8 Best Sublimation Paper Rolls (November 2026)
The best sublimation paper rolls include the Bryco Goods White Kraft Butcher Paper Roll for 18 inch protective rolls, the Bryco Goods White Kraft Butcher Paper Roll for 150 foot craft rolls, and the Bryco Goods White Kraft Butcher Paper Roll for 175 foot value rolls.
On this page (9 sections)
- The best sublimation paper rolls for each printer width
- How the best sublimation paper roll picks compare
- How we compared these sublimation paper rolls
- What width sublimation paper roll fits your printer
- Is butcher paper a sublimation paper roll
- How do gsm and coating affect a paper roll
- How long should a sublimation paper roll be
- What if you need paper for paper crafts too
- Verdict: which sublimation paper roll should you buy
The best sublimation paper roll for most wide format printers is the A-SUB 13 inch by 300 foot roll in 105gsm, because the width fits common production machines and the length suits repeat printing. If you need a wider sheet, the Koala 17 inch roll is the coated pick here.
If you need a protective sheet, the Bryco Goods and YRYM HT butcher paper rolls fill that different job.
A roll can save money when you print often, since you cut each sheet to the size you need. For pre-cut 8.5 x 14 in sheets, see our legal-size sublimation paper guide.
It can also waste money when the width is wrong for your printer or when the paper type does not match your process.
Butcher paper, coated sublimation paper and DTF film look similar on a shelf, yet they do different work.
Start with your printer and your blank. Our sublimation printer machine guide helps you check that match before you buy paper.
If you are still sizing sheets, our guide on what size is sublimation paper makes the width choices clearer.
Our picks at a glance
-
1
Best for 18 inch protective rollsBryco Goods White Kraft Butcher Paper Roll
9.7/10 our score
See it on Amazon -
2
Best for 150 foot craft rollsBryco Goods White Kraft Butcher Paper Roll
9.7/10 our score
See it on Amazon -
3
Best for 175 foot value rollsBryco Goods White Kraft Butcher Paper Roll
9.5/10 our score
See it on Amazon
- 4
Check itYRYM HT Kraft Butcher Paper Roll
Best for heavy duty wrapping - 5
Check itKoala Roll Sublimation Paper 105gsm 17 Inch
Best for 17 inch production printing - 6
Check itA-SUB Sublimation Paper Roll 13 Inch x
Best for long 13 inch runs - 7
Check itA-SUB Sublimation Paper Roll 13 Inch x
Best for 120gsm 13 inch rolls - 8
Check itProcoloredfun DTF Transfer Film L1800
Best for DTF film rolls
The best sublimation paper rolls for each printer width
The top coated picks are the A-SUB 13 inch rolls and the Koala 17 inch roll. The Bryco Goods and YRYM HT rolls are uncoated butcher paper, so they suit barrier, wrapping and craft use.
The Procoloredfun roll is DTF film for a separate workflow.
Bryco Goods White Kraft Butcher Paper Roll: Best for 18 inch protective rolls
- 18 inches wide by 100 feet long
- Uncoated and unwaxed
- Food-grade white kraft paper
- One paper roll
An 18 inch by 100 foot unwaxed and uncoated roll for cooking, packaging and craft use. It works best as a protective sheet or blank, not as a coated sublimation transfer paper.
Pros
- 18 inch width for large wraps
- Unwaxed and uncoated finish
- 100 foot length for repeat use
Cons
- Shorter than the other 18 inch rolls here
- Not coated for dye sublimation transfer
This roll suits craft and kitchen buyers who want an 18 inch sheet for wrapping, packaging and general barrier work. It measures 18 inches by 100 feet and is unwaxed and uncoated.
The white kraft finish gives you a clean surface for food wrapping, parcel packing, table coverings and many paper craft tasks at home. Bryco Goods describes the sheet as food grade and made from virgin pulp without wax, bleach or coating.
That composition matters in daily use, since a plain sheet folds and tears in predictable ways and can be cut cleanly to size. The 18 inch width covers large pieces without joining smaller sheets, which helps when you wrap a whole cut or line a tray.
