Best picks

9 Best CO2 Laser Tubes (November 2026)

Updated on · By the Handyloom team

The best CO2 laser tubes include the TEN-HIGH 40W CO2 Laser Tube 700mm D50mm for compact 40W replacements, the MCWlaser Set of 2 High Voltage Wire for replacing connector wires, and the Cloudray 60W Co2 Laser Power Supply 110V for compatible 60W systems.

On this page (5 sections)
  1. Which CO2 laser tube fits your machine?
  2. How we compared these CO2 laser tubes
  3. Which replacement CO2 laser tubes stand out?
  4. What should you check before buying a CO2 tube laser replacement?
  5. Which CO2 laser tube should you choose?

The TEN-HIGH 40W CO2 Laser Tube 700mm D50mm is the best fit here when your machine needs a 40W tube with those exact dimensions. For other setups, compare power, length and diameter first, then check the power supply and cooling system.

A CO2 tube laser is a matched system. A tube that fits the machine physically can still be a poor match if the power supply, wiring or cooling requirements differ.

We compared the stated dimensions and system parts to help you narrow your options. Our score weighs specs, features and buyer feedback against what you’re shopping for.

Our picks at a glance

  1. 1 TEN-HIGH 40W CO2 Laser Tube 700mm D50mm
    Best for compact 40W replacements

    TEN-HIGH 40W CO2 Laser Tube 700mm D50mm

    9.7/10 our score

    See it on Amazon
  2. 2 MCWlaser Set of 2 High Voltage Wire
    Best for replacing connector wires

    MCWlaser Set of 2 High Voltage Wire

    9.6/10 our score

    See it on Amazon
  3. 3 Cloudray 60W Co2 Laser Power Supply 110V
    Best for compatible 60W systems

    Cloudray 60W Co2 Laser Power Supply 110V

    9.5/10 our score

    See it on Amazon
  1. 4Mssoomm High Voltage Wire Protective Positive

    Mssoomm High Voltage Wire Protective Positive

    Best for positive and negative connectors
    Check it
  2. 5OMTech CO2 Laser Coolant Non Conductive LiquidCheck it
  3. 6Cloudray Water Chiller CW-5200DH 6L 0.81HP 3.43gpmCheck it
  4. 7Cloudray RECI CO2 Laser Tube W2 CO2

    Cloudray RECI CO2 Laser Tube W2 CO2

    Best for a larger RECI tube fit
    Check it
  5. 8Cloudray 40W Laser Tube 720mm Dia.50mm

    Cloudray 40W Laser Tube 720mm Dia.50mm

    Best for a 720 mm tube bay
    Check it
  6. 9Cloudray 90W CO2 Laser Tube 90W-100W

    Cloudray 90W CO2 Laser Tube 90W-100W

    Best for a 90W to 100W replacement
    Check it

Which CO2 laser tube fits your machine?

The right CO2 laser tube is the one that matches your machine’s rated power and available tube bay. Measure the current tube and mounting space, then compare both length and diameter with the replacement.

A difference of 20 mm in length can affect whether the tube fits its mounts or clears other parts. Leave room for the connections and follow your machine maker’s installation guidance.

After fitting a replacement, use a CO2 tube leveling guide to check its position.

If you are replacing a tube yourself, read our How to Safely Replace a CO2 Laser Tube: Pro Guide before working around high voltage. That guide covers the replacement process, while this roundup helps compare parts.

How we compared these CO2 laser tubes

We compared products by how directly they serve a replacement decision. Tube dimensions and power come first; connectors, power supplies, coolant and chillers are included as related system parts, not as substitute tubes.

A few options have clearly stated dimensions, while others serve a different role in the cooling or electrical setup. Read each item’s fit notes carefully so you don’t confuse an accessory with a replacement tube.

ProductBest forPowerLengthDiameterOur score
TEN-HIGH 40W CO2 Laser Tube 700mm D50mmcompact 40W replacements40W700 mm50 mm9.7
MCWlaser Set of 2 High Voltage Wirereplacing connector wires9.6
Cloudray 60W Co2 Laser Power Supply 110Vcompatible 60W systems9.5
Mssoomm High Voltage Wire Protective Positivepositive and negative connectors9.4
OMTech CO2 Laser Coolant Non Conductive Liquidready-to-use coolant9.3
Cloudray Water Chiller CW-5200DH 6L 0.81HP 3.43gpmactive tube cooling9.2
Cloudray RECI CO2 Laser Tube W2 CO2a larger RECI tube fit90W to 100W rated1240 mm80 mm9.0
Cloudray 40W Laser Tube 720mm Dia.50mma 720 mm tube bay40W, maximum 45W720 mm8.6
Cloudray 90W CO2 Laser Tube 90W-100Wa 90W to 100W replacement90W to 100W1250 mm8.5

Which replacement CO2 laser tubes stand out?

