simple for most of these blanks during the build. Hand washing is the stated care for the stainless steel and carbon steel options.
Damascus blanks need a cloth clean and oiling after use, with dry storage between sessions.
The trade off is control against extra work. A loose blank lets you shape the handle and outline you want, but that freedom also means you must source material, fit parts and finish the knife yourself.
Choose a loose blank when you want to build the handle yourself. Choose a finished pocket knife when you need several ready to personalize items for gifts, events or a small craft batch.
For another personalized gift blank, see blank pens for laser engraving.
If your machine is not chosen yet, compare the Best Laser Engraver For Metal before buying a blade. You can also review our guide to best metal laser engraving blanks for other surfaces.
Our picks at a glance
-
1
Best for balanced custom buildsSZCO Supplies Tiger Skinner Blade Blank Knife
9.7/10 our score
See it on Amazon -
2
Best for slim clip-point designsSZCO Supplies 6.5" Slim Skinner Knife Blade
9.5/10 our score
See it on Amazon -
3
Best for carbon steel knife makingMorakniv Knife Blade Blank Classic No.
9.3/10 our score
See it on Amazon
- 4
Check itHercules Knives Custom Hand Forged Damascus Steel Blank
Best for full-tang Damascus builds - 5
Check itAMJ Crafts Damascus Steel RainDrop Hunting knife Blank
Best for handmade drop-point projects - 6
Check itJNR Traders Damascus Steel Blank Blade Knife Making
Best for compact forged Damascus blanks - 7
Check itmakerflo The Beast Black Anodized Aluminum Pocket
Best for batch engraving projects
How we ranked the best laser engraving knife blanks
The best laser engraving knife blanks balance a workable engraving surface with a clear build format. We compared the stated material, blade shape, tang design, dimensions and whether each option is a loose blank or a finished knife.
Our score weighs specs, features and buyer feedback against what you are shopping for. A high score does not mean every knife fits every project, only that the product matches more of the needs behind this keyword.
Surface choice matters first. Stainless steel gives the SZCO picks a familiar metal base, while carbon steel gives the Morakniv a different care profile.
Damascus steel adds a patterned material and appears across the Hercules, AMJ Crafts and JNR Traders blanks.
Each surface asks for a different test process. A patterned Damascus blade already has visual detail, so a design needs enough contrast to read clearly.
A plain stainless surface gives a cleaner field for small text, while carbon steel needs careful cleaning before and after marking.
The build format matters just as much. A push tang needs a handle plan, while a full tang extends through the handle area.
The makerflo option has a finished folding format and a case of 12, so it is better for repeated personalization than for one off knife making.
Dimensions change how you plan the work in practice. A 6.5 in blank fits a compact handle and a small work area.
An 11 in blank needs more bench space, a larger fixture and a handle design that balances the longer blade.
Blade shape changes the usable area as well. A clip point narrows toward the tip, so text placed near the spine reads better than text placed near the point.
A drop point curves down in a different way, and a straight profile keeps the outline simple for centered work.
Who each format suits is tied to time and skill. A loose blank suits a maker who wants to choose handle material and shape.
A finished pocket knife suits a seller or gift maker who needs matching items without a handle build.
Set up should follow the build plan, so confirm the handle zone before you mark anything that could be hidden later. Secure the blank so it cannot shift, and keep your hands clear of the edge while you position it.
Care also feeds into the ranking. The SZCO and Morakniv blanks call for hand washing and dry storage.
The Damascus options add oiling after use, which is a small step that protects the surface between marking sessions.
The trade off is that more design freedom usually means more steps. A blank with no handle material gives you full choice and full responsibility for the result.
A finished knife removes the build step but limits the shape and surface you can work with.
