6 Best Wood Materials for Laser Inlays (October 2026)

The best laser wood inlay materials include the Mroy mio 135 PCS Laser Engraving Material for broad material exploration, the Dunzoom 257 Pcs Laser Material Kit for the largest practice assortment, and the Dunzoom 127 Pcs Laser Material Kit Engraving for a smaller mixed-material set.

On this page (9 sections)

1. How we chose laser wood inlay materials
2. Which kit gives you the most material variety?
3. Which kit has the most pieces for practice?
4. Is the smaller Dunzoom kit enough for mixed practice?
5. Which kit names the most wood species?
6. Which set includes plywood and small wood forms?
7. What does the Tondiamo kit offer for wood practice?
8. What should you check before cutting an inlay?
9. Which laser wood inlay materials should you choose?

The best laser wood inlay materials are flat, consistent woods with clear color contrast, such as light basswood paired with darker walnut. For a layered sign material with a similar color contrast, see two-tone acrylic for laser cutting.

A broad assortment can help you practice, but fitted inlays work best when you know the wood species, thickness and dimensions before cutting.

A material kit is not automatically an inlay kit. Several picks below include wood blanks or plywood, while only some name the species; none specifies a matched set of contrasting inlay stock.

Use these kits to explore and practice, then choose stock that matches the pocket you plan to cut.

For the cut-and-fit process, see How to Make Perfect Wood Inlays with Your Laser. If you are considering a different laser type, read can a uv laser cut wood inlay.

Our picks at a glance

1. 1
   Best for broad material exploration

   Mroy mio 135 PCS Laser Engraving Material

   9.7/10 our score

   See it on Amazon
2. 2
   Best for the largest practice assortment

   Dunzoom 257 Pcs Laser Material Kit

   9.6/10 our score

   See it on Amazon
3. 3
   Best for a smaller mixed-material set

   Dunzoom 127 Pcs Laser Material Kit Engraving

   9.3/10 our score

   See it on Amazon

4. 4

   Briwooody 100 Pcs Laser Material Kit Wooden

   Best for trying several wood species
   Check it
5. 5

   Longer 77pcs Laser Engraving Material Kit DIY

   Best for plywood and small wood forms
   Check it
6. 6

   Tondiamo 76 Pcs Laser Cutting Materials Explore

   Best for varied small craft blanks
   Check it

How we chose laser wood inlay materials

The best laser wood inlay materials give you identifiable wood to practice with and enough detail to judge whether it suits a fitted insert. We compared the stated wood types, forms and variety in each kit, giving more weight to named woods and wood sheets than to general mixed-material counts.

These sets vary in purpose. Some include wood among many material types, while others name species such as walnut, basswood, bamboo or pine.

None provides complete thickness details for every wood piece, so treat the kits as practice supplies and confirm dimensions before planning a precision inlay.

The score weighs the wood details and material variety against the needs of someone selecting supplies for inlay work. Higher scores here reflect broader practice options and more useful stated wood information, not a claim that the set is ready-made inlay stock.

Which kit gives you the most material variety?

The Mroy mio kit has the widest stated material range, with 135 pieces across 27 types. Wood and bamboo are included, making it a flexible practice set if you also want to explore engraving on other materials.

1

Mroy mio 135 PCS Laser Engraving Material: Best for broad material exploration

9.7/10Our score

• 135 pieces
• 27 material types
• Includes wood, bamboo, acrylic, fabric, stone and paper

A wide mix of materials makes this kit useful for exploring laser projects. It includes wood and bamboo, though it is not focused on matched inlay stock.

See it on Amazon

Pros

• Broad range of material types
• Includes wood and bamboo
• Useful for varied practice

Cons

• Does not specify the types or thicknesses of wood

Its strength is variety rather than a wood-focused selection. The named material types include wood and bamboo alongside acrylic, fabric, rock, paper, silicone and other materials.

For another fabric material used in laser projects, see stiff felt for laser cutting.

The key limitation for inlays is that the wood species and thicknesses are not identified. That makes the kit more useful for general experiments than for choosing a specific light-and-dark pairing.

For a fitted insert, source the base and inlay stock separately when you need predictable dimensions.

