Best 80W CO2 Laser Tubes: Top 7 Picks (November 2026)
The best 80W CO2 laser tubes include the TEN-HIGH 40W CO2 Laser Tube 700mm D50mm for compact laser systems, the MCWlaser Set of 2 High Voltage Wire for tube wiring repairs, and the Cloudray 60W Co2 Laser Power Supply 110V for 60W support systems.
On this page (10 sections)
- Which 80W CO2 laser tube is the best match?
- 1. Cloudray RECI CO2 Laser Tube W2 CO2: Best for most 80W replacements
- 2. Cloudray 90W CO2 Laser Tube 90W-100W: Best for larger tube upgrades
- 3. Cloudray 100 Watt Laser Power Supply 110V: Best for 80W to 100W power matching
- 4. TEN-HIGH 40W CO2 Laser Tube 700mm D50mm: Best for compact laser systems
- 5. MCWlaser Set of 2 High Voltage Wire: Best for tube wiring repairs
- 6. Mssoomm High Voltage Wire Protective Positive: Best for protected connections
- 7. Cloudray 60W Co2 Laser Power Supply 110V: Best for 60W support systems
- What should you check before buying an 80W CO2 laser tube?
- Is an 80W CO2 laser tube right for your machine?
The best 80W CO2 laser tube for most compatible machines is the Cloudray RECI W2, because its stated range covers 80W to 100W and its 1240 mm by 80 mm body is clearly defined. Choose the Cloudray 100W power supply when the electrical system also needs replacement, or use the smaller TEN-HIGH tube for a 40W machine.
An 80W CO2 tube is not selected by wattage alone. Length, diameter, tube holders, water connections, power-supply range, current settings and high-voltage wiring all need to match your laser system.
If you are comparing nearby sizes, see our guides to the best 50W CO2 laser tubes and best 60W CO2 laser tubes. Our broader guide to the best CO2 laser tubes covers replacement choices across several power ranges.
Our picks at a glance
-
1
Best for compact laser systemsTEN-HIGH 40W CO2 Laser Tube 700mm D50mm
9.7/10 our score
See it on Amazon -
2
-
3
Best for 60W support systemsCloudray 60W Co2 Laser Power Supply 110V
9.5/10 our score
See it on Amazon
- 4
Check itMssoomm High Voltage Wire Protective Positive
Best for protected connections - 5
Check itCloudray RECI CO2 Laser Tube W2 CO2
Best for most 80W replacements - 6
Check itCloudray 90W CO2 Laser Tube 90W-100W
Best for larger tube upgrades - 7
Check itCloudray 100 Watt Laser Power Supply 110V
Best for 80W to 100W power matching
Which 80W CO2 laser tube is the best match?
The Cloudray RECI W2 is the best direct match for an 80W replacement search, while the Cloudray CR90 is better for a machine designed around a 90W to 100W tube. The TEN-HIGH model is a compact 40W option, not an 80W replacement.
We compared the stated power ranges, dimensions, connection details and support components. Our score weighs specs, features and buyer feedback against what you're shopping for.
The highest-scoring products are not all laser tubes. For more setup additions, see our CO2 laser engraver accessories.
The MCWlaser and Mssoomm options solve high-voltage connection problems, while the Cloudray power supplies help when the tube and supply need to be matched as a system.
| Product | Best for | Power | Length | Diameter | Our score |
|---|---|---|---|---|---|
| TEN-HIGH 40W CO2 Laser Tube 700mm D50mm | compact laser systems | 40W | 700 mm | 50 mm | 9.7 |
| MCWlaser Set of 2 High Voltage Wire | tube wiring repairs | 9.6 | |||
| Cloudray 60W Co2 Laser Power Supply 110V | 60W support systems | 9.5 | |||
| Mssoomm High Voltage Wire Protective Positive | protected connections | 9.4 | |||
| Cloudray RECI CO2 Laser Tube W2 CO2 | most 80W replacements | 1240 mm | 80 mm | 9.0 | |
| Cloudray 90W CO2 Laser Tube 90W-100W | larger tube upgrades | 90W, 100W maximum | 1250 mm | 8.5 | |
| Cloudray 100 Watt Laser Power Supply 110V | 80W to 100W power matching | 8.3 |
1. Cloudray RECI CO2 Laser Tube W2 CO2: Best for most 80W replacements
Cloudray RECI CO2 Laser Tube W2 CO2: Best for most 80W replacements
- Rated 90W to 100W
- Power range of 80W to 100W
- 1240 mm length
- 80 mm diameter
Cloudray's RECI W2 is the closest match for shoppers seeking a tube that explicitly covers an 80W system. It has a 1240 mm length, 80 mm diameter and a removable lens cover.
