7 Best Heat Press Accessories (November 2026)
The best heat press tools and pressing supplies include the tietoc 18Pcs Sublimation Accessories for centered designs, the Eorbow 8 Pack Heat Press Pillow Mat for seams and zippers, and the HAWERSI HTV Cooling Block with Handle for faster cooling.
On this page (8 sections)
- Best heat press accessories for a practical starter kit
- How to compare heat press accessories for your press
- What accessories do you need first for a heat press?
- How do pressing pillows help with seams and zippers?
- How do cooling blocks improve HTV and DTF work?
- Which starter kit covers the most ground?
- What setup and storage help accessories last longer?
- The verdict on the best heat press accessories
The best heat press accessories for most beginners are the tietoc 18Pcs Sublimation Accessories, because rulers, Teflon sheets and heat tape handle centering and protection in one pack. The Eorbow pillows are the better pick for seams and zippers.
The HAWERSI and Luxiys blocks suit DTF and HTV users who want faster cooling.
You do not need every tool on this list to start pressing. A small kit of compatible tools and pressing supplies covers most first projects.
If your press pad needs replacing, compare silicone heat press pads.
Add pillows and cooling blocks only when your garments or transfer types call for them.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared piece counts, sizes, materials and temperature ratings across these seven picks.
We looked at how each item fits a home press workflow, from alignment to cooling.
Start with a heat press machine if you do not own a press yet. If your press has a failed control box, compare replacement heat press control boxes.
Accessories cannot fix a press that is too small for your designs.
Match sheet and pillow sizes to your platen before you order extras.
Our picks at a glance
- 4
Check itSHINFARE Heat Press Pillows and Pads Kit
Best for pillow and ruler combo - 5
Check itHTVRONT Heat Press Accessories
Best for 15 x 15 machines - 6
Check itDNSGOOR Sublimation Shirts Tool Kits for Vinyl
Best for platen protection - 7
Check itLuxiys HTV Cooling Block with Handle
Best for DTF transfers
Best heat press accessories for a practical starter kit
The tietoc kit leads because it covers the tasks you repeat on every shirt. Pillows rank next because uneven surfaces cause many failed transfers.
Cooling blocks rank high for DTF and HTV, where cooling time affects your workflow.
tietoc 18Pcs Sublimation Accessories: Best for centered designs
- 8 T-shirt alignment rulers
- 2 Teflon sheets 16 x 20 in
- 2 heat tape rolls 0.4 in x 108 ft
- Felt squeegee and washable pens
A broad starter kit built around eight PVC rulers, two 16 x 20 in Teflon sheets and two rolls of heat tape for centering and protecting designs.
Pros
- 8 rulers for different placements
- Two large Teflon sheets
- Heat tape rated to 250 C
Cons
- Yellow rulers may clash with some garments
- No pressing pillows included
The tietoc 18Pcs Sublimation Accessories suit beginners who press T-shirts daily and keep mis-centering designs. Its eight PVC rulers line up at the collar so you can place a design before you close the press.
Two rulers are smooth on both sides, which helps when you flip them to read the scale. The rulers use UV printed numbers that stay readable against many shirt colors, and the premium PVC construction means they can be reused across home sewing and business runs without bending out of shape.
Two Teflon sheets measure 16 x 20 in and resist heat to 600 degrees. You can lay one over a design during pressing or rest a hot garment on it afterward.
The sheets are washable and reusable, so they protect your work surface across many projects. They are waterproof, which makes clean up simple when ink or residue lands on them.
Two rolls of heat tape measure 0.4 in by 108 ft and resist heat to 250 C. The tape holds sublimation paper in place and peels off without residue.
A felt squeegee, soft measuring tape, three washable pens and 40 pins round out the kit. The trade-off is scope.
There are no pressing pillows, so seams and zippers still need a separate fix. Yellow rulers read clearly on many colors, but they may blend with a yellow garment.
Eorbow 8 Pack Heat Press Pillow Mat: Best for seams and zippers
- 4 pillow sizes
- 2 Teflon sheets 15.7 x 11.8 in
- 2 PI tape rolls 0.3 in x 33 m
- PTFE coating rated to 220 C
Four Teflon-coated pillows in different sizes, plus sheets and tape, to flatten seams, zippers and thick edges during pressing.
