Best picks

8 Best Blank Plates for Laser Engraving (November 2026)

Updated on · By the Handyloom team

The best blank laser engraving plates include the LOYORTY 4PCS 6 x 12 x 1/25 for large custom signs, the PATIKIL 8"x2" Blank Name Plates for office name plates, and the HXymxkeqi 6Pcs Black Anodized Aluminum Sheet 5" for compact metal projects.

On this page (6 sections)
  1. The best blank laser engraving plates for different projects
  2. How should you choose blank laser engraving plates?
  3. Are pre-cut name plates better than aluminum sheets?
  4. What should you check before engraving?
  5. Which blank plate is best for labels, awards and identification?
  6. The final check is always the finished use. A desk name plate, equipment label, trophy plaque and business card each need a different size and mounting method, so match the blank to that job first.

The best blank laser engraving plates for most larger signs are the LOYORTY 6 x 12 inch anodized aluminum sheets. At close to 6 by 11.8 inches, each sheet leaves room for text, a border and a mounting area.

Choose PATIKIL for a ready sized 8 x 2 inch name plate you do not need to cut down. Choose Zonon for many small business card sized blanks, or the mixed assortment when size, shape and finish keep changing.

We compared plates by material, working area, pack size, finish and project type. Material matters first because anodized aluminum, stainless steel with a brass finish and ABS behave differently and need different machine settings.

For a coated drinkware example, see electroplated bottle engraving.

Large sheets suit one off signs and custom cut panels. Pre cut plates suit repeat office or desk identification where matching size matters more than custom shaping.

Pack count also matters. A 4 piece or 6 piece set suits testing a layout and making a few pieces.

A 20 piece, 30 piece or 200 piece pack suits repeating the same label or card.

Finish affects readability as well as appearance. Black anodized aluminum with a lighter engraved area reads well on signs.

Black ABS with a white base gives desk plates a different contrast, and gold suits small decorative labels.

Judge size by the artwork area, not only the outside edge. Leave room for margins, adhesive space or mounting holes so the design does not crowd the blank.

For more metal options, compare these best metal laser engraving blanks. If your project involves a specific machine, our guide to the Best Laser Engraver For Metal can help with the equipment side.

Before you buy, match the blank to the finished use. A desk plate, door sign, equipment label and gift plaque each have different needs for mounting, handling and cleaning.

For another gift to engrave, compare luxury pens for engraving.

For another small personalized gift, compare pens for engraving.

Our picks at a glance

  1. 1 LOYORTY 4PCS 6 x 12 x 1/25
    Best for large custom signs

    LOYORTY 4PCS 6 x 12 x 1/25

    9.6/10 our score

    See it on Amazon
  2. 2 PATIKIL 8"x2" Blank Name Plates
    Best for office name plates

    PATIKIL 8"x2" Blank Name Plates

    9.5/10 our score

    See it on Amazon
  3. 3 HXymxkeqi 6Pcs Black Anodized Aluminum Sheet 5"
    Best for compact metal projects

    HXymxkeqi 6Pcs Black Anodized Aluminum Sheet 5"

    9.3/10 our score

    See it on Amazon
  1. 4PATIKIL 7x5x1/32inch Anodized Aluminum SheetCheck it
  2. 5HXYCNNA Name Plates Laser Engraved Laser EngravingCheck it
  3. 6All Quality Name Plate Engraving Blanks

    All Quality Name Plate Engraving Blanks

    Best for professional name plates
    Check it
  4. 7Zonon 200 Pack Engraving Aluminum Plates

    Zonon 200 Pack Engraving Aluminum Plates

    Best for high-volume small plates
    Check it
  5. 8Custom Engraving Plates Laser Engraving Blank Plate AssortmentCheck it

The best blank laser engraving plates for different projects

The best blank laser engraving plate depends on your finished size and material needs. Large sheets give you layout freedom, while pre-cut plates reduce preparation and help keep repeated projects consistent.