Pros
- Explicit 80W to 100W range
- Clear length and diameter
- Removable lens cover
- 18-month warranty
Cons
- Larger 80 mm diameter
- Higher rated range may not match every machine
Cloudray's RECI W2 is the clearest fit for an 80W CO2 laser tube search. Its stated power range is 80W to 100W, while the product name and model information identify it as a 90W to 100W tube.
The tube measures 1240 mm long and 80 mm in diameter. Those dimensions are the first checks to make against your old tube, because a physically larger tube may not fit the cabinet or existing holders.
Cloudray also describes a removable laser lens cover. That cover can be removed for cleaning, which keeps the output lens protected when the machine is not running.
The rated current is 25 mA. Match the tube with a suitable power supply and follow the machine's wiring and cooling requirements.
The tube includes an 18-month warranty according to the product information.
Choose this model when your machine has room for a 1240 mm by 80 mm tube and your electrical system supports the stated range. After installation, check beam alignment with a high-power CO2 laser alignment target.
If your machine is shorter or narrower, a smaller tube is a safer starting point.
2. Cloudray 90W CO2 Laser Tube 90W-100W: Best for larger tube upgrades
Cloudray 90W CO2 Laser Tube 90W-100W: Best for larger tube upgrades
- 90W rated power
- 100W maximum
- 1250 mm length
- 80 mm outer diameter
This Cloudray CR90 is suited to machines built for a 90W to 100W tube, or an 80W system with confirmed space and electrical compatibility. Its 1250 mm body needs careful measurement.
Pros
- Pre-connected high-voltage and low-voltage ends
- Nano gold coating
- 80 mm diameter
Cons
- Long 1250 mm body
- Tube holder is not included
Cloudray's CR90 is a 90W tube with a 100W maximum, so it suits a machine designed for that range more directly than a standard 80W replacement. It can be considered for an 80W system only after confirming the machine's electrical and physical limits.
The glass body is 1250 mm long with an 80 mm outer diameter. Cloudray specifically advises checking the available installation space, including room around the tube.
The high-voltage end and low-voltage port are pre-connected, and a high-voltage connector is included. That can reduce the number of wiring steps during installation, but the existing machine connections still need to match.
Cloudray describes a nano gold coating, TEM00 output mode and a glass-metal sealing process. These are product features, not a guarantee that every machine will produce the same cutting result.
The tube holder is not included. Plan for a compatible holder if your existing one does not fit the 80 mm diameter.
3. Cloudray 100 Watt Laser Power Supply 110V: Best for 80W to 100W power matching
Cloudray 100 Watt Laser Power Supply 110V: Best for 80W to 100W power matching
- 100W maximum power
- 110V input
- External LCD ammeter
- TTL start and stop control
This Cloudray power supply is the most direct electrical match among these accessories for an 80W to 100W tube. Confirm the wiring diagram and machine layout before replacing an existing supply.
Pros
- Designed for 80W to 100W tubes
- 110V model
- External LCD current display
- Open-circuit protection
Cons
- Larger 100W supply
- Wiring and mounting must match your machine
The Cloudray 100W power supply is the strongest accessory match for an 80W tube because it is described for 80W to 100W laser tubes. It uses 110V input and has a maximum power rating of 100W.
The unit includes TTL start and stop control, output open-circuit protection, signal indicators and a button for manually checking laser output. An external LCD ammeter connection lets you monitor processing current and adjust it through the supply's controls.
This is a replacement power supply, not a tube. Before ordering, compare the old supply's terminals, mounting space, wiring and control signals.
Cloudray also notes that different power-supply interfaces may vary, so use the correct wiring diagram.
The unit has an ATX form factor and measures 12.6 x 7.87 x 5.91 inches. Leave room for its enclosure and cable routing inside the machine.
Choose it when your 80W to 100W tube needs a compatible 110V supply. It is less suitable when your machine uses another input voltage or a different connection layout.
4. TEN-HIGH 40W CO2 Laser Tube 700mm D50mm: Best for compact laser systems
TEN-HIGH 40W CO2 Laser Tube 700mm D50mm: Best for compact laser systems
- 40W power
- 700 mm length
- 50 mm diameter
- Pre-connected wires
This compact TEN-HIGH tube is a useful replacement when your machine uses a 40W tube and has limited installation space. Its high-voltage and low-voltage connections are pre-connected.
Pros
- Compact 700 mm length
- 50 mm diameter
- Pre-connected wires
- 3-month warranty except man-made damage
Cons
- Rated at 40W, not 80W
- Only one tube included
The TEN-HIGH tube is the best compact option in this group, but it is rated at 40W, not 80W. It fits a different class of laser system and should be considered only when the replacement tube, power supply and machine are built for 40W operation.