Pros
- Four pillow sizes in one pack
- Non-stick PTFE surface
- Easy to wipe clean
Cons
- No alignment rulers
- Largest pillow may be too big for small designs
The Eorbow 8 Pack Heat Press Pillow Mat suits anyone pressing over seams, zippers, buttons or thick hems. Its four pillow sizes measure 15.5 x 13 in, 11.4 x 10.5 in, 15.5 x 5.8 in and 6.3 x 5.7 in.
You can match the pillow to a chest print, a sleeve or a small pocket logo. Having four sizes matters because a pillow that is too large can bunch fabric, while one that is too small leaves the edge of a design unsupported during pressing.
Each pillow uses fire-retardant foam coated with fiberglass and a PTFE Teflon surface. Eorbow says the coating withstands 220 C.
The smooth surface spreads heat and pressure, and it wipes clean after glue, wax or thread residue. That non-stick finish also helps you slide a garment off the pillow without sticking the fabric to the pad.
Two Teflon sheets measure 15.7 x 11.8 in, and two PI tape rolls measure 0.3 in by 33 m each. Together they cover protection and hold-down tasks for sublimation and vinyl projects.
The tape is described as easy to stick and clean to peel. The trade-off is alignment.
There are no rulers in this pack, so you will still need a separate guide for centering. The largest pillow also takes more storage space than a single small pad.
HAWERSI HTV Cooling Block with Handle: Best for faster cooling
- 4 x 4 in cooling area
- Metal handle
- Heat absorbing material
- For HTV, DTF film and sublimation paper
A handled 4 x 4 in metal block that sits on fresh transfers to draw heat away and speed cooling between presses.
Pros
- Handle keeps fingers away from heat
- Compact 4 x 4 in surface
- Works with HTV and DTF film
Cons
- Small surface for large designs
- Chilling in a fridge improves results
The HAWERSI HTV Cooling Block with Handle suits DTF and HTV users who press several small designs in a row. Its cooling area measures 4 x 4 in, so it covers a pocket print or a small chest design without repeated moves.
The metal handle stays cool enough to grip while the block draws heat from a fresh transfer. That handle changes how you work, because you can apply steady pressure and move the block back and forth without hovering your fingers near the hot surface.
HAWERSI says the heat absorbing material cools the surface fast. You place the block on the vinyl or film after pressing, then move it back and forth.
Storing the block in a fridge or freezer before use gives you a colder surface for the next press. The smooth top surface helps you slide it across different projects without snagging.
The block works with heat transfer vinyl, DTF film, sublimation paper and heat transfer paper. It also fits T-shirts, bags, shoes, pillows and mouse pads.
At 3.9 x 3.9 x 2.9 in and 1.32 lb, it stores in a small drawer. The trade-off is coverage.
A 4 x 4 in surface will not cool a full back print in one pass. For repeat work, HAWERSI suggests owning more than one block so a cold one is always ready.
SHINFARE Heat Press Pillows and Pads Kit: Best for pillow and ruler combo
- 4 pillows 5x5, 10x10, 12x12, 5x15 in
- 5 shirt rulers 10 in long
- Teflon-coated surfaces
- Fire-resistant foam cores
Four pillows sized for pockets, sleeves and full backs, paired with five rulers for alignment on uneven garments.
Pros
- Pillow shapes cover sleeves and pockets
- Five ruler widths
- Teflon surfaces resist sticking
Cons
- No Teflon sheets or tape
- Fewer pieces than larger kits
The SHINFARE Heat Press Pillows and Pads Kit suits makers who want pillows and rulers together instead of buying them apart. Four Teflon-coated pillows measure 5 x 5 in, 10 x 10 in, 12 x 12 in and 5 x 15 in.
The long 5 x 15 in pillow fits sleeve designs, while the 12 x 12 in pillow fits full back prints. The 5 x 5 in pillow covers pocket logos, and the 10 x 10 in pillow sits in the middle for most chest designs, so the set covers a wide range without gaps.
Five shirt rulers run 10 in long in widths from 2.5 in to 6 in. The clear guides have collar notches and etched measurements.
You can center a design in seconds without guessing by eye. Laser etched markings are meant not to fade, which helps when you use the same ruler across many shirts in different colors.
The pillows use heat-resistant Teflon surfaces over fire-resistant foam cores. SHINFARE says the foam creates a flat surface for hoodies, canvas bags and baby clothes.