The TEN-HIGH and Cloudray 40W options are the clearest fits for compact machines, while the larger Cloudray tubes target higher-power setups. Choose among them only after checking the exact dimensions and power requirements of your machine.

1

TEN-HIGH 40W CO2 Laser Tube 700mm D50mm: Best for compact 40W replacements

TEN-HIGH 40W CO2 Laser Tube 700mm D50mm, CO2 laser tubes
9.7/10Our score
  • 40W
  • 700 mm length
  • 50 mm diameter
  • High and low voltage ends preconnected

A clearly sized 40W tube for a machine with space for a 700 mm length and 50 mm diameter. The high and low voltage ends are preconnected.

See it on Amazon

Pros

  • Power and dimensions are stated
  • High and low voltage ends are preconnected
  • Nano gold catalyst coating

Cons

  • Only suited to machines that fit its dimensions and power

The TEN-HIGH tube is the top pick for a 40W machine with a 700 mm tube bay and 50 mm diameter clearance. Its stated dimensions make it easier to compare against a tube you’re replacing.

The high voltage end and low voltage port come preconnected. TEN-HIGH also says the tube has a nano gold catalyst coating and uses TEM00 output mode.

The package includes one tube. TEN-HIGH gives a 3-month warranty, excluding man-made damage, and says each tube is tested before shipping.

This is a focused replacement choice, not a universal fit. Check your machine manual and measure the old tube, including space for its connections, before ordering.

TEN-HIGH 40W CO2 Laser Tube 700mm D50mmCheck it on Amazon
2

MCWlaser Set of 2 High Voltage Wire: Best for replacing connector wires

MCWlaser Set of 2 High Voltage Wire, CO2 laser tubes
9.6/10Our score
  • Set of 2
  • Connects CO2 power supply and tube
  • Compatibility stated for 40W to 150W supplies

A pair of high-voltage wire connectors for the connection between a CO2 power supply and tube. It can suit buyers replacing connectors rather than the tube itself.

See it on Amazon

Pros

  • Two connectors in the set
  • Stated range covers 40W to 150W supplies

Cons

  • Not a laser tube

The MCWlaser set is for buyers replacing the connection between a CO2 power supply and tube. It contains two high-voltage wire connectors and is described for supplies from 40W to 150W.

This is an accessory, so it won’t replace a damaged or aging laser tube. Confirm that the connector type matches your machine and that the set suits the existing wiring arrangement.

The supplied facts don’t give a wire length or tube dimensions. If the cable itself needs replacement, check the length you need and the connection details before choosing a set.

MCWlaser Set of 2 High Voltage WireCheck it on Amazon
3

Cloudray 60W Co2 Laser Power Supply 110V: Best for compatible 60W systems

Cloudray 60W Co2 Laser Power Supply 110V, CO2 laser tubes
9.5/10Our score
  • 60W power supply
  • 110V input
  • TTL start and stop
  • External LCD ammeter connection

A 60W power supply for a compatible 55W or 60W tube setup. Check the wiring diagram and interface against your existing system before replacing a supply.

See it on Amazon

Pros

  • Power rating and input voltage are stated
  • Includes output and water-through indicators
  • External LCD ammeter connection

Cons

  • Not a laser tube
  • Wiring interface may differ from another supply

Cloudray’s 60W supply is intended for a compatible 55W or 60W tube setup and takes 110V AC input. It includes TTL start and stop functionality, plus indicators for output and water-through status.

Cloudray also describes an external LCD ammeter connection for monitoring processing current. Its product information notes that power supply interfaces can differ, so compare the wiring diagram and existing connections before changing supplies.

This is not a tube. It belongs on your shortlist only if your current supply is the part that needs replacement and the power, voltage and wiring match your machine.

Cloudray 60W Co2 Laser Power Supply 110VCheck it on Amazon
4

Mssoomm High Voltage Wire Protective Positive: Best for positive and negative connectors

Mssoomm High Voltage Wire Protective Positive, CO2 laser tubes
9.4/10Our score
  • Positive and negative connector heads
  • Metal terminal with heat shrink tube
  • Compatibility stated for several supply powers

A connector set for linking a CO2 power supply and tube. It may help when replacing connector heads, but it does not replace the tube or its power supply.

See it on Amazon

Pros

  • Includes positive and negative heads
  • Includes a metal terminal and heat shrink tube

Cons

  • Not a laser tube

The Mssoomm set includes positive and negative connector heads, a metal terminal and heat shrink tube. It is intended to connect a CO2 laser power supply and tube, with compatibility stated for a range of supply powers.