Our score weighs specs, features and buyer feedback against what you’re shopping for.

ProductBest forMaterialSizePackOur score
LOYORTY 4PCS 6 x 12 x 1/25large custom signs5052 anodized aluminum6 x 11.8 x 0.04 in4 pieces9.6
PATIKIL 8"x2" Blank Name Platesoffice name platesABS8 x 2 x 0.05 in20 pieces9.5
HXymxkeqi 6Pcs Black Anodized Aluminum Sheet 5"compact metal projects5052 anodized aluminum5 x 7 x 1/32 in6 pieces9.3
PATIKIL 7x5x1/32inch Anodized Aluminum Sheetrepeat plaque workAnodized aluminum7 x 5 x 0.04 in10 pieces9.1
HXYCNNA Name Plates Laser Engraved Laser Engravingsmall adhesive plaquesStainless steel with brass finish1 x 2.5 in30 pieces8.9
All Quality Name Plate Engraving Blanksprofessional name platesABS2 x 8 in10 pieces8.6
Zonon 200 Pack Engraving Aluminum Plateshigh-volume small platesAluminum86 x 54 x 0.21 mm200 pieces8.4
Custom Engraving Plates Laser Engraving Blank Plate Assortmentmixed plate sizes0.50 mm anodized aluminum15 pieces8.1
1

LOYORTY 4PCS 6 x 12 x 1/25: Best for large custom signs

LOYORTY 4PCS 6 x 12 x 1/25, blank laser engraving plates
9.6/10Our score
  • 4 black anodized aluminum sheets
  • 6 x 12 x 0.04 in
  • 5052 aluminum alloy
  • Protective film on both sides

Large black anodized aluminum sheets give you room for signs, plaques and decorative panels. The thin 0.04-inch format suits projects that need a flat, easy-to-cut blank.

See it on Amazon

Pros

  • Largest sheet size here
  • Black anodized surface
  • Protective film on both sides

Cons

  • Requires cutting for small labels
  • Thin sheet needs careful handling

LOYORTY is the strongest pick when you need a broad blank for a sign, plaque or decorative panel. Each sheet is about 6 x 11.8 x 0.04 inches, giving you more layout room than the smaller pre cut plates.

The sheets use 5052 aluminum alloy with a black sandblasted anodized surface. That dark finish creates a clear starting point for engraved text and designs, while the thin format keeps the material suited to cutting and precision work.

The 0.04 inch thickness is thin enough to handle and cut with care, yet it holds a flat sheet form for a sign or panel. In daily use, that thinness means you should support the sheet well during placement and avoid bending it while removing film or moving it between steps.

This pack contains 4 plates, and the front and back have protective film for transport. Remove the film before engraving, secure the sheet flat, and keep the work area clear of debris that could affect placement.

A 4 piece pack suits a buyer who wants to cut several custom shapes from a larger blank, rather than a buyer who needs dozens of identical small labels. You can plan one large layout, or divide the sheet into smaller pieces after measuring carefully.

Choose LOYORTY when you want to create your own plate dimensions. If your project is already based on a desk nameplate size, a pre cut ABS option may save time.

LOYORTY 4PCS 6 x 12 x 1/25Check it on Amazon
2

PATIKIL 8"x2" Blank Name Plates: Best for office name plates

PATIKIL 8"x2" Blank Name Plates, blank laser engraving plates
9.5/10Our score
  • 20 black and white ABS plates
  • 8 x 2 x 0.05 in
  • Scratch-resistant surface
  • Tabletop format

These long rectangular plates are sized for desk names, office signs and similar identification work. The black front reveals a white background after engraving.

See it on Amazon

Pros

  • 20-piece pack
  • Ready-made 8 x 2 in shape
  • White engraving contrast

Cons

  • ABS is not metal
  • Front protective layer must be removed

PATIKIL is the easiest fit for repeated 8 x 2 inch office and desk name plates. The 20-piece pack gives you ready-sized blanks instead of a larger sheet that must be cut down.