Its body is 700 mm long and 50 mm in diameter. That smaller size can help in a compact cabinet, but measure the original tube and mounting points before selecting it.
The high-voltage end and low-voltage port are pre-connected. TEN-HIGH also describes a nano gold catalyst coating, TEM00 output mode and glass-metal sealing technology.
The tube is intended for laser cutting and engraving applications involving materials such as acrylic, cloth, leather, bamboo and wood. Those material examples do not tell you what settings your own machine will need.
This tube includes one tube and a stated 3-month warranty except for man-made damage. Choose it when you need a 40W replacement with a 700 mm by 50 mm profile, not when you need an 80W tube.
5. MCWlaser Set of 2 High Voltage Wire: Best for tube wiring repairs
MCWlaser Set of 2 High Voltage Wire: Best for tube wiring repairs
- Set of 2 connectors
- Supports 40W to 150W systems
- Locking design
- Insulation shell
These MCWlaser connectors help replace damaged connections between a CO2 power supply and laser tube. The stated compatibility range includes 80W systems.
Pros
- Two pieces included
- Broad power-supply compatibility
- Secure locking design
Cons
- Connectors only, not a laser tube
- Wiring fit still needs checking
The MCWlaser set helps when the tube itself is usable but the connection between the CO2 power supply and tube needs repair. It includes 2 high-voltage wire connectors and supports power supplies from 40W through 150W, which includes 80W systems.
The connectors use a plug design with a stainless steel exterior finish. MCWlaser describes an insulation shell, locking design and high-conductivity terminals for stable connection and voltage isolation.
Check the connector shape and cable arrangement on your machine before ordering. A broad power range does not guarantee that every terminal or wire length will fit your specific laser.
This set is not a replacement laser tube or complete power-supply cable. It is a connection component for a repair or rewiring job.
Choose it when you need two matching connector pieces for an 80W system. If you need positive and negative protective heads with a metal terminal, compare the Mssoomm option below.
6. Mssoomm High Voltage Wire Protective Positive: Best for protected connections
Mssoomm High Voltage Wire Protective Positive: Best for protected connections
- Positive and negative connector heads
- Metal terminal
- Heat-shrink tube
- Supports 40W to 200W systems
This Mssoomm connector set covers the power range used by many 80W CO2 systems. The positive head connects to the tube and the negative head connects to the power supply.
Pros
- Includes positive and negative heads
- Wide stated compatibility
- Heat-shrink tube included
Cons
- Not a complete high-voltage cable
- Connector orientation must be checked
The Mssoomm set is useful when an 80W laser needs replacement positive and negative connector heads. It includes 1 pair of protective connector heads, 1 metal terminal and heat-shrink tube.
The positive head connects to the laser tube, while the negative head connects to the power supply. Mssoomm describes compatibility from 40W through 200W, so the stated range includes many 80W configurations.
The connector heads are designed to lock tightly and keep the connection secure. They are intended to replace improvised tape-based insulation, but installation still requires careful high-voltage wiring practices.
The product model is MS-JYX-GMZ. Mssoomm also says high-voltage wire can be supplied in different lengths through the brand, so confirm the length needed for your routing.
Choose this option when you want a protected connector-head set rather than a complete tube. Match the polarity and terminal arrangement before connecting anything.
7. Cloudray 60W Co2 Laser Power Supply 110V: Best for 60W support systems
Cloudray 60W Co2 Laser Power Supply 110V: Best for 60W support systems
- 60W maximum power
- 110V input
- External LCD ammeter connection
- TTL start and stop control
This Cloudray supply is for 55W and 60W tubes, so it is a support component rather than a direct 80W match. It includes protection indicators and an external current display connection.
Pros
- 110V model
- External LCD current display connection
- Open-circuit protection
Cons
- Not rated for an 80W tube
- Wiring interfaces can vary
The Cloudray 60W power supply is included as a comparison accessory because it supports 55W and 60W tubes, not because it is a direct 80W power supply. It can help readers whose diagnosis shows that their machine is a smaller 60W system.
The unit uses 110V input and has a 60W maximum power rating. It includes TTL start and stop control, output open-circuit protection, signal indicators and an external LCD current display connection.
Cloudray identifies the model as MYJG-60W 110V. The supply measures 10.63 x 5.91 x 7.87 inches, so compare its enclosure with your existing mounting space.
Cloudray also notes that its power must be consistent with the laser tube's power. Do not use a 60W supply as an assumed match for an 80W tube.