For more metal project ideas, see our guide to Best Blank Plates for Laser Engraving. For display pieces, compare blank plaques for laser engraving.
| Product | Best for | Material | Overall length | Blade | Our score |
|---|---|---|---|---|---|
| SZCO Supplies Tiger Skinner Blade Blank Knife | balanced custom builds | Stainless steel with brass guard | 6.5 in | 4.5 x 1 x 0.157 in clip point | 9.7 |
| SZCO Supplies 6.5" Slim Skinner Knife Blade | slim clip-point designs | Stainless steel with brass guard | 6.5 in | 4.5 x 1 x 0.157 in clip point | 9.5 |
| Morakniv Knife Blade Blank Classic No. | carbon steel knife making | Carbon steel | 9.3 | ||
| Hercules Knives Custom Hand Forged Damascus Steel Blank | full-tang Damascus builds | Damascus steel | 11 in | 5.5 x 1.2 x 0.177 in drop point | 9.0 |
| AMJ Crafts Damascus Steel RainDrop Hunting knife Blank | handmade drop-point projects | Damascus steel | 8 in | 8.7 | |
| JNR Traders Damascus Steel Blank Blade Knife Making | compact forged Damascus blanks | Alloy steel Damascus | 8 in | 4 x 4 x 0.157 in clip point | 8.5 |
| makerflo The Beast Black Anodized Aluminum Pocket | batch engraving projects | 3.25 in serrated stainless steel clip point | 8.2 |
1. SZCO Supplies Tiger Skinner Blade Blank Knife
SZCO Supplies Tiger Skinner Blade Blank Knife: Best for balanced custom builds
- 6.5 in overall length
- 4.5 in blade length
- Stainless steel clip-point blade
- Brass guard and 1/2 in push tang
This SZCO blank combines a stainless steel clip-point blade with a brass guard and push tang. Its 6.5 in size gives you a practical surface for a custom handle and engraved design.
Pros
- Stainless steel blade
- Brass guard included
- Compact overall length
Cons
- Blade blank only
- Push tang needs a suitable handle design
The SZCO Supplies Tiger Skinner Blade Blank Knife is the strongest all-around choice because it combines a manageable size with stainless steel and a brass guard. Its overall length is 6.5 in, with a 4.5 in blade, 1 in width and 4 mm thickness.
The clip-point blade gives the design a defined tip and a long straight area for a simple name, pattern or maker mark. The 1/2 in push tang means your handle design needs to account for how the blade will be secured.
This blank weighs 2.4 oz and includes the blade. It does not include a finished handle, so plan the handle material, shape and engraving position before beginning the build.
Use hand washing for care. Keep the blade clean and dry during the project, and protect the work area from the sharp edge while you position it.
Choose this pick when you want a compact stainless steel blank with a brass detail already included. It is less suitable if you want a full-tang Damascus platform.
2. SZCO Supplies 6.5 in Slim Skinner Knife Blade
SZCO Supplies 6.5" Slim Skinner Knife Blade: Best for slim clip-point designs
- 6.5 in overall length
- 4.5 in stainless steel blade
- 1/2 in push tang
- Brass guard
The slim SZCO blank has the same stated overall and blade dimensions as the Tiger Skinner pick, with a design aimed at compact DIY knife builds and everyday-carry projects.
Pros
- Stainless steel clip point
- Brass guard included
- Light 2.4 oz blank
Cons
- Blade blank only
- Push tang limits handle choices
The SZCO Supplies 6.5 in Slim Skinner Knife Blade is a close alternative to the top pick, with a stainless steel clip-point blade, brass guard and 1/2 in push tang. Its stated dimensions are 6.5 in overall, 4.5 in blade length, 1 in width and 4 mm thickness.
The slim profile works well for a custom knife that needs a compact outline. At 2.4 oz, it is also a light blank to account for when planning the finished handle.
Like the Tiger Skinner, this option includes the blade only. The handle remains your choice, which lets you control the look of the finished knife but adds a separate design and fitting step.
The 4 mm thickness gives the blade a solid feel without making the blank heavy. The 1 in width leaves a modest flat area, so keep engraved text short and place it along the straight part of the blade.
This blank suits a maker who wants a stainless steel clip point for a small everyday carry build. It is less suited to a large hunting handle, where a longer blade and grip would give better balance.
Plan the push tang fit before you mark the blade. Any design placed under the guard or inside the handle zone will be lost once the build is assembled.
Hand wash the blank for care and keep it dry while you work.