That flat surface helps transfers sit evenly over seams. It also helps prevent ghosting and uneven transfers on stubborn seams.
The trade-off is protection extras. There are no Teflon sheets or heat tape in this kit, so you will add those separately.
At nine pieces, it is also leaner than the larger starter bundles here.
HTVRONT Heat Press Accessories: Best for 15 x 15 machines
- 55 pack supplies
- Made for 15 x 15 in machines
- Vinyl and sublimation bundle
- Tools and mat included
A 55 piece starter bundle with vinyl, sublimation paper, rulers, weeding tools and a mat for 15 x 15 in presses.
Pros
- Large piece count for starters
- Sized for 15 x 15 presses
- Includes vinyl and paper
Cons
- Consumables will run out
- No pillows or cooling block
The HTVRONT Heat Press Accessories kit suits shoppers with a 15 x 15 in press who want consumables and tools together. This 55 pack bundle includes PU heat transfer vinyl, sublimation paper, T-shirt rulers, weeding hooks and a mat.
Cricut owners can compare heat press mats for Cricut when they need a separate pressing surface.
You can start personalizing fabric without a separate shopping trip for basics. That one-box approach helps if you are new to vinyl cutting, because you have material, paper and hand tools ready before your first press.
If you prefer pre-made designs, compare ready-to-press heat transfers.
HTVRONT says the kit works with automatic and manual 15 x 15 in machines. The sizes line up with that platen, so sheets and material fit the work area.
Rulers and weeding tools help you place and clean designs before pressing. The mat gives you a stable surface for cutting and weeding, which keeps small details from shifting before transfer.
The value is convenience. One box covers vinyl, paper and hand tools, which saves time for higher volume work.
The materials are aimed at designs that should hold up to washing and wear. The trade-off is reuse.
Vinyl and sublimation paper are consumables, so they run out with use. There are no pressing pillows or cooling blocks, so uneven garments and DTF cooling still need extra tools.
At 2.68 lb, the bundle is also heavier to store than a rulers-only kit.
DNSGOOR Sublimation Shirts Tool Kits for Vinyl: Best for platen protection
- 12 T-shirt rulers
- 2 platen wrap covers 16 x 20 in
- 3 Teflon sheets 12 x 16 in
- Heat resistant tape and gloves
A 57 count kit centered on 12 rulers, two 16 x 20 in Teflon platen covers and three 12 x 16 in Teflon sheets for vinyl and sublimation.
Pros
- Platen covers protect the press plate
- 12 rulers for round and V necks
- Includes gloves and tape
Cons
- No pressing pillows
- Cover heat limit is 500 F
The DNSGOOR Sublimation Shirts Tool Kits for Vinyl suit makers who worry about ink and residue on the platen. Two Teflon platen wrap covers measure 16 x 20 in and slip over the plate to catch stray ink.
DNSGOOR says the covers resist heat to 500 F and have a stretchy polyester back for a snug fit. Unlike a loose sheet you place over a design, a wrap cover stays on the plate itself, so it guards the machine during every press.
Twelve PVC rulers cover round neck and V neck shirts. The rulers are soft, light and printed with UV markings that stay visible.
You line a ruler at the collar to center a design before pressing. Their small size and light weight also make them easy to carry between a home sewing space and a business workspace.
Three Teflon sheets measure 12 x 16 in for use over designs during pressing. The kit also adds heat resistant tape, sublimation pencils, positioning pins, scrapers, a film cutting knife and heat resistant gloves with silicone bumps.
The trade-off is pillow coverage. There are no pressing pillows for seams or zippers.
The 57 count total also includes many small tools, so check that you will use the scrapers and knife often enough to justify the bundle.
Luxiys HTV Cooling Block with Handle: Best for DTF transfers
- 4 x 4 in cooling surface
- Aluminum alloy handle
- Rated from 200 C down to 80 C
- For DTF and HTV
A 4 x 4 in handled cooling block with an aluminum alloy handle, aimed at DTF and HTV work where quick cooling matters.
Pros
- Light at 9.6 oz
- Ergonomic metal handle
- Stated drop from 200 C to 80 C
Cons
- Small surface for large prints
- Chilling before use helps
The Luxiys HTV Cooling Block with Handle suits DTF users who need a light, handled cooler for small prints. Its cooling surface measures 4 x 4 in, which fits pocket logos, small chest designs and heat transfer paper tasks.