Each plate is ABS with a black front and white base. Engraved information reveals the lighter background, so the finished text is designed to stand out against the dark face.

The landscape format gives a long horizontal line for a name, a title or a short office message. That shape suits a desk or tabletop setting where the plate is read from across a small space, and it helps keep repeated plates consistent from one job to the next.

The 0.05-inch thickness gives the plate a defined tabletop form. The surface is described as scratch resistant, abrasion resistant, waterproof and easy to clean, which suits office, hotel and commercial identification work.

For care, a simple wipe after use should be enough for most office settings, since the surface is described as easy to clean even if dirty. Store the blanks flat and keep the unused plates protected until you are ready to remove the front layer and engrave them.

Remove the anti-scratch layer from the front before engraving. This option is best when you need many matching name plates, not when you specifically need an aluminum plaque.

PATIKIL 8"x2" Blank Name PlatesCheck it on Amazon
3

HXymxkeqi 6Pcs Black Anodized Aluminum Sheet 5": Best for compact metal projects

HXymxkeqi 6Pcs Black Anodized Aluminum Sheet 5", blank laser engraving plates
9.3/10Our score
  • 6 black anodized aluminum sheets
  • 5 x 7 x 1/32 in
  • 5052 aluminum alloy
  • Protective PE film

The 5 x 7 inch sheets fit smaller signs, labels and decorative work while retaining a black anodized metal surface. Their 0.8 mm thickness keeps the blanks relatively light.

See it on Amazon

Pros

  • Compact sheet size
  • 6-piece pack
  • Corrosion-resistant finish

Cons

  • Less surface area than 6 x 12 in sheets
  • Protective film must be peeled before use

HXymxkeqi suits compact metal projects that need more room than a small label but less material than a 6 x 12 inch sheet. Its 5 x 7 inch black anodized aluminum blanks fit signs, labels, decorative pieces and similar work.

The 6-piece set uses 5052 aluminum alloy with a 1/32-inch, or 0.8 mm, thickness. Each sheet has a protective PE film, which should be removed before loading the blank for engraving.

The 5 by 7 inch footprint is easier to align and store than a larger sheet, which can help when you are working in a smaller space. It also means the design area is fixed, so a plaque layout with a border and several lines of text should be checked against the actual blank size before you start.

The black anodized surface is described as corrosion resistant, so the finished piece can suit decorative and label work where a metal look is wanted. Because each sheet is light, handling them in a small batch is straightforward, but you should still secure the blank flat so the engraving stays true to the layout.

The smaller footprint can make alignment and storage easier. It also limits the maximum design area, so measure your artwork before choosing this format for a plaque or sign.

Choose HXymxkeqi when a compact aluminum sheet is the right balance. For more repeated projects, the 10-piece PATIKIL set gives you more blanks in a similar medium-size range.

HXymxkeqi 6Pcs Black Anodized Aluminum Sheet 5"Check it on Amazon
4

PATIKIL 7x5x1/32inch Anodized Aluminum Sheet: Best for repeat plaque work

PATIKIL 7x5x1/32inch Anodized Aluminum Sheet, blank laser engraving plates
9.1/10Our score
  • 10 black anodized aluminum sheets
  • 7 x 5 x 1/32 in
  • 0.8 mm thickness
  • Smooth oxidized surface

A 10-piece supply of medium aluminum blanks works well for repeat labels, plaques and desk signs. The 7 x 5 inch format balances usable area with easier handling.

See it on Amazon

Pros

  • 10-piece pack
  • Medium rectangular format
  • Smooth black surface

Cons

  • Smaller than the largest sheets
  • Front anti-scratch layer must be removed

PATIKIL’s 7 x 5 inch sheets are a good middle ground for repeat aluminum plaque and label work. The 10-piece pack gives you several chances to produce matching signs or keep spare blanks ready.