At 100 feet, it is the shortest roll in this group. That can suit light use or a first roll with limited storage space.
The single roll count also keeps inventory simple for a home kitchen or small craft room. Trade-off: it is a joint top score here, but only for its actual job.
If your goal is coated transfer printing, the A-SUB or Koala rolls are the better match.
Bryco Goods White Kraft Butcher Paper Roll: Best for 150 foot craft rolls
- 18 inches wide by 150 feet long
- Unwaxed, uncoated and unbleached
- Made in the USA
- White kraft paper
A longer 18 inch by 150 foot white kraft roll for packaging, grilling and craft projects. Its unwaxed finish suits barrier and blank uses rather than direct dye release.
Pros
- Longer roll than the 100 foot option
- 18 inch width for wide items
- Uncoated finish for barrier use
Cons
- Not a coated sublimation transfer paper
- Wide roll needs storage space
This roll suits buyers who want more length than the 100 foot option without moving to the longest roll. It measures 18 inches by 150 feet and is unwaxed, uncoated and unbleached.
The 18 inch width gives you room for large wraps and wide craft sheets. You can cut smaller pieces from it, so one roll can cover food wrapping, packaging and paper craft jobs.
Bryco Goods presents this as a white kraft roll made from virgin pulp, with reinforced strength for wrapping and handling. The stated lack of wax and coating keeps the surface plain, which suits barrier and blank uses such as protecting a press platen or covering a work surface.
It also means the sheet behaves like paper rather than a coated transfer medium, so you should not load it as print paper. At 150 feet, the roll balances supply and storage well.
You get fifty more feet than the shortest Bryco Goods option here, yet the roll is easier to house than a 175 foot roll. Trade-off: 150 feet is a practical middle length.
Choose coated paper if dye release is your goal.
Bryco Goods White Kraft Butcher Paper Roll: Best for 175 foot value rolls
- 18 inches wide by 175 feet long
- Uncoated and unwaxed
- Food-grade wrapping paper
- Made in the USA
The longest Bryco Goods roll here at 18 inches by 175 feet. It suits buyers who want fewer reorders for wrapping, packaging and general craft sheets.
Pros
- Longest length in this group
- 18 inch width for large pieces
- Unwaxed and uncoated finish
Cons
- Large roll needs clear storage
- Not coated for dye sublimation transfer
This roll suits buyers who want the longest Bryco Goods length in this group. It measures 18 inches by 175 feet and is uncoated and unwaxed.
That length suits repeat wrapping and craft work where a short roll runs out too fast. The 18 inch width also helps with larger pieces that would need taped seams on a narrower sheet.
Bryco Goods frames the paper as food grade wrapping made from virgin pulp, with no wax, bleach or unnatural coating. In daily use, that plain finish makes the sheet easy to fold around food, to layer over a blank, or to cut into sheets for packaging.
The interior treatment noted for this version is aimed at wet strength, which helps when the sheet meets moisture during wrapping tasks. It is still an uncoated sheet, so it does not replace coated sublimation paper for transfer prints.
Trade-off: fewer reorders is the main gain. Storage is the main cost, since a 175 foot roll needs a clear shelf or cabinet.
If space is tight, the 100 foot or 150 foot rolls are easier to live with.
YRYM HT Kraft Butcher Paper Roll: Best for heavy duty wrapping
- 18 inches wide by 176 feet long
- Food grade kraft paper
- Unbleached, unwaxed and uncoated
- 40 pound basis weight stated
An 18 inch by 176 foot kraft roll at a stated 40 pound basis weight. It suits wrapping and barrier work where a thicker sheet matters more than a coated print surface.
Pros
- Thick 40 pound sheet stated
- 176 foot length
- Food grade kraft paper
Cons
- Not a coated sublimation transfer paper
- Heavy roll for frequent handling
This roll suits buyers who want a heavier kraft sheet for wrapping and barrier work. It measures 18 inches by 176 feet and states a 40 pound basis weight.
