7 Best Heat Press Pillows and Pads (November 2026)
The best heat press pillows and pads include the SUNHE YHK Heat Press Pillow for most home crafters, the Treela 2 Pcs 12 x 15 Inch for platen protection, and the TransWonder Heat Press Pillow Bundle for large back prints.
On this page (10 sections)
- The best heat press pillows and pads for seams, zippers and large prints
- At a glance: all 7 heat press pillows and pads compared
- How we compared these heat press pillows and pads
- What size heat press pillow should you buy?
- Is a pillow, a pad or a mat the right tool?
- How do you use a heat press pillow for HTV and sublimation?
- How do you choose by heat rating and material?
- What about large presses and foam inserts?
- How do you set up and care for heat press pillows and pads?
- The verdict: which heat press pillow or pad should you buy?
The best heat press pillows and pads for most crafters is the SUNHE YHK 4 pack, because its four sizes cover the jobs home users do most often. It includes 5x5, 10x10, 12x15 and 5x15 inch pillows with a PTFE cover rated to 428 F.
You need a pillow when a design crosses a raised area. Thick seams, collars, buttons and zippers press too hard in those spots, while the rest of the design gets less pressure.
A pillow lifts the fabric and helps pressure spread more evenly.
Start with your heat press machine if you are new to pressing. Then match the pillow size to your print area, and check the heat rating against your HTV or sublimation settings.
For curved caps, see heat press pillows for hats.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared sizes, materials, heat ratings and what is in each box.
Our picks at a glance
- 4
Check itSHINFARE Heat Press Pillows and Pads Kit
Best with shirt rulers - 5
Best for high heat ratingsCheck it - 6
Best all in one kitCheck it - 7
Check itEXCEART Pressing Pillow Heat Press Pad
Best for small items
The best heat press pillows and pads for seams, zippers and large prints
The picks below cover four jobs. The SUNHE set covers everyday sizes, the Treela covers protect platens, the TransWonder bundle covers large prints, and the EXCEART pads cover small items.
Read the trade off for each one before you choose.
SUNHE YHK Heat Press Pillow: Best for most home crafters
- 4 pack in 4 sizes
- PTFE non-stick cover
- High-density foam core
- Rated to 428 F
Four practical sizes cover small sleeve prints and larger shirt and hoodie designs. The PTFE cover helps with even pressure over seams and zippers.
Pros
- Four sizes in one set
- Non-stick PTFE cover
- Waterproof and wipe clean
Cons
- 428 F limit is lower than some rivals
- No 16x20 inch pillow included
SUNHE YHK suits home crafters and small studios who press shirts, hoodies, bags and baby bodysuits. Its four sizes let you match the pillow to the print area instead of using one pad for every job.
The 5x5 inch pillow fits sleeves, pockets and baby bodysuits. The 10x10 and 12x15 inch pillows fit front and back prints on T-shirts and hoodies.
The 5x15 inch pillow fits long sleeve designs and other narrow areas that a square pad would miss.
Each pillow has a non-stick PTFE cover over high density foam. The foam core gives the lift, and the PTFE cover helps the pillow release cleanly from vinyl and fabric.
SUNHE YHK rates the set to 428 F, so check your material settings before you press near the top of that range.
The waterproof PTFE surface also helps protect your platen and work table from dye, adhesive and scorch marks. You can wipe the pillow tidy after a project and reuse it for the next garment.
The trade off is heat rating and size range. Two rivals here rate to 500 F or higher, and this set has no 16x20 inch pillow for oversized back prints.
Choose SUNHE YHK for everyday sizes, and choose a larger bundle only when your prints truly need that extra width.
Treela 2 Pcs 12 x 15 Inch: Best for platen protection
- 2 pieces, about 15 x 12 in
- PTFE coating with polyester back
- Rated to 500 F
- Fits upper and lower platens
These are wrap covers for platens rather than thick pressing pillows. They protect the upper platen and the lower pad from scratches and residue.