Each black anodized aluminum sheet is 0.8 mm thick. The smooth oxidized surface is intended for laser engraving and can be used for signs, badges, trophies, business cards and label plates.

The 7 by 5 inch rectangle gives more room than a small label, while staying easier to handle than a 6 by 12 inch sheet. That balance can suit a desk sign, a door plate or a plaque where the text needs a border and a clear margin around the engraved area.

The surface is described as smooth and scratch resistant after oxidation treatment, with no cracks or holes, and it does not easily adhere to dust. For daily care, that can make cleaning simpler, since a finished plate should wipe clean more readily than a rough or dusty surface.

The plates have an anti-scratch layer on the front. Peel it away before engraving, then use a professional laser printer and standard protective measures for the material and machine you operate.

Keeping spare blanks in the same pack helps when you are making a set, because you can replace a test piece without starting a new order. Choose this set when you want more pieces than the 6-sheet HXymxkeqi pack.

The LOYORTY sheets are a better fit when the design needs a longer 6 x 12 inch layout.

PATIKIL 7x5x1/32inch Anodized Aluminum SheetCheck it on Amazon
5

HXYCNNA Name Plates Laser Engraved Laser Engraving: Best for small adhesive plaques

HXYCNNA Name Plates Laser Engraved Laser Engraving, blank laser engraving plates
8.9/10Our score
  • 30 gold stainless steel and brass-finish plates
  • 1 x 2.5 in
  • Adhesive backing
  • Notched corner design

Small gold plates suit short labels, memorials, gifts and display pieces where adhesive mounting is useful. They are intended for DIY laser engraving rather than mechanical engraving.

See it on Amazon

Pros

  • 30-piece pack
  • Adhesive backing
  • Gold finish

Cons

  • Small engraving area
  • Not intended for mechanical engraving

HXYCNNA is made for small labels where a finished plate and adhesive backing matter more than a large engraving area. The 1 x 2.5 inch gold plates suit short names, markers, gifts, memorials and display pieces.

The 30 plates use stainless steel with a brass finish. For actual brass, see whether a UV laser can engrave brass.

Their notched-corner design adds a defined shape, while the adhesive backing helps mount each finished piece to a smooth surface.

The 1 inch height is the key limit for the design. A single short name or a few words can fit well, but a long title or a detailed logo will feel crowded.

Plan the text first, then check that the lettering still reads clearly at that small size.

Adhesive mounting means preparation matters before you stick the plate down. Make sure the target surface is smooth and clean, and test the placement so the label sits straight on a frame, box, plaque or display piece.

These blanks are intended for DIY laser engraving and are not intended for mechanical engraving. Keep the design short enough to fit the narrow 1-inch height, and confirm your mounting surface is smooth and clean.

Choose HXYCNNA for small adhesive plaques. If you need a larger name plate for a desk or equipment label, the All Quality or PATIKIL options provide more surface area.

HXYCNNA Name Plates Laser Engraved Laser EngravingCheck it on Amazon
6

All Quality Name Plate Engraving Blanks: Best for professional name plates

All Quality Name Plate Engraving Blanks, blank laser engraving plates
8.6/10Our score
  • 10 black and gold ABS plates
  • 2 x 8 in
  • 0.003 in engraving depth
  • Door and tabletop mounting

These black and gold plates are sized for professional desk plates, equipment labels and identification signs. They are intended for professional engraving equipment and require ventilation or filtration.

See it on Amazon

Pros

  • Professional equipment focus
  • Black and gold finish
  • 10-piece pack

Cons

  • Not designed for consumer-grade tools
  • Ventilation or filtration is required

All Quality fits professional nameplate work where you need a consistent 2 x 8 inch black and gold ABS format. The 10-piece pack works for desk plates, equipment labels, signage inserts, awards and identification tags.