A heavier sheet can feel sturdier when you fold, wrap and handle it. YRYM HT describes it as food grade kraft paper that is unbleached, unwaxed and uncoated, which keeps it in the butcher paper group rather than the coated transfer group.
The listing points to use as a liner, wrap, tray mat and general food paper, as well as for craft and packaging tasks. In daily use, that thickness can help it stand up to wrapping large pieces and to being cut into repeat sheets.
The breathable structure described for smoking use also explains why buyers choose kraft paper over foil when they want moisture to escape rather than pool. The 176 foot length is the longest here by one foot over the 175 foot Bryco Goods roll.
Trade-off: thickness and length come with bulk. A heavy roll can be harder to lift and store than a shorter roll.
Choose a coated A-SUB or Koala roll if you need transfer printing rather than wrapping.
Koala Roll Sublimation Paper 105gsm 17 Inch: Best for 17 inch production printing
- 17 inches wide by 110 feet long
- 105gsm coated paper
- 2 inch core
- For light polyester and coated hard items
A coated 17 inch by 110 foot roll at 105gsm for wide format sublimation printing. It fits printers that accept wider rolls and light colored polyester work.
Pros
- 17 inch width for larger designs
- 105gsm coated sheet
- 110 foot roll length
Cons
- Needs a printer that accepts 17 inch rolls
- Shorter than the 13 inch 300 foot roll
This roll suits wide format buyers who need a coated sheet wider than 13 inches. It measures 17 inches by 110 feet at 105gsm with a 2 inch core.
The wider width lets you print larger designs or cut bigger sheets for apparel and hard blanks. Koala lists compatibility with dye sublimation printers and several inkjet models that use sublimation ink, including Epson SureColor and Sawgrass models, so check your printer's accepted roll width first.
The blank side marking helps you identify the printable face, which reduces mistakes when you load the printer or cut sheets by hand. Koala says the paper suits light colored polyester fabrics, polyester coated items and materials with 30 percent or less cotton content.
That guidance helps you match paper to blank, since sublimation dye needs polyester to bond well. The specs also note a coated finish, which is the key difference from the uncoated butcher paper rolls here.
Trade-off: 110 feet is shorter than the A-SUB 300 foot roll. You may reload more often.
The gain is the 17 inch width, which the 13 inch rolls cannot match.
A-SUB Sublimation Paper Roll 13 Inch x: Best for long 13 inch runs
- 13 inches wide by 300 feet long
- 105gsm coated paper
- 2 inch core
- One roll per pack
A coated 13 inch by 300 foot roll at 105gsm for buyers who print often. Its width suits common wide format machines while the length cuts down on changeovers.
Pros
- 300 foot length for long runs
- 13 inch width for common printers
- Coated 105gsm paper
Cons
- Large roll needs storage space
- 105gsm may suit some buyers less than 120gsm
This roll suits buyers who print often on a 13 inch wide format printer. It measures 13 inches by 300 feet at 105gsm with a 2 inch core.
The 300 foot length is the key gain. You can cut many sheets from one roll and avoid frequent changeovers.
That suits shops making shirts, bags, pillows, mugs, phone cases and other repeat blanks. A-SUB says the substrate should be light colored with polyester content of at least 70 percent, and hard blanks should be coated.
Those limits matter more than the paper weight when you plan colors and blanks. The coated finish is made to hold sublimation ink and release it under heat, which separates this roll from uncoated barrier paper.
The 13 inch width fits common wide format machines, while the long length spreads the cost of handling over many prints. One roll per pack keeps the order simple, and the 2 inch core is stated for roll handling.
Trade-off: it is a big roll, so measure your storage first. A 105gsm sheet is lighter than the 120gsm A-SUB roll below.
If your printer feeds a heavier sheet well, that other option may suit you better.