Laser engraving knife blanks with compact stainless steel profiles
The two SZCO blanks are the easiest choices here for a small custom build. Their stated 6.5 in overall length and 4.5 in blade length leave enough room to plan a handle while keeping the finished outline compact.
Before engraving, measure the usable flat area rather than assuming the full blade can carry one design. For another personalized equipment project, compare laser engravers for golf clubs.
Keep text away from the edge and choose a position that remains visible after the handle is fitted.
Read How to Laser Engrave a Knife? for setup ideas, focusing, holding the blade and cleaning the finished mark.
3. Morakniv Knife Blade Blank Classic No. 2
Morakniv Knife Blade Blank Classic No.: Best for carbon steel knife making
- Made in Sweden
- Classic No. 2 model
- 4.1 in stated blade length
- Carbon steel construction
Morakniv's Classic No. 2 blank is suited to makers who prefer carbon steel and a straight blade profile.
Pros
- Carbon steel blade
- Made in Sweden
- Straight blade profile
Cons
- No handle or sheath
- Carbon steel needs careful storage
The Morakniv Knife Blade Blank Classic No. 2 is the best match for makers who prefer a carbon steel straight blade.
The product has a stated 4.1 in blade length in its title and is made in Sweden.
Its carbon steel construction gives this blank a different care routine from stainless steel. Carbon steel can suit makers who accept more regular cleaning and dry storage as part of the build process.
The blank includes the knife blade blank only. It does not include a handle or sheath, so you need to plan both parts separately if the finished knife requires them.
The straight shape gives you a simple profile for a centered mark or narrow text treatment. Measure the actual engraving zone after planning the handle, since the visible blade area is only one part of the finished design.
Choose Morakniv for a compact carbon steel project with a straight profile. Choose a SZCO blank if you want stainless steel and a brass guard.
4. Hercules Knives Custom Hand Forged Damascus Steel Blank
Hercules Knives Custom Hand Forged Damascus Steel Blank: Best for full-tang Damascus builds
- 11 in overall length
- 5.5 in blade length
- Damascus steel
- Full tang and non-slip design
This Hercules blank gives a maker a longer full-tang Damascus platform with a drop-point blade. Its size suits larger custom builds where the blade pattern and handle layout are central to the design.
Pros
- Full tang
- Damascus steel
- 5.5 in blade
Cons
- Larger than the SZCO blanks
- Requires oiling after use
The Hercules Knives blank is the best larger platform in this group, with an 11 in overall length and a 5.5 in drop-point blade. It uses Damascus steel and has a full-tang design.
Its stated blade width is 1.2 in and thickness is 4.5 mm. That gives you a larger blade area to plan around, but it also means the project needs more attention to holding, focus and safe handling.
The handle material is described as DIY, so the blank is intended for a custom build. The Damascus construction includes 33 layers of high carbon steel, 33 layers of low carbon steel and VG10 steel.
Hercules recommends cleaning the blade with a cloth and applying vegetable oil after use. Do not leave the Damascus blade wet for long periods, and store it oiled.
Pick this blank when a full tang and 5.5 in blade suit your handle design. Its larger size is less convenient for a small pocket-style engraving project.
5. AMJ Crafts Damascus Steel RainDrop Hunting Knife Blank
AMJ Crafts Damascus Steel RainDrop Hunting knife Blank: Best for handmade drop-point projects
- 8 in overall length
- Damascus steel
- Drop-point blade
- Full-tang construction
The AMJ Crafts blank offers an 8 in full-tang Damascus platform with a drop-point profile. It fits makers who want to create their own handle around a traditional handmade-style blade.
Pros
- Full tang
- Damascus steel
- 8 in overall length
Cons
- No handle material
- No leather sheath
The AMJ Crafts RainDrop blank suits makers who want an 8 in full-tang Damascus platform with a drop-point blade. It is designed for a custom handle, and no handle material or leather sheath is included.
The blank's Damascus steel construction and handmade presentation make the blade pattern part of the finished look. Keep engraved text and graphics simple enough to work with the existing surface pattern.
Its full tang extends through the handle area, which gives you a clear structure for designing scales or another custom grip. Measure the handle zone before drilling, shaping or placing any permanent mark.