The aluminum alloy handle uses an ergonomic shape for a comfortable grip. That design keeps your hand away from the hot block while you apply even pressure across the transfer.
Luxiys says the block can drop a surface from 200 C to around 80 C. The lower temperature rating is 80 C and the upper rating is 200 C.
Storing the block in a fridge before use gives a colder start for repeat presses. The block keeps a transfer flat while it cools, which helps with DTF film and HTV and can improve workflow efficiency during a run of similar designs.
The block fits bags, bottles, caps, pillows, mugs and T-shirts, so it suits the same mix of garments and blanks as the other cooling block here. At 9.6 oz, it is lighter than the HAWERSI block at 1.32 lb, which makes it easier to move across a design.
The trade-off is surface size and chill time. A 4 x 4 in block needs several passes on a large design, and a second block helps during back to back presses.
Luxiys backs the block with a 1 year manufacturer warranty.
How to compare heat press accessories for your press
Use the guide below to match each tool type to the problem it solves. Compare sheet and pillow sizes to your platen first.
Then check temperature ratings against the transfers you plan to use.
| Product | Best for | Pieces | Teflon sheet size | Heat tape size | Our score |
|---|---|---|---|---|---|
| tietoc 18Pcs Sublimation Accessories | centered designs | 18 | 16 x 20 in | 0.4 in x 108 ft | 9.7 |
| Eorbow 8 Pack Heat Press Pillow Mat | seams and zippers | 8 | 9.6 | ||
| HAWERSI HTV Cooling Block with Handle | faster cooling | 9.4 | |||
| SHINFARE Heat Press Pillows and Pads Kit | pillow and ruler combo | 9 | 9.1 | ||
| HTVRONT Heat Press Accessories | 15 x 15 machines | 55 | 8.9 | ||
| DNSGOOR Sublimation Shirts Tool Kits for Vinyl | platen protection | 12 x 16 in | 8.7 | ||
| Luxiys HTV Cooling Block with Handle | DTF transfers | 8.4 |
We compared these seven picks by piece count, included tools, sizes and stated heat limits. We also checked which items solve alignment, which solve uneven surfaces and which speed cooling.
A kit that covers more steps ranks higher for beginners.
Storage matters more than most buyers expect. Pillows and cooling blocks take more drawer space than tape and rulers.
Measure your storage before you buy a large bundle.
Matching temperature ratings to your transfers
Check each rating before you pair a tool with a transfer type. The tietoc Teflon sheets resist heat to 600 degrees, while its heat tape resists heat to 250 C.
The Eorbow pillows and PTFE coating are rated to 220 C. The DNSGOOR platen covers resist heat to 500 F, which is a lower stated limit than the tietoc sheets.
The Luxiys block is rated from 200 C down to 80 C, which describes cooling range rather than heat resistance for pressing. Match the lowest rated part of your setup to the temperature your transfer requires, and keep tape, sheets and pillows within their stated limits during each press.
What accessories do you need first for a heat press?
Start with rulers, Teflon sheets and heat tape for most home projects. Those three types handle centering, platen protection and holding transfers steady.
You can press many simple designs with just that set.
Alignment tools for centered designs
Rulers help you repeat a placement across many shirts. The tietoc and SHINFARE kits include several ruler sizes for different necklines and design widths.
Pick a ruler you can read against your garment color.
Our guide to What Accessories Do You Need for a Laser Engraver? covers a different workflow, but the same logic applies here. Buy the tools you will use on every project first.
Protection tools for the platen
Teflon sheets protect both the design and the press plate. The DNSGOOR platen covers go further by wrapping the plate itself.
Use a sheet over sublimation designs to stop ink from reaching the plate.
Keep sheets clean by wiping residue off after each press. A clean sheet releases more easily and lasts longer.
Tape for holding transfers
Heat tape holds sublimation paper and small vinyl pieces in place. Check the tape width and roll length against your design size.
The 0.4 in tietoc tape and the 0.3 in Eorbow tape suit different hands and design sizes.
How do pressing pillows help with seams and zippers?
Pressing pillows help when a design crosses a seam, zipper or thick hem. The pillow fills the gap under the fabric so pressure stays even.
That even pressure reduces pale spots and ghosting on sublimation.
Pillow sizes for different designs
Choose a pillow a little larger than your design area. The Eorbow 6.3 x 5.7 in pillow fits a small logo, while its 15.5 x 13 in pillow fits a full chest print.