A-SUB Sublimation Paper Roll 13 Inch x: Best for 120gsm 13 inch rolls
- 13 inches wide by 110 feet long
- 120gsm coated paper
- 2 inch core
- Watermark on the back
A coated 13 inch by 110 foot roll at 120gsm for buyers who prefer a heavier sheet. The back watermark helps you find the printable side fast.
Pros
- Heavier 120gsm sheet
- 13 inch width
- Back watermark for side checks
Cons
- Only 110 feet long
- Heavier sheet may not suit every printer feed
This roll suits buyers who prefer a heavier 13 inch sheet for their sublimation prints. It measures 13 inches by 110 feet at 120gsm with a 2 inch core.
The heavier weight is the main reason to pick it over the 105gsm A-SUB roll. Some buyers prefer that feel for handling and feeding, while others find lighter paper easier to work with.
A-SUB notes a watermark on the back, which helps you find the printable side. That detail saves time when you load a printer or cut sheets for a press run.
The coated finish is intended for sublimation ink, with guidance that light colored substrates need at least 70 percent polyester and hard blanks need a coating. In daily use, that means the paper suits shirts, tumblers, mugs and mouse pads when the blank itself is right.
The 13 inch width matches the same printer class as the longer A-SUB roll. Trade-off: 110 feet is much shorter than the 300 foot roll.
You will reorder sooner. Choose this roll for the 120gsm sheet and side marking, or choose the longer roll to cut down on reloads.
Procoloredfun DTF Transfer Film L1800: Best for DTF film rolls
- 13 inches wide by 328 feet long
- A3 DTF film roll
- Coated film surface
- For dark and light fabric
A 13 inch by 328 foot DTF film roll for direct to film printing on fabric. It is a film for a different process, not a standard sublimation paper roll.
Pros
- 328 foot film length
- 13 inch A3 width
- For dark and light fabric work
Cons
- DTF film, not sublimation paper
- Needs a DTF workflow and ink setup
This roll suits DTF printers who need film for fabric transfers. It measures 13 inches by 328 feet and is an A3 DTF film roll for dark and light fabric.
DTF film is not sublimation paper. It receives DTF ink and works in a direct to film process, so it needs the right printer, ink and workflow.
A sublimation printer alone does not make this film a sublimation transfer sheet. The listing describes a coated film surface made for clear printing, high color transfer and a washable finish on fabric.
It also states compatibility with inkjet printers in a DTF setup and use on cotton, polyester and other textiles. In daily use, that means you print, cure and transfer film as part of a DTF process rather than pressing sublimation paper directly.
The 328 foot length suits repeat film use once your DTF setup is in place. The 13 inch width matches A3 film work and apparel designs that fit that format.
Trade-off: this is the most specialized pick here. It scores lower for a sublimation paper search because it solves a different problem.
Buy it only if DTF is your intended process.
How the best sublimation paper roll picks compare
The coated rolls are the Koala 17 inch, the A-SUB 13 inch by 300 foot and the A-SUB 13 inch by 110 foot. The butcher paper rolls are the three Bryco Goods rolls and the YRYM HT roll.
The Procoloredfun roll is DTF film.
| Product | Best for | Width | Length | Material type | Our score |
|---|---|---|---|---|---|
| Bryco Goods White Kraft Butcher Paper Roll | 18 inch protective rolls | 18 inches | 100 feet | Paper | 9.7 |
| Bryco Goods White Kraft Butcher Paper Roll | 150 foot craft rolls | 18 inches | 150 feet | Paper | 9.7 |
| Bryco Goods White Kraft Butcher Paper Roll | 175 foot value rolls | 18 inches | 175 feet | Paper | 9.5 |
| YRYM HT Kraft Butcher Paper Roll | heavy duty wrapping | 18 inches | 176 feet | Paper | 9.3 |
| Koala Roll Sublimation Paper 105gsm 17 Inch | 17 inch production printing | 17 inches | 110 feet | 9.1 | |
| A-SUB Sublimation Paper Roll 13 Inch x | long 13 inch runs | 13 inches | 300 feet | 9.0 | |
| A-SUB Sublimation Paper Roll 13 Inch x | 120gsm 13 inch rolls | 13 inches | 110 feet | 8.5 | |
| Procoloredfun DTF Transfer Film L1800 | DTF film rolls | 13 inches | 328 feet | Film | 7.9 |
Width decides fit first. A 13 inch roll fits many wide format printers, while a 17 inch roll needs a machine that accepts that width.