These blanks are intended for professional engraving equipment only. The stated engraving depth is 0.003 inch, and ventilation or filtration is required during engraving.

That shallow engraving depth suits name and identification text rather than a deep decorative cut. In practice, the design should stay focused on clear lettering, because the finished result depends on a clean, readable mark on a long landscape plate.

The landscape shape provides a long line for names or identification text. ABS makes this a different choice from the aluminum sheets, so select it for its finished nameplate format rather than for a metal look.

The 2 by 8 inch size also works for equipment labels and signage inserts where a longer plate gives more room than a small square label. For door or tabletop use, the mounting plan should be decided before engraving so the text stays in the right position.

Choose All Quality if your equipment and workspace meet those requirements. For casual craft projects or metal plaques, consider one of the anodized aluminum picks instead.

All Quality Name Plate Engraving BlanksCheck it on Amazon
7

Zonon 200 Pack Engraving Aluminum Plates: Best for high-volume small plates

Zonon 200 Pack Engraving Aluminum Plates, blank laser engraving plates
8.4/10Our score
  • 200 black matte aluminum plates
  • 86 x 54 x 0.21 mm
  • Business-card format
  • Suitable for CNC and laser crafting

The 200-piece pack is built around small business-card-sized blanks for repeated labels, cards and promotional pieces. Its high count suits production runs more than one-off plaques.

See it on Amazon

Pros

  • Largest pack here
  • Compact business-card format
  • Black matte finish

Cons

  • Small working area
  • Not suited to large signs

Zonon is the volume choice for repeated small plates, cards and promotional pieces. The 200 black matte aluminum blanks measure 86 x 54 x 0.21 mm, close to a standard business-card format.

The compact size makes each blank easy to group into a batch, but it also limits the design area. Plan short text, simple marks or small layouts rather than a large plaque design.

At 86 by 54 mm, the blank fits the kind of small card format many people already know how to handle and store. That can help with business cards, gift cards and small promotional pieces, where the design needs to stay simple and easy to read at a glance.

The 0.21 mm thickness keeps each piece light, which is useful when you are working through a long run. You should still keep the blanks flat and separate during storage, so a large pack stays organized and ready for the next batch.

This pack makes more sense for production runs than for a single custom sign. Keep the blanks organized by project, and confirm your engraving layout fits within the stated 86 x 54 mm surface.

Choose Zonon when quantity matters most. If you need only a few pieces but want several colors and shapes, the 15-piece Custom Engraving Plates assortment is more flexible.

Zonon 200 Pack Engraving Aluminum PlatesCheck it on Amazon
8

Custom Engraving Plates Laser Engraving Blank Plate Assortment: Best for mixed plate sizes

Custom Engraving Plates Laser Engraving Blank Plate Assortment, blank laser engraving plates
8.1/10Our score
  • 15 aluminum plates
  • Gold, silver and black finishes
  • Sizes from 1.5 to 4 in
  • Rounded, notched and 4-hole styles

The mixed assortment gives you several plate shapes, colors and mounting styles for varied projects. It is made for CO2 laser engraving and is not intended for rotary engraving.

See it on Amazon

Pros

  • Multiple colors and shapes
  • 15-piece assortment
  • Includes mounting-hole styles

Cons

  • Sizes vary by assortment
  • Not intended for rotary engraving

Custom Engraving Plates is the most flexible pick when your projects vary in size and mounting style. The 15-piece assortment includes gold, silver and black anodized aluminum plates in sizes from 1.5 to 4 inches.

The assortment includes rounded-corner plates, notched plates, 4-hole mounting plates and 4-hole notched designs. That range can help when one project needs a small nameplate and another needs a plate with mounting holes.

Having several shapes in one pack can save time when you are not sure which format a job will need. A rounded corner plate can suit a decorative piece, while a 4-hole plate gives a direct way to secure a sign or label without relying on adhesive.