Pros
- Two covers for both platens
- 500 F rating
- Easy to remove and clean
Cons
- Not a thick pillow for seams
- Not suitable for bottom platen with front handle
Treela suits a different job from the pillows in this guide. These two wrap covers fit over your upper and lower platens to protect them from scratches, ink and adhesive residue during daily pressing.
Each cover measures about 15 x 12 x 1.38 inches. The front uses PTFE coating, and the back uses polyester fabric.
That back helps the cover wrap and unwrap with less effort, and it helps the cover stay in place while you load a garment.
Treela rates the covers to 500 F. The non-stick surface wipes clean with a damp cloth after cooling.
That makes cleanup faster when ink or adhesive gets on the platen, and it helps keep the silicone pad on the lower platen in better shape.
This is not a thick pressing pillow. It will not lift a seam or spread pressure over a zipper the way a foam pillow does.
Buy it to protect your press, and pair it with a foam pillow when a garment has uneven areas under the design.
Treela notes the covers are not suitable for a bottom platen with a front handle. Measure your platen and check that detail before you order, especially if your press has a handle or frame in front.
TransWonder Heat Press Pillow Bundle: Best for large back prints
- 5 pack including 16x20 in
- Sizes from 5x5 to 16x20 in
- PTFE cover with foam core
- Rated to 500 F
The extra large 16x20 inch pillow suits tote bags, hoodies and full back prints. Five sizes cover small pockets through oversized designs.
Pros
- Includes 16x20 inch pillow
- Five sizes
- 500 F rating
Cons
- Large pillow needs a large platen
- Fewer buyer patterns to compare
TransWonder suits buyers who press large designs on hoodies, tote bags and handbags. Its 16x20 inch pillow is the largest in this guide and fits full back prints that smaller pads cannot support.
The bundle includes five sizes. You get 5x5, 5x10, 10x10 and 12x15 inch pillows, plus the 16x20 inch pillow.
Most sets stop at four pieces, so this bundle adds the large size without a separate purchase, and it still covers pockets and small chest logos.
Each pillow has a Teflon PTFE cover over a foam core. TransWonder rates the pillows to 500 F.
The brand says the soft surface helps distribute pressure and reduce imprints from zippers, buttons and seams. That soft lift also helps with moisture bleed through on delicate sublimation fabrics.
The trade off is platen size. A 16x20 inch pillow needs room to sit under the print area without folding.
Measure your platen and your largest print before you choose this bundle over a 12x15 inch set that fits more presses.
TransWonder says the pillows work with Cricut and Silhouette machines as well as standard heat press machines. That helps buyers who switch between tools, but a large pillow still needs a large flat press to work well.
SHINFARE Heat Press Pillows and Pads Kit: Best with shirt rulers
- 9 pack kit
- 4 pillows plus 5 shirt rulers
- Teflon coated pillows
- Sizes include 5x5, 10x10, 12x12 and 5x15 in
Four pillows plus five clear shirt rulers help you center designs as well as press them. The 5x15 inch pillow suits sleeve designs and the 12x12 inch suits full back prints.
Pros
- Pillows plus alignment rulers
- Covers sleeves and back prints
- Teflon coated surface
Cons
- No 16x20 inch pillow
- Rulers add bulk if you only need pillows
SHINFARE suits buyers who struggle with placement as much as pressure. This 9 piece kit pairs four pillows with five clear shirt rulers, so you can center a design and then press it.
For more tools to pair with a pillow, see heat press accessories.
The pillows come in 5x5, 10x10, 12x12 and 5x15 inch sizes. The 5x5 inch pillow suits pocket logos, the 5x15 inch suits sleeve designs, and the 12x12 inch suits full back prints.
That mix covers the areas where placement errors show most, from sleeves to large centered designs.
The five rulers range from 10x2.5 to 10x6 inches. They use precision grids and a collar notch to help you line up designs.
The clear material and etched measurements help you see placement before you press, which saves time on repeat orders.
The pillows have Teflon coated surfaces over fire resistant foam cores. SHINFARE says the foam helps create a flatter surface for hoodies, canvas bags and baby clothes with stubborn seams.
The non-stick surface also helps you lift the press without dragging the design.
The trade off is scope. You get rulers instead of a 16x20 inch pillow, and you carry more pieces to store between projects.