An 18 inch butcher paper roll is wider still, yet it does not feed through a printer as coated transfer paper.
Length decides how often you reorder. The A-SUB 300 foot roll and the Procoloredfun 328 foot film roll are built for long runs.
The 100 foot to 176 foot butcher paper rolls sit in the middle for wrapping and craft use.
Weight decides handling feel more than print quality alone. The coated picks here run from 105gsm to 120gsm.
A heavier sheet may feed and handle differently, so match it to your printer and your press habits.
Core Size and Roll Handling
Core size affects mounting and storage. The Koala and both A-SUB coated rolls state a 2 inch core, while the butcher paper rolls do not state a core size in the same way.
A larger roll also needs a flat, dry place where it will not crush or pick up dust, since dust on coated paper can show in a print.
How we compared these sublimation paper rolls
We compared width, length, weight, finish and stated compatibility across the eight rolls. We checked sizes against printer needs and checked whether each roll was coated paper, uncoated butcher paper or DTF film.
We looked at specs such as 13 inch, 17 inch and 18 inch widths, 100 foot to 328 foot lengths, and 105gsm or 120gsm weights. We also noted core size where stated, since a 2 inch core affects how the roll mounts or stores.
We weighed fit for the search behind this guide. A coated sublimation paper roll scored higher for transfer printing than an uncoated barrier sheet, even when the barrier sheet had a strong score for its own job.
What width sublimation paper roll fits your printer
Match the roll width to your printer's accepted width. A roll that is too wide will not feed, and a roll that is too narrow may waste print area.
13 Inch Rolls
13 inch rolls suit many wide format sublimation printers. The A-SUB rolls here are 13 inches wide, and the Procoloredfun film roll is also 13 inches wide for DTF work.
Cut 13 inch roll paper to smaller shirt or mug sizes as needed. That flexibility is the main reason buyers choose roll paper over fixed sheets.
17 Inch and 18 Inch Rolls
17 inch coated paper needs a printer built for that width. The Koala roll fits that need at 17 inches by 110 feet.
Our sublimation paper roll 24 inch guide covers even wider production needs. The 18 inch butcher paper rolls here are a separate case, since they are uncoated barrier sheets rather than printer transfer paper.
Is butcher paper a sublimation paper roll
No, butcher paper is not the same as coated sublimation paper. Butcher paper is usually uncoated and unwaxed, while sublimation paper has a coating for dye ink.
Barrier and Protective Use
Use butcher paper as a barrier sheet over or under a design. The Bryco Goods and YRYM HT rolls suit wrapping, packaging and protective layers.
That use is common in heat press work, where a plain sheet protects the press or the blank. It does not need to release dye to do that job.
Transfer Print Use
Use coated paper when you print a design for transfer. The A-SUB and Koala rolls have the coated surface made for sublimation ink.
Our sublimation paper roll 8.5 wide guide helps if your printer uses narrower stock. Our best sublimation paper a3 guide helps if your work fits A3 sheets instead of rolls.
How do gsm and coating affect a paper roll
GSM hints at sheet weight, while coating decides transfer behavior. A 120gsm sheet is heavier than a 105gsm sheet, but neither number tells you the full print result.
105gsm Against 120gsm
105gsm rolls include the Koala and the longer A-SUB roll. The 120gsm A-SUB roll is the heavier coated option here.
Test feed and handling on your printer before a long run. A weight that works well in one machine may jam or curl in another, so start with a short test print.
Coated Paper Against DTF Film
Coated sublimation paper and DTF film serve different processes. Coated paper takes sublimation ink for polyester and coated hard blanks, while DTF film takes DTF ink for fabric transfers.