Like the MCWlaser option, this is a wiring accessory rather than a tube. Check which connector heads your system needs and confirm the polarity and wiring instructions for your machine.

Mssoomm says the wire can be supplied in different lengths by contacting the company. If you need a particular cable length, confirm it before you buy.

Mssoomm High Voltage Wire Protective PositiveCheck it on Amazon
5

OMTech CO2 Laser Coolant Non Conductive Liquid: Best for ready-to-use coolant

OMTech CO2 Laser Coolant Non Conductive Liquid, CO2 laser tubes
9.3/10Our score
  • Prediluted coolant
  • Ethylene glycol based
  • OMTech states 10 µS/cm conductivity
  • Compatible with CO2 machine chillers and cooling tanks

A prediluted coolant option for a CO2 laser cooling system. OMTech says it resists freezing and overheating; check your chiller guidance before mixing or changing fluids.

See it on Amazon

Pros

  • Ready to use
  • OMTech states low conductivity

Cons

  • OMTech warns against mixing it with other coolants

OMTech’s coolant is a prediluted fluid for a CO2 laser cooling system. The product details describe it as ethylene glycol based and say it is compatible with CO2 machine chillers and cooling tanks.

OMTech says the coolant protects against freezing to -31°F and has low conductivity of 10 µS/cm. These are maker claims, so check your equipment’s coolant requirements and follow the chiller instructions.

OMTech warns against mixing the fluid with other coolants and against using automotive antifreeze in a laser system. Clean the cooling system with distilled or deionized water before filling, as OMTech directs.

OMTech CO2 Laser Coolant Non Conductive LiquidCheck it on Amazon
6

Cloudray Water Chiller CW-5200DH 6L 0.81HP 3.43gpm: Best for active tube cooling

Cloudray Water Chiller CW-5200DH 6L 0.81HP 3.43gpm, CO2 laser tubes
9.2/10Our score
  • 6 L tank
  • 3.43 gpm flow rate
  • Compatible with 60W to 150W tubes
  • Temperature control

An active water chiller for machines using compatible 60W to 150W CO2 tubes. Check the dimensions, power connection and cooling requirements for your setup.

See it on Amazon

Pros

  • Tube compatibility range is stated
  • 6 L tank
  • Temperature control

Cons

  • Not a laser tube
  • Minimum temperature should not be held for an extended period, according to Cloudray

The Cloudray CW-5200DH is an active water chiller for compatible 60W to 150W CO2 tubes. Its stated tank capacity is 6 L and its flow rate is 3.43 gpm.

Cloudray gives a minimum temperature of 5°C and advises against holding that minimum for an extended period because it may cause the flow switch to break. Check your machine’s cooling requirements and the chiller’s placement dimensions before choosing it.

This item cools a tube; it does not replace one. If you need a tube for a 40W machine, compare the TEN-HIGH or Cloudray 40W options instead.

Cloudray Water Chiller CW-5200DH 6L 0.81HP 3.43gpmCheck it on Amazon
7

Cloudray RECI CO2 Laser Tube W2 CO2: Best for a larger RECI tube fit

Cloudray RECI CO2 Laser Tube W2 CO2, CO2 laser tubes
9.0/10Our score
  • Rated 90W to 100W
  • 1240 mm length
  • 80 mm diameter
  • Removable lens cover

A larger RECI W2 tube for a machine that can fit its 1240 mm length and 80 mm diameter. Cloudray gives a recommended current of 25 mA.

See it on Amazon

Pros

  • Power and tube dimensions are stated
  • Removable lens cover

Cons

  • Requires a machine with room for a large tube

The Cloudray RECI W2 is a large tube, rated at 90W to 100W, with a stated length of 1240 mm and diameter of 80 mm. It suits a machine designed for this size and power range, not a compact 40W engraver.

Cloudray gives a recommended current of 25 mA and describes a removable lens cover. For lens choices and maintenance, see laser cutter lenses.

Those details can help compare it with a current tube, but you still need to confirm your machine’s supply and installation requirements.

Measure the available space carefully, including room at the ends for connections. For an 80W option, see our guide to the best 80w co2 laser tube.

Cloudray RECI CO2 Laser Tube W2 CO2Check it on Amazon
8

Cloudray 40W Laser Tube 720mm Dia.50mm: Best for a 720 mm tube bay

Cloudray 40W Laser Tube 720mm Dia.50mm, CO2 laser tubes
8.6/10Our score
  • 40W, up to 45W
  • 720 mm length
  • 50 mm outer diameter
  • High and low voltage ends preconnected

A 40W tube with a 720 mm length and 50 mm outer diameter. Confirm the bay has clearance beyond those measurements and that your machine is compatible.

