6 Best Coin Blanks for Laser Engraving (November 2026)
The best laser engraving coin blanks include the Rainteam Blank Brass Challenge Coin Laser Engraving for premium brass keepsakes, the Funria 12 Pcs 40mm X 3mm Brass for double-sided designs, and the Xdkyzrs 10PCS 40mm Blank Brass Coins for beginner craft batches.
On this page (4 sections)
The best laser engraving coin blanks for most makers are the Rainteam 40 mm solid brass blanks, with 10 coins, 3 mm thickness and individual acrylic protection boxes.
That combination suits makers who want a thick blank with a solid brass feel for keepsakes and challenge coins.
Choose Funria for double-sided designs, ZDQCB for 20 solid brass blanks, or a 24-piece alloy set for a larger batch.
Coin blanks are useful for custom challenge coins, tokens, memorial keepsakes, awards, pet tags and small gifts.
They also work for event pieces, club tokens and one-off presents with a name, date or short message.
For another metal blank project, compare knife blanks for laser engraving.
The main choice is not only the finish.
You also need to compare the metal, thickness, edge style, surface coating and number of blanks in the pack.
Those details affect how the coin feels in hand and how much room you have for a design.
A 40 mm blank leaves a clear central area for a logo or text.
That size also fits well in a small case for storage or giving.
Thickness changes the weight and the way you set focus and secure the coin.
Surface treatment can change the contrast you get from fine lines and lettering.
Pack count matters too, especially when you need spare blanks for testing.
This guide compares solid brass and alloy options so you can match the blank to the project.
It also explains setup steps that help keep alignment consistent across a batch.
For related metal projects, see our guide to Pro Laser Engraving Techniques for Custom Jewelry.
If you also work with small wearable pieces, our guide to best laser engraving jewelry blanks covers other blank shapes.
Our picks at a glance
-
1
Best for premium brass keepsakesRainteam Blank Brass Challenge Coin Laser Engraving
9.7/10 our score
See it on Amazon -
2
-
3
Best for beginner craft batchesXdkyzrs 10PCS 40mm Blank Brass Coins
9.3/10 our score
See it on Amazon
- 4
Check itZDQCB Solid Brass Blank Coins for Laser
Best for larger brass batches - 5
Check itALRALLI 24PCS Alloy Challenge Coin Blanks
Best for high-volume silver finishes - 6
Check itweparmeety 24 Pcs 40mm Blanks Challenge Coin
Best for economical gold-tone batches
The best laser engraving coin blanks by project
Rainteam is the strongest all-around choice for thick solid brass, while Funria is better for double-sided work and the 24-piece alloy sets suit larger batches. Choose your metal and finish before planning the design.
Our score weighs specs, features and buyer feedback against what you're shopping for. We compared the stated materials, measurements, pack sizes, edge designs, protection and engraving uses.
| Product | Best for | Material | Size | Pack | Our score |
|---|---|---|---|---|---|
| Rainteam Blank Brass Challenge Coin Laser Engraving | premium brass keepsakes | Solid brass | 40 mm diameter x 3 mm thick | 10 coins | 9.7 |
| Funria 12 Pcs 40mm X 3mm Brass | double-sided designs | Solid brass | 40 mm diameter x 3 mm thick | 12 coins | 9.6 |
| Xdkyzrs 10PCS 40mm Blank Brass Coins | beginner craft batches | Pure brass | 40 mm diameter x 2.2 mm thick | 10 coins | 9.3 |
| ZDQCB Solid Brass Blank Coins for Laser | larger brass batches | Solid brass | 40 mm diameter x 3 mm thick | 20 coins | 9.1 |
| ALRALLI 24PCS Alloy Challenge Coin Blanks | high-volume silver finishes | Zinc alloy with silver plating | 40 mm x 2 mm | 24 coins | 9.0 |
| weparmeety 24 Pcs 40mm Blanks Challenge Coin | economical gold-tone batches | Alloy | 40 mm diameter x 2 mm thick | 24 coins | 8.8 |
Rainteam Blank Brass Challenge Coin Laser Engraving: Best for premium brass keepsakes
- 10 solid brass coins
- 40 mm diameter and 3 mm thickness
- Protective coating
- Individual acrylic protection boxes
Rainteam gives makers thick 40 mm solid brass blanks with individual acrylic boxes. The protective coating should be removed before engraving for better results.