This is a good fit for a traditional outdoor-style build. The lack of a handle and sheath gives you more control, but it also means more parts must be planned before the knife is complete.
Choose AMJ Crafts when the 8 in size, drop point and full tang matter more than a compact profile. Pick Morakniv for a smaller straight carbon steel blank.
6. JNR Traders Damascus Steel Blank Blade
JNR Traders Damascus Steel Blank Blade Knife Making: Best for compact forged Damascus blanks
- 8 in overall length
- 4 in blade and handle lengths
- 4 mm blade thickness
- Full tang and 176-layer Damascus steel
JNR Traders gives you an 8 in full-tang blank with a 4 in clip-point blade and a stated 176-layer Damascus construction. It suits makers who want a shorter forged blank for hunting or bushcraft-style builds.
Pros
- Full tang
- 4 mm blade thickness
- Stated 176-layer Damascus construction
Cons
- Requires oiling and dry storage
- Blade blank only
The JNR Traders blank is a compact full-tang option with an 8 in overall length, 4 in blade length, 4 in handle length and 4 mm blade thickness. Its clip-point blade is described as handmade Damascus steel with about 176 layers.
The stated construction uses 15N20 and 1095 alloy steels, with a hardness of HRC 56±1 in the product data. Treat those details as part of the material description, then focus your design on the actual flat area available for engraving.
This blank suits hunting, bushcraft, camping and other outdoor-style knife projects. Its 4 in blade is shorter than the Hercules option, which can make it easier to fit into a compact custom outline.
Keep the blade clean and dry after use. The care instructions also recommend cooking oil or coconut oil and caution against leaving the knife stored in a sheath without oiling.
Choose JNR Traders for a shorter full-tang Damascus build with a clip point. Choose AMJ Crafts for a drop point and a different 8 in blank format.
7. makerflo The Beast Black Anodized Aluminum Pocket Knife
makerflo The Beast Black Anodized Aluminum Pocket: Best for batch engraving projects
- Case of 12
- Black anodized aluminum pocket knife
- 3.25 in serrated stainless steel blade
- Storage case included
The makerflo case gives you 12 black pocket knives for repeated personalization work. It is a finished folding knife format, so it differs from the loose blade blanks used for custom handle builds.
Pros
- 12-piece case
- Black anodized aluminum finish
- Storage case included
Cons
- Finished folding knife, not a loose blade
- Serrated blade may limit engraving placement
The makerflo The Beast is the best choice when you need several finished knives for a batch engraving project. It comes as a case of 12 black anodized aluminum pocket knives with a storage case included.
This is not a loose blade blank. Each knife has a 3.25 in serrated stainless steel clip-point blade, a wood handle, a belt clip and a safety liner lock.
The finished format reduces handle-building work, but it gives you less control over the knife shape than the SZCO, Morakniv and Damascus blanks. The serrated blade also makes the straight handle or another flat finished area a more practical place to plan a design.
The knife is manual and intended for uses such as camping. Hand wash it for care, and keep the engraving area clean before marking.
Pick makerflo when you need 12 matching black pocket knives for names, logos or gifts. Choose a loose blank when your goal is a one-off custom handle and knife shape.
How to choose a knife blank for laser engraving
Start with the material and surface. Stainless steel, carbon steel, Damascus steel and a black anodized aluminum finished knife will not present the same marking surface, so your laser settings and test process need to match the exact item.
Next, decide between a loose blade and a finished pocket knife. A loose blade gives you control over the handle, while the makerflo case gives you 12 finished knives for repeated personalization.
Blade shape also changes the design area. Clip-point and drop-point blades have different tapers, while the Morakniv's straight profile gives you a simpler outline for centered text.
Tang design matters during the build. The SZCO blanks use a 1/2 in push tang, while the Hercules, AMJ Crafts and JNR Traders options use full-tang construction.
Plan the handle before engraving any area that may later be covered. Measure the visible blade after the guard and handle are in place, then set your text size to fit that zone.
A design that looks centered on the loose blank can sit off center on the finished knife.