Choose this set if you want one assortment for a range of laser craft practice. If your priority is a defined mix of wood species, the Briwooody set below gives more useful names for comparing color.

Which kit has the most pieces for practice?

The Dunzoom 257-piece kit has the highest stated count in this roundup, spread across 26 different items and 8 material types. Wood is one of those types, alongside materials such as acrylic, metal, fabric and glass.

For metal engraving projects, compare metal blanks for laser engraving.

2

Dunzoom 257 Pcs Laser Material Kit: Best for the largest practice assortment

9.6/10Our score

• 257 pieces
• 26 different items
• Includes wood among 8 material types

The high piece count offers plenty of varied laser practice material, including wood. The wood species and thicknesses are not specified.

See it on Amazon

Pros

• Largest stated piece count here
• Includes wood
• Covers cutting and engraving materials

Cons

• Does not specify wood species or thickness

The quantity can suit a beginner who wants to try a range of cutting and engraving projects without gathering every blank separately. Its wood content is not broken down by species or thickness, though, so the piece count alone does not tell you how many pieces suit inlay practice.

Use the kit to explore designs and basic material handling, then check the dimensions of any wood piece you want to use in a fitted project. A large mixed set can offer more chances to practice, but it cannot replace stock selected for a particular pocket depth or contrast.

Is the smaller Dunzoom kit enough for mixed practice?

The 127-piece Dunzoom set gives you a smaller mixed-material assortment with 17 item types and wood among its 7 materials. It can be a better fit when you want variety without the larger set’s stated piece count.

3

Dunzoom 127 Pcs Laser Material Kit Engraving: Best for a smaller mixed-material set

9.3/10Our score

• 127 pieces
• 17 different items
• Includes wood among 7 material types

This smaller Dunzoom assortment still includes wood for practice alongside several other material types. It does not identify the wood species or sheet dimensions.

See it on Amazon

Pros

• Fewer pieces than the 257-piece set
• Includes wood and mixed materials
• Suitable for varied DIY projects

Cons

• Wood details are not specified

The range includes wood, metal, fabric, PU leather, glass, rock and rubber. The wood species and dimensions are not specified, so plan to inspect each piece before using it for a tight-fitting inlay.

Its main value is trying varied laser projects with one kit. It is less useful when you need a known wood pairing, such as a named pale species and a named dark species in consistent sheet thicknesses.

For that job, use the species names in the Briwooody set as a starting point, then buy or cut stock to the dimensions your design needs.

Which kit names the most wood species?

The Briwooody 100-piece kit is the clearest choice for comparing named wood types because it identifies beech, walnut, basswood, bamboo and pine. It also includes wooden keychains and basswood plywood.

4

Briwooody 100 Pcs Laser Material Kit Wooden: Best for trying several wood species

9.1/10Our score

• 100 pieces
• Names beech, walnut, basswood, bamboo and pine
• Includes wooden keychains and basswood plywood

Named woods give you several tones to compare for contrast and engraving practice. The kit is centered on blanks and small projects rather than matched inlay veneers.

See it on Amazon

Pros

• Names several wood species
• Includes basswood plywood
• Useful for comparing wood appearance

Cons

• Does not specify thickness for every wood piece

Those species offer a starting point for visual contrast: walnut is named alongside options such as basswood. For a closer species comparison, read poplar versus basswood strength.

The kit does not specify the thickness of every piece, so confirm the dimensions before designing an insert around a particular blank.

It is built around small blanks and project items, including keychains, basswood plywood, bamboo pens and bottle openers. That makes it useful for trying wood combinations and engraving ideas, but less direct as a source of matched veneer strips for a detailed inlay.

For more focused veneer choices, compare the advice in Best Wood Veneer For Laser Cutting. Veneer thickness and flatness matter when the insert sits in a shallow pocket.

Which set includes plywood and small wood forms?

The Longer 77-piece set identifies linden plywood, round wood blocks and pine cubes, along with acrylic and metal items. It is a practical pick for trying several wood shapes and small project blanks.

5

Longer 77pcs Laser Engraving Material Kit DIY: Best for plywood and small wood forms

8.8/10Our score

• 77 pieces
• Includes linden plywood, round wood blocks and pine cubes
• Also includes acrylic and metal items

This set identifies several useful wood forms, including linden plywood and small pine cubes. Its mixed project pieces are more suited to practice than sourcing matched veneer.