Choose this model when your machine is built around a 55W or 60W tube and the 110V wiring matches. For an 80W to 100W tube, the Cloudray 100W supply is the more relevant option.
What should you check before buying an 80W CO2 laser tube?
Check the tube length, diameter, power range, current, holder size and power-supply compatibility before choosing an 80W replacement. A tube that matches the wattage but not the cabinet or electrical system can still be the wrong part.
Measure the old tube and machine space
Measure the glass body length and outer diameter. Include the space needed for tube holders, water lines, wire bends and safe clearance around the tube.
The Cloudray W2 is 1240 mm long and 80 mm in diameter. The CR90 is slightly longer at 1250 mm but has the same 80 mm outer diameter.
Match the power supply to the tube
The power supply should be suitable for the tube's power range and current needs. The Cloudray 100W supply is described for 80W to 100W tubes, while the Cloudray 60W unit is described for 55W and 60W tubes.
Check input voltage as well. Both Cloudray supplies in this comparison are 110V models, which may not suit every machine or workshop circuit.
Check the high-voltage connections
Look at the old tube's positive and negative connection points before ordering connectors. MCWlaser offers a 2-piece connection set, while Mssoomm includes positive and negative protective heads with a metal terminal and heat-shrink tube.
High-voltage laser wiring can be dangerous. Disconnect power, follow the machine's service instructions and use a qualified technician when you are not sure the supply or tube is fully discharged.
Confirm cooling and mounting needs
A CO2 tube needs the correct physical support and cooling arrangement for the machine. Compare holder diameter, water-line position and available cabinet length before removing the old tube.
Cloudray's CR90 does not include a tube holder. The W2 and CR90 both use an 80 mm diameter, but that does not guarantee that your existing holder will fit.
For a step-by-step safety overview, read How to Safely Replace a CO2 Laser Tube: Pro Guide. For a complete machine comparison, see our guides to the Best 80W Laser Engraver and Best CO2 Laser Engraver.
Is an 80W CO2 laser tube right for your machine?
An 80W tube is right when your machine's cabinet, holders, cooling system and power supply are all built for that range. The Cloudray RECI W2 is the clearest pick when you need a tube with an explicit 80W to 100W range.
Pick the Cloudray W2 when you have room for a 1240 mm by 80 mm tube. Pick the Cloudray CR90 when your machine is designed for 90W to 100W operation and can accept its 1250 mm body.
Choose the Cloudray 100W power supply when an 80W to 100W system needs a matched 110V supply. Choose MCWlaser or Mssoomm when the tube is suitable but its high-voltage connections need repair.
For a smaller machine, the TEN-HIGH tube is a 40W replacement with a 700 mm by 50 mm profile. Match the tube to the machine first, then confirm the wiring and power supply before ordering.
Our top 3 picks at a glance
-
1
Best for compact laser systemsTEN-HIGH 40W CO2 Laser Tube 700mm D50mm
9.7/10 our score
See it on Amazon -
2
-
3
Best for 60W support systemsCloudray 60W Co2 Laser Power Supply 110V
9.5/10 our score
See it on Amazon
Frequently asked questions
What is the best 80W CO2 laser tube?
The Cloudray RECI W2 is the strongest match in this comparison because its stated power range is 80W to 100W, with a 1240 mm length and 80 mm diameter. Measure your existing tube and confirm the power supply before ordering, since wattage alone does not prove physical or electrical compatibility.
Can a 90W CO2 laser tube replace an 80W tube?
Only when the machine, power supply, cooling setup and mounting space support the higher-rated tube. Cloudray's CR90 is 1250 mm long and 80 mm wide, so compare those measurements with your cabinet and confirm the correct current range before making the change.
What size power supply does an 80W CO2 laser tube need?
An 80W tube needs a power supply matched to the tube and the machine's wiring. The Cloudray 100W supply is described for 80W to 100W tubes, but you still need to verify input voltage, terminals, control signals and the machine's wiring diagram.
How do I measure a replacement CO2 laser tube?
Measure the glass body length and outer diameter, then compare the high-voltage and low-voltage connection positions. Leave enough room for holders, water lines and cable routing.
The Cloudray W2 is 1240 mm long and 80 mm in diameter, while the CR90 is 1250 mm long and 80 mm wide.
Are high-voltage connectors included with CO2 laser tubes?
Some tubes have pre-connected wires or a high-voltage connector, while others may need separate connection parts. Cloudray's CR90 includes pre-connected ends and a high-voltage connector, while the MCWlaser and Mssoomm products are separate connector options.
About this guide: Our look at 80W CO2 laser tubes draws on maker specs, materials and what owners report. See how we research.