The aluminum is 0.50 mm thick, and the assortment is designed for CO2 laser engraving. It is not intended for rotary engraving, so match it to the correct machine before starting.

Because sizes vary across the assortment, it helps to sort the plates by size and mounting style before you plan a batch. That way you can match each design to a plate that already has the right shape, instead of trying to force every layout onto the same blank.

Choose this set for variety rather than a uniform batch. For repeated identical plates, a single-size pack is easier to plan and reorder.

Custom Engraving Plates Laser Engraving Blank Plate AssortmentCheck it on Amazon

How should you choose blank laser engraving plates?

Choose blank laser engraving plates by material first, then finished size, pack count and machine type. Aluminum suits metal labels and plaques, while ABS can work for nameplates with a contrasting base color.

Material also affects the feel of the finished piece. Anodized aluminum gives a metal plaque or sign, while ABS gives a lighter name plate for office and desk use.

Stainless steel with a brass finish gives a different look for small gold labels.

Measure the artwork area, not just the outside of the finished object. Leave room for margins, mounting holes, adhesive space or any border the design needs.

That margin matters more on small blanks. A 1 x 2.5 inch plate or an 86 x 54 mm card leaves little room for extra text, so a short layout planned in advance reads better.

For large signs, start with the LOYORTY 6 x 12 inch sheets. For medium aluminum work, compare the HXymxkeqi 5 x 7 inch sheets with PATIKIL's 7 x 5 inch, 10-piece set.

Pack count should match how often you repeat the job. A small pack suits a one off panel or a test layout.

Larger packs suit office name plates, adhesive labels or business cards made in a run.

Machine type is the next check. Some blanks are aimed at laser engraving, some at CO2 laser engraving, and some at professional engraving equipment.

The HXYCNNA plates and the Custom Engraving Plates assortment are not intended for every engraving method.

Check material and mounting plan for outdoor equipment labels. A laserable surface does not by itself decide whether a finished plate suits every location.

Cleaning and handling also differ. A smooth anodized surface, a scratch resistant ABS face and a metal plate with adhesive backing each need slightly different care after engraving.

The best choice is usually the blank that already matches the finished size and mounting method. That reduces cutting, trimming and guesswork before the first run.

Are pre-cut name plates better than aluminum sheets?

Pre-cut name plates are better when you need consistent dimensions and faster setup. Aluminum sheets are better when you need to choose the final shape or fit a larger custom layout.

Pre cut plates remove a step from the process. You can move straight to layout and engraving, which helps when you need a set of matching desk plates or office signs.

Every blank starts at the same size, so repeat jobs are easier to plan.

PATIKIL's 8 x 2 inch ABS plates are ready for repeated office nameplates. HXYCNNA's small gold plates add adhesive mounting, while the larger aluminum sheets leave more room for custom cutting and design placement.

The trade off is design area. A pre cut plate fixes the shape and the maximum text area, so a long logo or a detailed border may not fit.

A full sheet gives you control over the final cut, but you need to measure, cut and finish the edges before engraving.

Mounting style also differs between the two approaches. Some pre cut plates are made for a tabletop or desk setting, some have adhesive backing, and some assortment plates have mounting holes.

A sheet can be cut to suit a mounting plan, but only if you plan that plan before you start.

For a single custom sign, the extra control of a sheet can be worth the preparation. For a set of identical name plates, the saved time from a pre cut blank is often the better fit.

What should you check before engraving?

Before engraving, confirm the material, remove any protective film and secure the blank flat. Use the machine settings appropriate for that material.

Ventilation and personal protective measures are part of safe engraving work. The blanks here are not all the same, so settings should be matched to the material and the machine you are using.

Anodized aluminum, ABS and stainless steel with a brass finish each call for different settings. The PATIKIL and LOYORTY products include protective layers that need removal before use.

All Quality requires ventilation or filtration. The Custom Engraving Plates assortment is for CO2 laser engraving rather than rotary engraving.