Pros
- Thick solid brass blanks
- Individual acrylic boxes
- Suitable for laser engraving, stamping and etching
Cons
- Only 10 coins per set
- No hole
Rainteam is the best fit when you want a 40 mm solid brass coin with 3 mm thickness. That thickness gives the blank a substantial feel for challenge coins, commemorative pieces and keepsakes.
Each set contains 10 coins, and each coin has its own transparent acrylic protection box. The boxes help keep the surfaces protected before engraving and make finished pieces easier to store or present.
The coins have a protective coating that helps prevent oxidation. Remove that coating before engraving if you want better engraving results.
The blanks have no hole, so plan to use them as stand-alone coins unless you add another finishing step.
The brushed brass surface suits makers who want a warm metal base for text, logos or simple line art. Clean the surface after removing the coating, then secure the coin flat before setting your design.
Choose Rainteam when thickness, solid brass and individual storage matter more than getting the largest count. It is also a strong option for a small run of polished gifts.
Funria 12 Pcs 40mm X 3mm Brass: Best for double-sided designs
- 12 solid brass coins
- 40 mm diameter and 3 mm thickness
- Threaded edge
- Acrylic protection boxes
Funria combines 3 mm solid brass blanks with threaded edges and surfaces designed for engraving on both sides. The set includes 12 coins with transparent acrylic storage boxes.
Pros
- Double-sided engraving surface
- Threaded edge
- 12-piece pack
Cons
- No stated hole
- Threaded edges may not suit a plain-edge design
Funria is the best choice here for makers who want engraving on both sides. The 40 mm coins are 3 mm thick and made from solid brass, so they match Rainteam on the main size and thickness points.
The threaded edge gives each blank a more detailed border than a plain-edged coin. That edge can help a badge-like design look finished, though it may not suit artwork that needs a completely simple outline.
The pack includes 12 coins, and every coin has a transparent acrylic storage box. Funria also describes the blanks as suitable for custom patterns, logos and text for gifts, events, anniversaries and challenge coins.
Use a simple alignment method if you engrave both faces. Mark the same reference direction on your fixture, test the positioning on a spare blank, and keep the design inside the usable flat area.
Pick Funria when a threaded edge and two-sided engraving are more useful than a larger pack. It is a practical middle ground between a small gift batch and a larger production run.
Xdkyzrs 10PCS 40mm Blank Brass Coins: Best for beginner craft batches
- 10 pure brass coins
- 40 mm diameter and 2.2 mm thickness
- Sandblasted surface
- Designed for laser engraving, stamping or painting
Xdkyzrs offers a slightly thinner 40 mm brass blank with a sandblasted surface. It fits small custom batches for tokens, keepsakes, awards and hobby projects.
Pros
- Smooth sandblasted surface
- Pure brass
- Suitable for several craft methods
Cons
- Thinner than the 3 mm picks
- 10-piece pack
Xdkyzrs suits beginners and hobby makers who want 10 pure brass blanks with a sandblasted surface. Each coin measures 40 mm across and 2.2 mm thick, making it slightly thinner than the 3 mm options above.
The sandblasted surface is described as smooth and uniform for detailed personalization. The coins are intended for laser engraving, stamping or painting, so they can support more than one type of craft project.
The set works well for custom challenge coins, memorial tokens, promotional pieces, awards and game tokens. For another personalized gift blank, see blank pens for laser engraving.
Its 10-piece count gives you enough blanks for a small batch while leaving room for a test design.
Because these blanks are 2.2 mm thick, check your fixture and focus height before starting. Keep the coin level and make sure the surface is free from dust or residue that could affect the mark.
Choose Xdkyzrs when you want pure brass and a smooth working surface without needing a 3 mm blank. It is a good fit for small projects where a 10-piece pack is enough.
ZDQCB Solid Brass Blank Coins for Laser: Best for larger brass batches
- 20 solid brass coin blanks
- 40 mm diameter and 3 mm thickness
- Gear-edged design
- Protective plastic cases
ZDQCB is the larger solid brass batch in this group, with 20 gear-edged blanks and protective plastic cases. Its edge adds a decorative detail around engraved designs.
