Best picks

Best 50W CO2 Laser Tubes: Top 6 Picks (November 2026)

Updated on · By the Handyloom team

The best 50W CO2 laser tubes include the MCWlaser Set of 2 High Voltage Wire for two connection points, the Cloudray 60W Co2 Laser Power Supply 110V for a compatible 50W tube setup, and the Mssoomm High Voltage Wire Protective Positive for positive and negative connectors.

On this page (3 sections)
  1. Which 50W CO2 laser tubes and parts stand out?
  2. What should you check before buying a replacement tube?
  3. Which 50W CO2 laser tube should you choose?

The TEN-HIGH 50W CO2 Laser Tube is the direct 50W tube choice here, with an 800 mm length and 50 mm diameter. The other picks are wiring connectors, a power supply or tubes with different power ratings, so check their role and fit before buying.

A replacement CO2 laser tube must match more than the wattage printed on it. Confirm length, diameter, mounting space, wiring and your machine’s required power before placing an order.

For broader options, compare our guide to the best CO2 laser tube. If you're choosing a complete machine instead of a replacement part, see our best 50W laser engraver and best CO2 laser engraver guides.

Our picks at a glance

  1. 1 MCWlaser Set of 2 High Voltage Wire
    Best for two connection points

    MCWlaser Set of 2 High Voltage Wire

    9.6/10 our score

    See it on Amazon
  2. 2 Cloudray 60W Co2 Laser Power Supply 110V
    Best for a compatible 50W tube setup

    Cloudray 60W Co2 Laser Power Supply 110V

    9.5/10 our score

    See it on Amazon
  3. 3 Mssoomm High Voltage Wire Protective Positive
    Best for positive and negative connectors

    Mssoomm High Voltage Wire Protective Positive

    9.4/10 our score

    See it on Amazon
  1. 4TEN-HIGH 50W CO2 Laser Tube 800mm D50mm

    TEN-HIGH 50W CO2 Laser Tube 800mm D50mm

    Best for a direct 50W replacement
    Check it
  2. 5Cloudray RECI CO2 Laser Tube W2 CO2

    Cloudray RECI CO2 Laser Tube W2 CO2

    Best for a higher-power machine
    Check it
  3. 6Cloudray 40W Laser Tube 720mm Dia.50mm

    Cloudray 40W Laser Tube 720mm Dia.50mm

    Best for a lower-power, shorter fit
    Check it

Which 50W CO2 laser tubes and parts stand out?

The TEN-HIGH is the only tube in this group rated 50W. The other options can help with tube connections or serve machines built for different power and size requirements.

We compared the stated power, dimensions, connections and intended role of each item.

ProductBest forPackCompatible power suppliesConnector typeOur score
MCWlaser Set of 2 High Voltage Wiretwo connection points2 connectors40W to 150WPlug9.6
Cloudray 60W Co2 Laser Power Supply 110Va compatible 50W tube setup9.5
Mssoomm High Voltage Wire Protective Positivepositive and negative connectors40W to 200W9.4
TEN-HIGH 50W CO2 Laser Tube 800mm D50mma direct 50W replacement9.3
Cloudray RECI CO2 Laser Tube W2 CO2a higher-power machine9.0
Cloudray 40W Laser Tube 720mm Dia.50mma lower-power, shorter fit8.6

How does the TEN-HIGH 50W CO2 laser tube fit a machine?

The TEN-HIGH is the most direct match for someone replacing a 50W tube, as long as the machine accepts an 800 mm tube with a 50 mm diameter. It includes one tube and has its high and low voltage wires preconnected.

4

TEN-HIGH 50W CO2 Laser Tube 800mm D50mm: Best for a direct 50W replacement

TEN-HIGH 50W CO2 Laser Tube 800mm D50mm, 50W CO2 laser tubes
9.3/10Our score
  • 50W power
  • 800 mm length
  • 50 mm diameter
  • Wires preconnected

This glass tube is rated 50W and measures 800 mm by 50 mm in diameter. Preconnected high and low voltage wires may suit buyers seeking those connections already attached.

See it on Amazon

Pros

  • Rated 50W
  • Preconnected high and low voltage wires

Cons

  • Confirm tube clearance and mounting before ordering
  • Check whether its connections match your machine

This tube’s 800 mm length and 50 mm diameter are the first compatibility checks to make. Measure the installed tube and available clearance, including the space needed for connections and any machine hardware around the tube.

TEN-HIGH describes the tube as intended for laser cutters and engraving machines. Its product information also names acrylic, cloth, leather, bamboo and wood as materials for carving or cutting.

The preconnected high and low voltage wires may simplify matching the connection layout, but they do not confirm compatibility with every machine. Check the wiring diagram and the tube’s required cooling and mounting setup before installation.

Choose this pick when your machine calls for a 50W tube of these dimensions. If your current tube is a different length or diameter, compare those measurements before treating this as a replacement.

TEN-HIGH 50W CO2 Laser Tube 800mm D50mmCheck it on Amazon

Which connection parts suit a 50W CO2 laser?