Choose SHINFARE if alignment matters most, and choose TransWonder if large prints matter more.
MR.R Heat Press Pillow Bundle: Best for high heat ratings
- 4 sizes
- 0.4 in thick
- Teflon with fire resistance foam
- Rated to 660 F in title data
Four 0.4 inch thick pillows in the sizes most crafters use for shirts and baby onesies. MR.R says the Teflon cover and fire resistance foam handle high heat.
Pros
- Four common sizes
- 0.4 in thickness
- High stated heat rating
Cons
- No extra large size
- Heat ratings differ across descriptions
MR.R suits buyers who want the four sizes most people use, at 0.4 inch thickness. The bundle includes 5x5, 10x10, 12x15 and 5x15 inch pillows, which cover pockets, sleeves, front prints and back prints.
Each pillow uses non-stick Teflon over fire resistance foam. MR.R says the pillows help with HTV on uneven surfaces such as thick seams, collars, buttons, mesh and zippers.
The waterproof cover also helps protect your work surface and makes wipe clean care simple.
The title data rates the pillows to 660 F. That is the highest rating in this guide.
Check the rating that matters for your exact set before you press at high heat, because descriptions for similar MR.R sets list different limits.
The 0.4 inch thickness gives a gentle lift under the print area. That lift helps the press reach areas that sit below a seam.
It also means the pillow needs room inside the garment or under the print area, so flat placement matters on small items.
The trade off is range. There is no 16x20 inch pillow and no extra tools in the box.
Choose MR.R for a simple four size set with a high stated rating, and add a large pillow later for oversized prints.
MR.R 9 in 1 Heat Press Pads: Best all in one kit
- 9 in 1 kit
- 4 pillows, 2 Teflon sheets, 2 tape rolls and 1 glove
- Pillow sizes 5x5 to 12x15 in
- PTFE material
Four pillows plus Teflon sheets, heat resistant tape and a glove cover more of the pressing workflow in one box. It suits buyers starting from scratch.
Pros
- Sheets, tape and glove included
- Four pillow sizes
- One kit covers basics
Cons
- More pieces than many buyers need
- No 16x20 inch pillow
MR.R 9 in 1 suits buyers who want more than pillows in one box. The kit includes four pillows, two Teflon sheets, two rolls of heat resistant tape and one glove for a fuller press station.
The pillows match the sizes in the MR.R bundle above. You get 5x5, 10x10, 5x15 and 12x15 inch pillows at 0.4 inch thickness.
The sheets measure 12x16 and 16x20 inches, and the tape rolls measure 0.2 inch and 0.4 inch by 108 feet, which suits holding transfers in place.
The pillows use PTFE over fire resistance foam and are waterproof. The brand says the set helps with digital transfer, screen print and heat transfer vinyl on uneven surfaces.
The glove helps you handle hot items, and the sheets help protect designs during a second press.
The trade off is that you may not need every extra. If you already own Teflon sheets and tape, the pillow only bundle may suit you better and take less space.
If you are starting a press station, the extras save separate shopping and help you test each tool.
There is no 16x20 inch pillow in this kit. Buy it for a starter set, and add a large pillow later if you press big back prints on hoodies and tote bags.
EXCEART Pressing Pillow Heat Press Pad: Best for small items
- 2 pieces at 5 x 5 in
- Teflon material
- Reusable and heat resistant
- For baby clothes, hats and accessories
Two small 5 x 5 inch pads suit baby clothes, hats and small accessories. It is a focused choice when you only press small areas.
Pros
- Right size for baby items and hats
- Two pads included
- Reusable Teflon surface
Cons
- Only one size
- Too small for shirts and hoodies
EXCEART suits buyers who press small items most of the time. The set includes two 5 x 5 inch pillows for baby clothes, hats, socks and small accessories.
The Teflon surface gives a smooth area for iron on transfers. The pillows are reusable and heat resistant.
That makes them a low cost way to handle pockets, small logos and baby bodysuits without buying a full four size set you may not use.
The size is the main limit. A 5 x 5 inch pad cannot support a front print on a T-shirt or a back print on a hoodie.