Pros
- 20-piece pack
- Solid brass construction
- Distinctive gear-edged design
Cons
- Decorative edge may not fit every design
- Finish choice needs careful checking
ZDQCB is the best fit for a 20-piece batch of 3 mm solid brass blanks. Each coin is 40 mm in diameter and has a gear-edged design that adds a decorative border around the engraving area.
The 20-piece count gives you more blanks than the 10- and 12-piece brass sets. That helps when you are making matching gifts, event tokens or several design versions.
Each blank comes in a clear plastic case for protection during shipping and storage. The coins are described as suitable for engraving, jewelry projects, keychains and personalized gifts.
ZDQCB also lists several finish options, including gold plating, silver plating, rose gold or pink plating, and raw zinc alloy. The natural brass finish in this pick is the solid brass option described here.
If you choose a coated finish, confirm the correct laser type before marking it.
Pick ZDQCB when you want more solid brass blanks and like the gear-edged style. Skip it if your design needs a completely plain outer edge.
ALRALLI 24PCS Alloy Challenge Coin Blanks: Best for high-volume silver finishes
- 24 alloy blanks
- 40 mm x 2 mm
- Silver-plated finish
- Individual acrylic protection boxes
ALRALLI gives you 24 thin alloy blanks with a silver-plated finish. Both sides are smooth and suitable for laser engraving, making this a practical high-volume option.
Pros
- Largest pack in this group
- Silver-plated appearance
- Both sides are smooth
Cons
- Not solid brass
- 2 mm thickness
ALRALLI is the strongest choice for 24 silver-plated blanks. The coins are 40 mm by 2 mm, made with a zinc alloy core and silver plating rather than solid brass.
Both sides are smooth and suitable for laser engraving. That gives you room for a front design and a reverse message, provided your setup can align both faces accurately.
Every coin comes in an individual transparent acrylic protection box. The cases help keep the silver-plated surface clean before engraving and make finished pieces easier to separate.
The 24-piece pack works well for wedding favors, milestone gifts, coworker keepsakes, charms and small medallions. The silver finish gives the finished piece a different look from the warmer brass options.
Choose ALRALLI when you need the largest pack in this comparison and want a silver appearance. Remember that the alloy core and 2 mm thickness make it a different material choice from the solid brass picks.
weparmeety 24 Pcs 40mm Blanks Challenge Coin: Best for economical gold-tone batches
- 24 alloy coins
- 40 mm diameter and 2 mm thickness
- Non-electroplated brushed finish
- Individual acrylic protection boxes
weparmeety is a 24-piece alloy set with a non-electroplated brushed finish. The 2 mm threaded-edge blanks suit makers who need many gold-tone pieces for one project.
Pros
- 24-piece pack
- Brushed finish
- Individual acrylic protection boxes
Cons
- Alloy rather than solid brass
- Thinner than the 3 mm brass options
weparmeety is best for a 24-piece gold-tone alloy batch with a brushed finish. Each blank is 40 mm in diameter and 2 mm thick, so it is lighter and thinner than the 3 mm brass options.
The coins have threaded edges and a non-electroplated brushed finish. The blank surface is intended for laser engraving of patterns or words, and each coin comes with an individual transparent acrylic protection box.
This set suits event favors, matching gifts and practice runs where you need many pieces. The 24-piece count gives you more room for test marks and design changes than the smaller brass packs.
Alloy blanks and solid brass blanks should not be treated as interchangeable. If the metal or coating affects your laser settings, start with a spare coin and use the machine guidance for that material.
Pick weparmeety when quantity and a brushed gold-tone look matter most. Choose a solid brass set instead if the metal itself is central to the finished piece.
How to choose coin blanks for laser engraving
The best laser engraving coin blanks match your design, machine and desired finish. Start with the material, then check thickness, surface treatment, edge style and pack count.
For larger display pieces, compare blank plaques for laser engraving.
Should you choose brass or alloy coin blanks?
Choose solid brass when you want a brass material and a thicker 3 mm blank. Rainteam, Funria and ZDQCB are the solid brass options here, while Xdkyzrs is described as pure brass at 2.2 mm thick.
Choose alloy when you want a larger pack or a plated appearance. ALRALLI uses a zinc alloy core with silver plating, and weparmeety uses alloy with a non-electroplated brushed finish.
Finish and metal are separate decisions. A silver-plated or gold-tone coin may look different from an uncoated brass coin, but the coating can affect how the laser mark appears.