The MCWlaser and Mssoomm options are connection parts, not tubes. Both state compatibility with power supplies that include 50W, so choose between them by the connector pieces your setup needs.

1

MCWlaser Set of 2 High Voltage Wire: Best for two connection points

MCWlaser Set of 2 High Voltage Wire, 50W CO2 laser tubes
9.6/10Our score
  • Set of 2 connectors
  • For 40W to 150W power supplies
  • Connector type: plug

A two-piece connector set for connecting a CO2 power supply and laser tube. Its stated power supply range includes 50W systems.

See it on Amazon

Pros

  • Two connectors in one set
  • Stated compatibility includes 50W power supplies

Cons

  • Does not include a laser tube
  • Confirm connector fit for your setup

The MCWlaser set contains 2 high-voltage wire connectors for the connection between a CO2 power supply and tube. Its stated compatibility range runs from 40W to 150W power supplies, including 50W.

This option makes sense when you need a pair of connectors and your setup matches the plug style. It does not replace a worn tube, and the stated wattage range alone cannot confirm that the connector fits your exact wires.

Before buying, compare the connector ends and wiring layout with the parts already in your machine. Follow your machine’s safety instructions when working around laser power connections.

MCWlaser Set of 2 High Voltage WireCheck it on Amazon
3

Mssoomm High Voltage Wire Protective Positive: Best for positive and negative connectors

Mssoomm High Voltage Wire Protective Positive, 50W CO2 laser tubes
9.4/10Our score
  • One pair of connector heads
  • Positive and negative heads
  • For 40W to 200W power supplies

The pair includes positive and negative connector heads for a CO2 power supply and tube. Its stated compatibility range covers 50W systems.

See it on Amazon

Pros

  • Includes both positive and negative heads
  • Stated range includes 50W power supplies

Cons

  • Does not include a laser tube
  • Check polarity and fit for your machine

Mssoomm includes one pair of positive and negative connector heads, plus a metal terminal with heat shrink tube. Its stated compatibility range includes 50W CO2 power supplies.

The positive head connects with the laser tube, while the negative head connects with the laser power supply. Confirm that this arrangement matches your wiring and that the connectors suit your machine before fitting them.

Choose this set when you need both protective connector heads. It is a wiring accessory, so pair it with a compatible tube and power supply rather than treating it as a tube replacement.

Mssoomm High Voltage Wire Protective PositiveCheck it on Amazon

Is the Cloudray 60W power supply a 50W tube replacement?

No. The Cloudray item is a 60W power supply with 110V input, not a laser tube, and it needs to match the tube and machine’s wiring.

2

Cloudray 60W Co2 Laser Power Supply 110V: Best for a compatible 50W tube setup

Cloudray 60W Co2 Laser Power Supply 110V, 50W CO2 laser tubes
9.5/10Our score
  • 110V input
  • 60W power supply
  • Maker describes compatibility with 55W and 60W tubes

This is a power supply rather than a tube. Confirm that its rating and wiring match your tube and machine before considering it for a replacement setup.

See it on Amazon

Pros

  • 110V input
  • External LCD current display connection

Cons

  • Rated 60W, so it is not a 50W tube
  • Power supply and tube ratings must be matched

Cloudray describes this supply as compatible with 55W and 60W tubes from various manufacturers. Its model is MYJG-60W 110V, and it has a connection for an external LCD current display.

That makes it a possible consideration when replacing a compatible power supply, not a direct pick for replacing a 50W tube. The product information says power supply wattage needs to be consistent with tube power, and it notes that interfaces can differ between supplies.

Check the power supply’s wiring diagram and your machine’s required ratings before choosing it. If you need a 50W tube, compare the TEN-HIGH dimensions and specifications instead.

Cloudray 60W Co2 Laser Power Supply 110VCheck it on Amazon

What if a different tube power or length is needed?

The Cloudray RECI W2 and CR35 tubes have different power ratings from 50W, so they are relevant only when your machine is designed for their specifications. Compare the dimensions and machine requirements before considering either as a replacement.

5

Cloudray RECI CO2 Laser Tube W2 CO2: Best for a higher-power machine

Cloudray RECI CO2 Laser Tube W2 CO2, 50W CO2 laser tubes
9.0/10Our score
  • Rated 90W to 100W
  • 1240 mm length
  • 80 mm diameter

This RECI W2 tube is rated well above 50W and is much longer and wider than the direct pick. Consider it only for a machine designed for those dimensions and power.

See it on Amazon

Pros

  • Dimensions and rated power are specified
  • Removable lens cover

Cons

  • Not a 50W tube
  • Requires substantially more installation space

The Cloudray RECI W2 is rated 90W to 100W, with a listed length of 1240 mm and diameter of 80 mm. Those dimensions and power make it a substantially different choice from the 50W TEN-HIGH.

Cloudray describes a removable lens cover that can be removed for cleaning. This tube may suit a machine built for its rating and size, but it is not a like-for-like 50W replacement.