It fits the print area, not the whole garment, so it works best when your designs stay small and centered.
EXCEART lists the item at 5 x 5 inches and 32 grams per pillow. The light weight makes it easy to position under a small garment area, and the compact shape stores easily in a drawer or craft tote.
Choose EXCEART if your projects are mostly small. Choose a four size set if you also press shirts, hoodies and bags, because one small pad will slow you down on larger work.
At a glance: all 7 heat press pillows and pads compared
Use this table to compare size range, material and heat rating before you read the buying advice. The best choice depends on your largest print and your hottest setting.
| Product | Best for | Sizes | Material | Upper temperature rating | Our score |
|---|---|---|---|---|---|
| SUNHE YHK Heat Press Pillow | most home crafters | 5x5, 10x10, 12x15 and 5x15 in | PTFE with foam core | 428 F | 9.7 |
| Treela 2 Pcs 12 x 15 Inch | platen protection | PTFE coating, polyester fabric | 500 F | 9.6 | |
| TransWonder Heat Press Pillow Bundle | large back prints | 5x5, 5x10, 10x10, 12x15 and 16x20 in | Teflon PTFE with foam core | 500 F | 9.4 |
| SHINFARE Heat Press Pillows and Pads Kit | with shirt rulers | 9.1 | |||
| MR.R Heat Press Pillow Bundle | high heat ratings | 5x5, 10x10, 12x15 and 5x15 in | 660 F | 8.9 | |
| MR.R 9 in 1 Heat Press Pads | all in one kit | PTFE | 8.6 | ||
| EXCEART Pressing Pillow Heat Press Pad | small items | Teflon | 8.4 |
How we compared these heat press pillows and pads
We checked sizes, counts, materials and heat ratings for each set. We also noted what is in the box, because some kits add rulers, sheets, tape or gloves.
We looked at how each pillow would help with seams, collars, buttons and zippers. A thicker foam pillow lifts uneven areas more than a thin wrap cover.
We checked buyer patterns for fit and use. Owners often mention size range and ease of cleaning when they choose a set.
We did not test these pillows by hand. Scores come from specs, features and buyer feedback against your search.
We also checked whether extra pieces match real pressing steps. Rulers help with centering, sheets help with a second press, and tape helps hold a design before heat is applied.
Heat rating mattered in the comparison, but only as a stated limit. A higher rating helps when your material needs high heat, while a lower rating may still fit lower heat HTV work.
Thickness and shape mattered too, because a pillow that folds under fabric will not spread pressure well. Size still comes first, since the pillow must sit flat under the print area.
What size heat press pillow should you buy?
The right size matches your print area, not your garment size. A pillow that is too large can fold or shift under the fabric, and a pillow that is too small may not support the design.
5x5 inch pillows for pockets and baby items
A 5x5 inch pillow suits pockets, small chest logos, hats and baby bodysuits. EXCEART offers only this size, while SUNHE YHK and MR.R include it in larger sets.
10x10 and 12x15 inch pillows for shirts and hoodies
A 10x10 or 12x15 inch pillow suits most front prints and many back prints. This is the range most home crafters need for T-shirts and hoodies.
16x20 inch pillows for large back prints
A 16x20 inch pillow suits tote bags, hoodies and oversized back designs. TransWonder is the only set here with this size, so choose it when your prints are large.
If your press is 15x15 inches, check our best 15x15 heat press mat guide for platen sized options. If your press is 16x20 inches, our best 16x20 heat press pad guide covers that fit.
Is a pillow, a pad or a mat the right tool?
These words overlap, but they describe different jobs. A pillow has foam inside, a pad is usually flatter, and a mat often protects the platen.
Pillows for uneven surfaces
A pillow lifts seams, zippers and buttons so pressure spreads more evenly. It helps most when a design crosses a raised area.
Pads for flat pressing and heat protection
A pad gives a flat, heat resistant surface. For a flat platen sized pad, see our best heat press mat roundup.
Wrap covers for platen protection
A wrap cover fits over a platen to block scratches and residue. Treela makes this type of cover, and it does not replace a foam pillow.