For more metal-specific guidance, read Can You Laser Engrave Gold? and Can You Laser Engrave Silver?.
Does coin thickness matter?
Yes. A 3 mm coin feels thicker and may be easier to handle during a project, while a 2 mm coin can suit a larger batch of smaller keepsakes.
Rainteam, Funria and ZDQCB are 3 mm thick. Xdkyzrs is 2.2 mm thick, while ALRALLI and weparmeety are 2 mm thick.
Use the stated thickness when setting up your fixture and focus. A coin that sits unevenly can make alignment and marking less consistent, especially when you are engraving a small logo or fine text.
Measure the blank with your own setup in mind. Leave enough room for the coin to sit flat and for the laser path to stay clear of clamps or other hardware.
What surface should you engrave?
A clean, flat surface is the best starting point for a coin design. Remove dust and residue, then follow the material and laser instructions for the blank you selected.
Rainteam has a protective coating that should be removed before engraving for better results. Other products here have brushed, sandblasted, silver-plated or other stated surface treatments.
Test your design on a spare blank when possible. Use the test to check focus, alignment, contrast and the amount of detail your chosen finish can show.
Avoid assuming that two coins with the same diameter will mark in exactly the same way. Material, coating and surface texture can change the result.
Do threaded edges affect the design?
Threaded or gear-edged coins add a border around the main face. Funria and weparmeety use threaded edges, while ZDQCB has a gear-edged design.
That edge can make a challenge coin feel more decorative, but it also affects how much visual space remains for a logo or text. Keep important details inside the flat center area.
Plain or less decorative edges may suit a clean emblem, while a detailed edge can frame a short message. Choose the edge based on the finished look, not only the pack size.
How many blanks should you buy?
Buy 10 or 12 blanks for a small gift run, 20 for a medium batch, and 24 when you need matching pieces or extra room for testing. The right count depends on the number of finished coins and how many practice marks you need.
Rainteam and Xdkyzrs include 10 coins. Funria includes 12, ZDQCB includes 20, and ALRALLI and weparmeety include 24.
A larger pack can lower the risk of running out after a setup error, but it also commits you to one material and finish. Make sure the blank suits your design before choosing quantity.
How to prepare coin blanks for engraving
Preparation starts with a clean, level surface and a design sized for the usable face.
Secure the coin so it cannot shift, and keep your alignment reference consistent.
Start by checking the blank for dust, residue or marks from handling.
Wipe it with a clean, dry cloth and let it sit flat before you measure it.
Look at the stated diameter and thickness so your fixture matches the coin.
A coin that moves during marking can blur fine detail and shift the design.
Use a simple jig or a marked reference point to repeat the same position each time.
That helps with logos, centered text and any two-sided work.
Remove any protective coating that the product instructions identify before engraving.
Rainteam says removing its coating before engraving can lead to better results.
For plated or coated blanks, confirm your laser's suitable material settings before starting a full batch.
Coated finishes may mark differently from raw brass or alloy, so a test is wise.
Set your design inside the flat center area of the coin.
Keep important details away from threaded or gear-edged borders where the surface changes.
Measure the text height and line spacing on screen before you engrave.
Small lettering needs clear contrast to stay readable on metal.
Use a spare coin for a test mark.
Check the text size, logo position, contrast and edge clearance before engraving the pieces you plan to give away.
Run the same test at the focus height you plan to use for the batch.
Small changes in height can affect how clean the lines look.
If the mark is too light or too deep, adjust one setting at a time and test again.
Note the settings that work so you can repeat them for the next coin.
Engrave the final pieces one at a time and check the first result before continuing.
That habit can save an entire batch from the same alignment error.
After engraving, remove residue using a method suitable for the metal and finish.
Use a soft cloth and handle the coin by the edges where possible.
Avoid harsh scrubbing that could scratch the surface or dull the mark.
Let the coin dry fully if you clean it with a damp cloth.
Store completed coins in their acrylic or plastic cases when available to reduce scratches during handling.
Keep finished and unfinished blanks separate so you do not mix test pieces with gifts.
Label the case if you are making several designs for different recipients.
That small step helps when you return to a batch later.
If you also make drinkware, compare these blanks with the Top 7 Best Blank Tumblers For Laser Engraving.