If your machine needs a 50W tube, choose by its specified power and measured installation space. For a higher-power machine, compare this option with our best 60W CO2 laser tubes and best 80W CO2 laser tubes guides.

Cloudray RECI CO2 Laser Tube W2 CO2Check it on Amazon
6

Cloudray 40W Laser Tube 720mm Dia.50mm: Best for a lower-power, shorter fit

Cloudray 40W Laser Tube 720mm Dia.50mm, 50W CO2 laser tubes
8.6/10Our score
  • 40W rated power, maximum 45W
  • 720 mm length
  • 50 mm diameter
  • High and low voltage ports preconnected

This shorter 40W tube may fit a different machine than the 50W pick, but it is not a like-for-like 50W replacement. Check the machine’s required power and dimensions.

See it on Amazon

Pros

  • Shorter 720 mm length
  • Preconnected high and low voltage ports

Cons

  • Rated 40W, maximum 45W
  • Tube holder is not included

The Cloudray CR35 is a 40W tube with a maximum of 45W, measuring 720 mm long and 50 mm in diameter. Its shorter length may fit machines with less tube space, but its power rating differs from the 50W TEN-HIGH.

Cloudray says the tube’s high and low voltage ports are preconnected, and the high-voltage connector is included. The tube holder is not included, so check whether you need a separate holder for your machine.

Use this option only if your machine’s required tube power and dimensions match. Do not assume that a shared 50 mm diameter makes it a suitable substitute for a 50W tube.

Cloudray 40W Laser Tube 720mm Dia.50mmCheck it on Amazon

What should you check before buying a replacement tube?

Match the replacement to your machine’s required power, tube dimensions and connection layout. Confirm those details against the current tube and machine documentation before ordering.

How do length and diameter affect fit?

Tube length and diameter determine whether the tube fits the machine’s space and mounts. The direct 50W option here is 800 mm long and 50 mm wide, while the other tubes have different dimensions.

Measure the full available space and check the mount positions. Leave room for the wiring and connections, and verify any holder requirements.

Does matching wattage guarantee compatibility?

No. A tube with the same power rating can still have different dimensions, wire connections or mounting needs.

Compare the complete setup, including the power supply and cooling arrangement.

Use the power rating required by your machine. If you're unsure how the tube connects, follow our guide to safely replacing a CO2 laser tube and the machine manufacturer’s instructions.

Are preconnected wires enough to make installation easy?

Preconnected wires describe the tube’s connection state, but they do not mean the wiring matches your machine. The TEN-HIGH and Cloudray 40W tube both describe preconnected high and low voltage connections.

Check the machine’s wiring diagram and connection types before installation. High-voltage laser components require careful handling, so use qualified service help if you cannot confirm a safe match.

Which 50W CO2 laser tube should you choose?

Choose the TEN-HIGH if your machine calls for a 50W tube measuring 800 mm by 50 mm. Pick MCWlaser or Mssoomm when you need compatible wiring connectors, and consider the Cloudray supply only when your setup requires a matching 60W power supply.

If your machine needs a different tube rating, start with its required specifications and compare the relevant CO2 tube options by power. Check dimensions and wiring before ordering any replacement.

Our top 3 picks at a glance

  1. 1 MCWlaser Set of 2 High Voltage Wire
    Best for two connection points

    MCWlaser Set of 2 High Voltage Wire

    9.6/10 our score

    See it on Amazon
  2. 2 Cloudray 60W Co2 Laser Power Supply 110V
    Best for a compatible 50W tube setup

    Cloudray 60W Co2 Laser Power Supply 110V

    9.5/10 our score

    See it on Amazon
  3. 3 Mssoomm High Voltage Wire Protective Positive
    Best for positive and negative connectors

    Mssoomm High Voltage Wire Protective Positive

    9.4/10 our score

    See it on Amazon

Frequently asked questions

Is the TEN-HIGH tube a 50W CO2 laser tube?

Yes. TEN-HIGH identifies this tube as 50W, with an 800 mm length and 50 mm diameter.

Those dimensions alone do not confirm compatibility.

Compare the tube’s fit, mounts, cooling arrangement and electrical connections with your machine before ordering.

Can I replace a 50W tube with a 60W power supply?

A power supply is a separate component from the laser tube, and its rating must match the tube and machine. The Cloudray option here is a 60W supply for 110V input, so confirm its wiring and compatibility with your exact setup before use.

For replacement steps, see our CO2 laser tube replacement guide.

What measurements should I check before buying a replacement tube?

Measure the tube’s full length and outer diameter, then compare them with the available space and mount positions in your machine. Also check the required tube power, wire connections and cooling setup.

A similar wattage does not guarantee that a tube will fit or connect correctly.

Are 40W and 50W CO2 laser tubes interchangeable?

Not automatically. The Cloudray tube in this roundup is rated 40W, with a maximum of 45W, while the TEN-HIGH tube is rated 50W.

Use the power rating specified for your machine and confirm physical fit and electrical compatibility before replacing a tube.