If you want a replacement for a worn lower pad, our best silicone pad for heat press guide covers that job. If you want a board under a garment, see our best heat press board picks.
How do you use a heat press pillow for HTV and sublimation?
Place the pillow under the print area and keep it flat. The pillow should lift the fabric, not bunch it or create folds.
Step by step for a shirt with a seam
Slide the pillow inside the shirt or under the print area. Press as you normally would, then remove the pillow after the transfer cools as your material requires.
Our how do you use heat press mat guide covers the basic press workflow. Use it with a pillow when seams or zippers sit under your design.
Using a pillow with a cover sheet
A best heat press cover sheet protects the design during a second press. Use the sheet over the design and the pillow under the garment.
How do you choose by heat rating and material?
Match the pillow rating to your hottest setting, with room to spare. PTFE and Teflon covers resist sticking, and foam cores give the lift.
SUNHE YHK rates to 428 F, while Treela and TransWonder rate to 500 F. MR.R rates its bundle to 660 F in the title data.
Choose the rating that fits your HTV or sublimation material.
If you use an HTVRONT press, our best heat press mat for htvront guide helps you match platen sized accessories. If you use a Cricut, our best heat press mat for cricut guide covers that setup.
What about large presses and foam inserts?
A large press may need a large pillow or a large mat, depending on the job. For a big platen, see our best large heat press mat guide.
If you cut custom supports for storage or tools, our guide to How to Laser Cut Foam Inserts for Tool Boxes explains that separate task. A foam insert does not replace a heat resistant pillow.
How do you set up and care for heat press pillows and pads?
Store pillows flat so the foam keeps its shape. A bent pillow may not spread pressure evenly on the next press.
Let pillows cool before you clean them. Wipe PTFE surfaces with a damp cloth and avoid sharp tools that could tear the cover.
Check the foam for compression over time. If a pillow feels flat, it may not lift seams as well as it did when new.
Keep pillows away from direct contact with wet ink or adhesive when you can. That helps the non-stick surface stay clean for the next project.
When to replace a pillow or cover
Replace a pillow when the foam stays compressed or the cover tears. A flat pillow will not lift a seam, and a torn cover can snag fabric or stick to designs.
Replace a wrap cover when the PTFE coating wears through or the back loses its grip. A loose cover can shift during loading and create uneven heat contact.
The verdict: which heat press pillow or pad should you buy?
The best heat press pillows and pads for most buyers is the SUNHE YHK 4 pack, because it covers everyday sizes with a cleanable PTFE cover. Buy TransWonder if you need 16x20 inches, SHINFARE if you want rulers, and Treela if you need platen covers.
Pick EXCEART only for small items. Pick MR.R 9 in 1 if you want sheets, tape and a glove in one box.
Next, measure your largest print area and match it to the pillow size. Then check the heat rating against your material before you press.
If you press mostly flat garments with no seams, a thin mat may be enough. If your designs cross zippers, collars or thick seams, a foam pillow is the better tool.
Our top 3 picks at a glance
Frequently asked questions
What is a heat press pillow used for?
A heat press pillow sits under the print area and lifts the fabric so seams, zippers and buttons do not press harder than the rest of the garment. That helps HTV, sublimation and screen print designs adhere more evenly.
Choose a size that matches the print area.
What size heat press pillow do I need?
Match the pillow to the print area, not the whole garment. A 5x5 inch pillow suits pockets and baby bodysuits, while 12x15 inch suits most front and back prints.
A 16x20 inch pillow suits large back prints and tote bags.
Can a heat press pillow go over a zipper?
A pillow is placed under the garment to raise uneven areas, not usually over the zipper itself. The raised surface helps pressure spread over thick seams and collars.
Keep the print area flat and check your press instructions for zipper safety.
How do you clean a heat press pillow?
Most PTFE pillows wipe clean with a damp cloth after cooling. Let the pillow cool fully before cleaning and store it flat.
Do not use sharp tools that could tear the cover.
About this guide: Our look at heat press pillows and pads draws on maker specs, materials and what owners report. See how we research.