Finally, check care needs. The Damascus options need dry storage and oiling, while the SZCO and Morakniv blanks call for hand washing.
Good care protects the surface you have just marked and keeps the blank ready for the next step in the build.
Keep every blade secure during setup and protect your hands from the edge. Use a fixture or support that holds the blank flat, and test a small mark on a similar area before you run the full design.
This step is especially useful on Damascus steel, where the pattern can change how a mark appears.
Think about who the finished knife is for before you commit to a design. A gift piece may need a name in large clear letters.
A maker piece may need a small mark that stays quiet against the blade pattern. Matching the design to the user helps you choose size and placement.
For other personalized drinkware projects, see Top 7 Best Blank Tumblers For Laser Engraving. If you also work with wood, our guide to Best Engraving Wood Blanks covers a different material group.
Which laser engraving knife blank should you buy?
Choose the SZCO Supplies Tiger Skinner Blade Blank Knife if you want the best balance of compact size, stainless steel, brass guard and custom-handle potential. Its 6.5 in overall length suits a small build, and the push tang gives you a clear handle plan to work from.
Choose the Slim Skinner when you want a closely related stainless steel format. It shares the same stated dimensions and guard, so the choice comes down to the outline and look you prefer for the finished knife.
Pick the Morakniv for a straight carbon steel blade. This blank has no handle or sheath, so it suits a maker who is ready to plan and source those parts.
Carbon steel also asks for more regular cleaning and dry storage than stainless steel.
Choose Hercules for a larger full-tang Damascus platform. The 11 in size and 5.5 in blade suit a bigger handle, but the blank needs oiling after use and careful handling during setup.
It is a better fit for a dedicated custom build than for a quick gift batch.
Choose AMJ Crafts for an 8 in drop point, or JNR Traders for a shorter 4 in clip-point Damascus blade. Both are full-tang blanks with no handle included, so you control the grip shape and finish.
The JNR blank also needs dry storage and oil to protect the surface.
For batch work, the makerflo case is the clear choice because it includes 12 finished black pocket knives. The serrated blade limits where a design can sit, so the handle or another flat area is often the better surface for a name or logo.
Set-up matters more than the file you load first. Match the laser setup to the material, secure the knife safely and test the mark on a similar surface.
Plan the handle fit before you engrave, since any part covered by the guard or grip will hide the design.
Care after marking should match the blank you picked. Hand wash the stainless steel and carbon steel options and dry them well.
Clean Damascus blanks with a cloth, apply oil and store them dry so the pattern and mark stay in good shape.
Our top 3 picks at a glance
-
1
Best for balanced custom buildsSZCO Supplies Tiger Skinner Blade Blank Knife
9.7/10 our score
See it on Amazon -
2
Best for slim clip-point designsSZCO Supplies 6.5" Slim Skinner Knife Blade
9.5/10 our score
See it on Amazon -
3
Best for carbon steel knife makingMorakniv Knife Blade Blank Classic No.
9.3/10 our score
See it on Amazon
Frequently asked questions
What is the best laser engraving knife blank for beginners?
The SZCO Supplies Tiger Skinner Blade Blank Knife is a practical starting point because it has a 6.5 in overall length, stainless steel clip-point blade, brass guard and 1/2 in push tang. You still need a suitable handle plan and a laser setup that matches the material and finish.
Can you laser engrave Damascus steel knife blanks?
Yes, Damascus steel blanks can be considered for laser engraving, but the visible result depends on the blade finish, contrast and laser settings. Clean and secure the blade, confirm your machine's material limits, and make a small test mark before engraving the final design.
Are knife blanks sold with handles?
Most loose blanks here are intended for custom handle work. The Morakniv blank includes the knife blade blank only, while the AMJ Crafts option has no handle material.
The makerflo option is different because it is a finished case of 12 folding pocket knives.
What should you check before laser engraving a knife?
Check the blade material, coating or finish, flat engraving area and how the knife can be held safely. A rotary tool may help with positioning on curved parts, while a flat fixture is useful for straight blade faces.
Confirm focus and run a test mark first.
About this guide: Our look at laser engraving knife blanks draws on maker specs, materials and what owners report. See how we research.