For wood projects, see Best Engraving Wood Blanks.
Which laser engraving coin blanks should you choose?
Choose Rainteam for a small set of thick solid brass keepsakes, Funria for double-sided engraving with threaded edges, and Xdkyzrs for a smaller pure brass batch with a sandblasted surface.
Pick ZDQCB when you need 20 solid brass blanks and like a gear-edged design.
Choose ALRALLI for 24 silver-plated alloy coins or weparmeety for 24 brushed alloy blanks with a gold-tone look.
Start with the metal you want in the finished piece.
Solid brass options give a thicker, heavier feel that suits keepsakes and challenge coins.
Alloy options help when you need more pieces for one project or a plated look.
Then consider thickness for daily handling and setup.
A 3 mm blank sits firmly in a fixture and feels substantial in hand.
A 2 mm blank can suit a larger batch of smaller keepsakes and takes less space to store.
Xdkyzrs sits between those choices at 2.2 mm thick.
Next, look at the edge style.
A threaded or gear edge frames the design and adds a decorative border.
That style works well for badges, tokens and event coins.
A plain look may suit a clean emblem or a simple text design better.
Surface finish is the next check.
A sandblasted surface gives a smooth, uniform base for detailed work.
A brushed finish softens the shine and suits a warm, understated look.
Silver plating gives a bright finish that looks different from brass.
Check whether the coating needs to be removed before engraving.
That step can change the quality and contrast of the mark.
Then match the pack count to your batch size.
Ten or twelve blanks fit a small gift run and leave room for a test piece.
Twenty blanks suit a medium batch or several design versions.
Twenty-four blanks give the most room for matching gifts, favors and practice marks.
Keep in mind that a larger pack commits you to one material and finish.
Make sure that finish suits the design before you buy in bulk.
The best laser engraving coin blanks are the ones that match your intended finish, material preference, design size and batch count.
Test the surface first, then engrave the final pieces once your alignment and settings are consistent.
Our top 3 picks at a glance
-
1
Best for premium brass keepsakesRainteam Blank Brass Challenge Coin Laser Engraving
9.7/10 our score
See it on Amazon -
2
-
3
Best for beginner craft batchesXdkyzrs 10PCS 40mm Blank Brass Coins
9.3/10 our score
See it on Amazon
Frequently asked questions
What are the best coin blanks for laser engraving?
Rainteam is the best all-around choice for 40 mm solid brass blanks with 3 mm thickness and individual acrylic protection boxes. Funria is better for double-sided designs, ZDQCB suits larger solid brass batches, and ALRALLI or weparmeety fit projects that need 24 alloy blanks.
Choose by metal, coating, thickness, edge style and pack count.
Can you laser engrave brass coin blanks?
Yes, brass coin blanks can be used for laser engraving when your machine and settings suit the material. Rainteam, Funria and ZDQCB are solid brass options, while Xdkyzrs is described as pure brass.
Remove protective coatings when instructed, secure the coin flat and test on a spare blank before engraving a batch.
Are alloy coin blanks the same as brass blanks?
No. Alloy coin blanks are not the same as solid brass blanks.
ALRALLI uses a zinc alloy core with silver plating, while weparmeety uses alloy with a brushed finish.
Alloy may suit larger batches or a plated look, but choose solid brass when the brass material and thicker feel matter to your project.
What size are these laser engraving coin blanks?
All 6 picks in this guide are about 40 mm in diameter. Thickness varies from 2 mm to 3 mm: ALRALLI and weparmeety are 2 mm, Xdkyzrs is 2.2 mm, and Rainteam, Funria and ZDQCB are 3 mm.
Check the thickness when setting focus and securing the coin.
Can both sides of a coin blank be engraved?
Funria is specifically described as supporting engraving on both sides, and ALRALLI has smooth surfaces on both sides. Other blanks may also support two-sided work, but you should test alignment and confirm the finish before making a batch.
Use a repeatable fixture and a clear reference direction for the second face.
How should you prepare a coin blank before engraving?
Clean the surface, remove any coating that needs to come off, and secure the coin flat. Rainteam states that removing its protective coating before engraving can improve results.
Test the focus, alignment and design on a spare blank first.
Keep finished coins in their protective cases when possible.
About this guide: Our look at laser engraving coin blanks draws on maker specs, materials and what owners report. See how we research.