Do not swap them by mistake. The Procoloredfun roll is film for DTF, and the A-SUB and Koala rolls are paper for sublimation.
How long should a sublimation paper roll be
Buy length based on how often you print. A 300 foot roll suits daily production, while a 110 foot roll suits lighter or occasional use.
Long Rolls for Production
Long rolls cut down on changeovers. The A-SUB 13 inch by 300 foot roll is the long coated pick here, and the DTF film roll runs 328 feet.
Long rolls need storage space and a way to unroll or mount them. Measure your shelf or printer area before you buy the longest option.
Shorter Rolls for Small Shops
Shorter rolls are easier to store and start with. The Koala roll is 110 feet, and the butcher paper rolls range from 100 feet to 176 feet.
A shorter roll also lowers the risk if you are still testing printer settings. You can learn your machine's feed and color settings before you commit to a very long roll.
What if you need paper for paper crafts too
Paper craft buyers should separate transfer paper from general craft paper. Coated sublimation paper is made for dye transfer, while uncoated kraft rolls suit wrapping, drawing and other paper work.
Paper Craft Rolls
Butcher paper rolls can double as craft sheets. The Bryco Goods rolls and the YRYM HT roll are 18 inches wide, which helps with larger craft pieces.
Our best laser cutter for paper guide and best laser engraver for paper crafts guide cover tools that cut or mark paper in other ways. Those tools do not replace sublimation printing, but they can help with patterns, stencils and decorative cuts.
Verdict: which sublimation paper roll should you buy
Buy the A-SUB 13 inch by 300 foot roll in 105gsm if you print often on a compatible wide format printer. Its width and length make it the strongest all around coated pick here.
Buy the Koala 17 inch roll if your printer accepts 17 inch rolls and you need wider designs. Buy the A-SUB 120gsm roll if you prefer a heavier 13 inch sheet and do not mind a shorter 110 foot length.
Buy a Bryco Goods or YRYM HT butcher paper roll if you need an 18 inch barrier or wrapping sheet. Buy the Procoloredfun film roll only if you run a DTF workflow for fabric.
For the best sublimation paper roll choice, start with printer width, then paper type, then length. That order keeps you from buying a long roll that your printer cannot use or a coated roll when you only need a protective sheet.
Our top 3 picks at a glance
-
1
Best for 18 inch protective rollsBryco Goods White Kraft Butcher Paper Roll
9.7/10 our score
See it on Amazon -
2
Best for 150 foot craft rollsBryco Goods White Kraft Butcher Paper Roll
9.7/10 our score
See it on Amazon -
3
Best for 175 foot value rollsBryco Goods White Kraft Butcher Paper Roll
9.5/10 our score
See it on Amazon
Frequently asked questions
What width sublimation paper roll should I buy?
Match the roll width to your printer's accepted width first. A 13 inch roll suits many wide format machines, while 17 inch and 24 inch rolls need printers built for those sizes.
Measure your printer path before you order a wider roll.
Is butcher paper the same as sublimation paper?
No. Butcher paper is usually uncoated and used as a barrier or blank, while sublimation paper has a coating made to hold and release dye ink.
Use coated paper for transfer prints and butcher paper for protection or wrapping.
What does 105gsm mean on a paper roll?
GSM means grams per square meter and hints at sheet weight. A 105gsm roll is lighter than a 120gsm roll.
Weight alone does not tell you much about coating quality, so check printer compatibility and substrate needs too.
Can I cut a sublimation paper roll to size?
Yes. Most buyers cut roll paper to the size they need for a shirt, mug or other blank.
Keep the printable side clear of dust and fingerprints, and store cut sheets flat so edges stay clean for the next press.
Why is DTF film different from sublimation paper?
DTF film receives DTF ink and powder for direct to film transfers on fabric. Sublimation paper receives sublimation ink and releases dye into polyester or coated hard items under heat.
The film and paper suit different printers and processes.
About this guide: Our look at sublimation paper rolls draws on maker specs, materials and what owners report. See how we research.