See it on Amazon

Pros

  • Dimensions and power range are stated
  • High and low voltage ends are preconnected

Cons

  • Tube holder is not included

This Cloudray CR35 tube is rated 40W, with a maximum of 45W, and measures 720 mm long by 50 mm in outer diameter. It may fit a machine that needs those dimensions, but it is 20 mm longer than the TEN-HIGH 40W option.

Cloudray says the high and low voltage ends are preconnected. It also notes that a tube holder is not included, so check whether you need a separate holder for your machine.

The maker advises confirming the tube’s length and diameter and leaving slightly more installation space than the tube itself. If you need a 50W tube instead, compare the best co2 laser tube 50w options.

Cloudray 40W Laser Tube 720mm Dia.50mmCheck it on Amazon
9

Cloudray 90W CO2 Laser Tube 90W-100W: Best for a 90W to 100W replacement

Cloudray 90W CO2 Laser Tube 90W-100W, CO2 laser tubes
8.5/10Our score
  • 90W, up to 100W
  • 1250 mm length
  • 80 mm outer diameter
  • Preconnected cable

A 90W to 100W tube for a machine with enough room for its 1250 mm length and 80 mm diameter. Compare the exact dimensions and electrical compatibility with your current setup.

See it on Amazon

Pros

  • Power and dimensions are stated
  • Cable is preconnected

Cons

  • Tube holder is not included
  • Requires a large installation space

Cloudray’s CR90 tube is rated 90W to 100W and measures 1250 mm long by 80 mm in outer diameter. It is a possible replacement only for a compatible larger machine with enough installation space.

The cable is preconnected, according to Cloudray, and the tube holder is not included. Measure the machine bay and check the required tube power before choosing it.

This tube is 10 mm longer than the RECI W2 option in this roundup. That difference could matter in a tight machine bay, so compare both measurements against your current tube and mounting space.

Cloudray 90W CO2 Laser Tube 90W-100WCheck it on Amazon

What should you check before buying a CO2 tube laser replacement?

Before buying, compare the tube’s rated power, length and diameter with the original tube and your machine manual. Then confirm that your power supply, wiring and cooling system suit the replacement.

Does a higher wattage CO2 tube fit any machine?

No. A higher wattage tube can have different dimensions and electrical requirements, and the existing power supply may not be suitable.

Confirm the machine’s supported power range and installation space before moving from a 40W tube to a 60W or 90W option.

For a 60W machine, compare a best 60w co2 laser tube shortlist and check your machine’s requirements against every tube’s dimensions. A power number alone doesn’t confirm compatibility.

Why do tube length and diameter matter?

The tube has to fit the machine bay and its mounting points, with room for the connections. Compare your old tube’s full length and diameter to the replacement, then check available space in the machine rather than relying on the model name alone.

A tube that looks close in size may still be too long for the bay. Account for clearance at both ends and follow the manufacturer’s instructions for mounting.

Do CO2 tubes need a matching power supply?

Yes, the tube and power supply need to be compatible. The Cloudray 60W supply is described for 55W and 60W tubes, but the machine’s wiring and power requirements also matter.

If you’re replacing the supply, compare its input voltage, output power and interface with your existing setup. Don’t assume that a connector fitting physically means the electrical system is compatible.

What cooling setup does a CO2 laser tube need?

Use a cooling system suited to your machine and tube. The Cloudray CW-5200DH is described for 60W to 150W tubes, while the OMTech coolant is described for CO2 laser chillers and cooling tanks.

Follow the equipment maker’s guidance for coolant type, flow and temperature. Avoid mixing fluids unless the makers confirm they are compatible.

Which CO2 laser tube should you choose?

Choose the TEN-HIGH if your machine needs a 40W tube measuring 700 mm by 50 mm. Choose the Cloudray CR35 if your compatible machine needs a 720 mm tube with a 50 mm diameter, or consider the larger Cloudray options when your machine is built for their dimensions and power.

For other machines, start with the original tube’s measurements and your equipment manual. Compare power supply and cooling requirements before you order a replacement CO2 laser tube.

Our top 3 picks at a glance

  1. 1 TEN-HIGH 40W CO2 Laser Tube 700mm D50mm
    Best for compact 40W replacements

    TEN-HIGH 40W CO2 Laser Tube 700mm D50mm

    9.7/10 our score

    See it on Amazon
  2. 2 MCWlaser Set of 2 High Voltage Wire
    Best for replacing connector wires

    MCWlaser Set of 2 High Voltage Wire

    9.6/10 our score

    See it on Amazon
  3. 3 Cloudray 60W Co2 Laser Power Supply 110V
    Best for compatible 60W systems

    Cloudray 60W Co2 Laser Power Supply 110V

    9.5/10 our score

    See it on Amazon