SHINFARE adds a 5 x 15 in pillow for sleeves.
Care for Teflon-coated pillows
Wipe pillows with a damp cloth after a press to remove glue or wax. The non-stick PTFE surface should release residue with a light wipe.
Store pillows flat so the foam keeps its shape.
How do cooling blocks improve HTV and DTF work?
Cooling blocks help when a transfer must cool before peeling or pressing again. The block draws heat away from the design surface.
That faster cooling can shorten the wait between steps.
When to chill a cooling block
Chill the HAWERSI or Luxiys block in a fridge before a run of presses. A colder block absorbs more heat on the first pass.
Keep a second block ready if you press back to back.
Block size and coverage
A 4 x 4 in block covers small designs well but needs several passes on large prints. Move the block in slow strokes across a big design.
Work in sections and keep the handle moving steadily.
Which starter kit covers the most ground?
Choose a starter kit when you need vinyl, paper, rulers and hand tools in one box. The HTVRONT 55 pack fits 15 x 15 in presses and covers consumables.
The DNSGOOR kit focuses more on protection with platen covers and sheets.
Kits for 15 x 15 in presses
Match kit sheet sizes to your platen size before you buy. A 16 x 20 in sheet fits a 15 x 15 in press with room to spare.
Smaller 12 x 16 in sheets suit smaller platens or layered work.
Kits for garment protection
The DNSGOOR kit protects the platen with wrap covers rated to 500 F. The tietoc kit protects designs with 16 x 20 in Teflon sheets rated to 600 degrees.
Pick the protection style you need most.
What setup and storage help accessories last longer?
Store rulers flat and keep sheets away from sharp tools. Wipe Teflon sheets and pillow surfaces after each session.
Clean tape residue off sheets before it builds up.
Cleaning supplies for your press area
Keep your workspace clean with the same care you would use for Best Cleaning Supplies For Laser Engraver tasks, adapted to heat press use. A clean platen and clean sheets help transfers release well.
Workspace setup with tables and carts
A stable table helps you center designs without moving the garment. Our best heat press table guide covers work surfaces for home presses.
A sturdy cart also helps if you move between rooms.
The best htvront heat press table suits HTVRONT owners who want a matched setup. A best heat press cart adds storage for pillows and blocks.
A best heat press cover protects the press when you are not using it.
Alignment help for precise placement
A heat press with laser can help with placement on some models. A heat press laser alignment system adds guided positioning for repeat work.
Rulers still help when you press on garments without a laser guide.
The verdict on the best heat press accessories
Pick the tietoc 18Pcs kit if you want rulers, sheets and tape in one box. Pick the Eorbow pillows if seams and zippers cause your failed transfers.
Pick the HAWERSI or Luxiys block if DTF or HTV cooling slows your workflow.
Pick the SHINFARE kit if you want pillows and rulers together. Pick the HTVRONT bundle if you need vinyl and paper for a 15 x 15 in press.
Pick the DNSGOOR kit if platen protection matters most.
Start with the tools you will use on every shirt. Add pillows for uneven garments and a cooling block for repeat HTV or DTF work.
That order builds a practical kit without filling a drawer with tools you rarely use.
Our top 3 picks at a glance
Frequently asked questions
What heat press accessories do beginners need first?
Start with alignment rulers, Teflon sheets and heat resistant tape. Those three types help you center designs, protect the platen and hold transfers in place.
Add pressing pillows next if you press over seams, zippers or thick garment edges.
Do I need a cooling block for HTV?
A cooling block is optional for many HTV jobs, but it helps when a design must cool before peeling or layering. The 4 x 4 in blocks here cover small to medium areas.
Chill the block first and keep a second one ready for repeat presses.
Are pressing pillows worth it for T-shirts?
Yes, if your designs cross seams, collars or zippers. A pillow creates a flatter surface so pressure reaches the fabric evenly.
Choose a size a little larger than the design, and move it under the garment area you are pressing.
How do I choose between a kit and single tools?
Choose a kit when you need several basics at once and want matching sizes. Choose single tools when you already own rulers or sheets.
Check piece counts, sheet sizes and tape lengths against your press size before you buy.
About this guide: Our look at heat press tools and pressing supplies draws on maker specs, materials and what owners report. See how we research.