Remove film before placing the blank for engraving, not after a design has started. A layer left on the surface can affect the result and waste a blank, especially from a small pack.

Check text direction, margins and plate orientation before running a full batch. This matters especially when the blank has adhesive backing or mounting holes.

Orientation is easy to miss on a long landscape plate or a small notched label. Check that text reads the right way and that holes or adhesive areas sit in the correct position.

For projects involving knife handles or similar parts, see these best laser engraving knife blanks. For drinkware projects, compare the Top 7 Best Blank Tumblers For Laser Engraving.

A short test on one blank can confirm spacing before you commit to a run. That step is worth it for repeated labels, awards or identification plates.

Which blank plate is best for labels, awards and identification?

Choose LOYORTY for large custom plaques and signs, PATIKIL 8 x 2 inch plates for office nameplates, and HXYCNNA for small adhesive labels. Pick Zonon for 200 repeated small plates, or the assortment when shape and color matter most.

A large sheet gives the most freedom for a custom layout. A pre cut name plate gives consistency for desk work, an adhesive plate mounts a small label quickly, and a high count pack gives volume for repeated cards.

For wood-based awards or mixed-material projects, our guide to Best Engraving Wood Blanks covers a different blank category. Keep the material, finished size and machine type aligned before you order.

Wood, metal and ABS blanks should not be treated as interchangeable. The material decides the look and feel of the finished piece, and also which machine settings and safety steps apply.

For most buyers, LOYORTY earns the top score because its large anodized aluminum sheets offer the most layout freedom. Choose a pre-cut pack when repeatability matters more than design flexibility, and choose Zonon when batch quantity is the priority.

The 5 x 7 inch and 7 x 5 inch options sit between those extremes for medium sized aluminum plaques. They give more room than a small label without the full size of a 6 x 12 inch sheet.

The final check is always the finished use. A desk name plate, equipment label, trophy plaque and business card each need a different size and mounting method, so match the blank to that job first.

Our top 3 picks at a glance

  1. 1 LOYORTY 4PCS 6 x 12 x 1/25
    Best for large custom signs

    LOYORTY 4PCS 6 x 12 x 1/25

    9.6/10 our score

    See it on Amazon
  2. 2 PATIKIL 8"x2" Blank Name Plates
    Best for office name plates

    PATIKIL 8"x2" Blank Name Plates

    9.5/10 our score

    See it on Amazon
  3. 3 HXymxkeqi 6Pcs Black Anodized Aluminum Sheet 5"
    Best for compact metal projects

    HXymxkeqi 6Pcs Black Anodized Aluminum Sheet 5"

    9.3/10 our score

    See it on Amazon

Frequently asked questions

What are the best blank laser engraving plates for large signs?

The LOYORTY sheets are the strongest fit for large signs because they measure about 6 x 11.8 inches and use a black anodized aluminum surface. The HXymxkeqi and PATIKIL sheets suit smaller signs, plaques and labels when a 5 x 7 or 7 x 5 inch blank is easier to handle.

Are blank laser engraving plates made of metal?

Many are metal, including the LOYORTY, HXymxkeqi, PATIKIL aluminum, HXYCNNA and Zonon plates. The PATIKIL 8 x 2 inch plates and All Quality name plates use ABS, so check the material before choosing a laser setting or planning the finished use.

What size blank plate should you choose?

Choose the smallest plate that fits the finished text, logo or identification details. Use 6 x 12 inch sheets for larger layouts, 5 x 7 or 7 x 5 inch blanks for medium work, and 1 x 2.5 inch or business-card-size plates for short labels.

Can you use every blank plate with a rotary engraver?

No. The HXYCNNA plates are intended for laser engraving rather than mechanical engraving, and the Custom Engraving Plates assortment is specifically for CO2 laser engraving rather than rotary engraving.

Confirm the material and machine requirements before starting.