See it on Amazon

Pros

• Names linden plywood and pine
• Includes plywood sheets
• Also offers non-wood practice pieces

Cons

• Does not include a range of named contrasting veneers

The linden plywood is the most directly useful form for testing flat cuts. The set also includes small pine cubes and round wooden blocks, but those shapes are less suited to a flat, fitted inlay than sheet stock.

Longer’s material list gives more detail about the wood forms than some mixed kits, while still leaving the wood thickness and species range limited. Measure the plywood and compare it with your design before using it as a base or insert.

What does the Tondiamo kit offer for wood practice?

The Tondiamo 76-piece kit includes basswood plates and wooden keychains, giving you flat wood pieces and small blanks for practice. For larger quantities, compare bulk laser engraving blanks.

It also contains a mix of other craft materials.

6

Tondiamo 76 Pcs Laser Cutting Materials Explore: Best for varied small craft blanks

8.5/10Our score

• 76 pieces
• Includes basswood plates and wooden keychains
• Also includes PU leather, acrylic and metal

Basswood plates provide a wood option for practice, while keychains add small project blanks. The kit does not specify plate thickness or a range of wood species.

See it on Amazon

Pros

• Includes basswood plates
• Has small wood blanks
• Offers mixed-material practice

Cons

• Wood species and plate thickness are not specified

The basswood plates are the most relevant items for a flat inlay experiment. Their thickness is not specified, so measure the actual plate and confirm your laser and design can handle it before cutting a pocket.

This kit may suit someone who wants a smaller explore set with multiple item forms. It does not identify a range of wood species for contrasting inserts, so source darker or lighter stock separately when the design depends on a distinct two-tone effect.

What should you check before cutting an inlay?

Check the base and insert thickness, flatness and grain direction before cutting. For small gaps after assembly, compare wood fillers for engraving.

A close fit depends on both pieces matching the design dimensions, and uneven stock can make assembly harder.

Start with a simple shape and a small offcut from each wood type. This lets you see the cut edge and compare the finished tones before committing a larger piece.

For veneer work, make sure the sheet is suitable for your laser and keep its thickness consistent across the design. Our guide to laser cutting wood veneers covers veneer handling and cutting considerations in more detail.

A material kit can help you learn how your setup responds to different blanks, but product names alone do not guarantee laser compatibility. Check the material itself, follow your machine maker’s instructions and avoid cutting materials that are unsafe for your laser.

Which laser wood inlay materials should you choose?

Choose the Briwooody kit if you want named wood species for comparing tones, the Longer kit for identified plywood and wood forms, or Mroy mio for broad material practice. After engraving, compare wood sealers for laser engraved basswood.

For a precise fitted inlay, select the actual base and insert stock by species, thickness and flatness, then test a small offcut before cutting the final design.

For machine options suited to cabinetry, see wood lasers for cabinet inlays.

If you are still learning which materials suit different projects, Best Material For Laser Engraving Beginners offers broader starter context. For projects beyond wood, use the Safe Felt Materials for Laser Cutting: A Guide to review felt-specific material choices.

Our top 3 picks at a glance

1. 1
   Best for broad material exploration

   Mroy mio 135 PCS Laser Engraving Material

   9.7/10 our score

   See it on Amazon
2. 2
   Best for the largest practice assortment

   Dunzoom 257 Pcs Laser Material Kit

   9.6/10 our score

   See it on Amazon
3. 3
   Best for a smaller mixed-material set

   Dunzoom 127 Pcs Laser Material Kit Engraving

   9.3/10 our score

   See it on Amazon

Frequently asked questions

What wood works well for laser inlays?

Flat, consistent wood that cuts cleanly and fits the pocket works well for laser inlays. Basswood is a common choice for a light base, while walnut can provide a darker insert for contrast.

Check the thickness and flatness of both pieces before cutting.

Can veneer be used for a laser wood inlay?

Yes, veneer can work for a shallow inlay when its thickness suits the pocket and it stays flat during cutting. Match the veneer and pocket dimensions closely, since a thin insert can be harder to handle than thicker stock.

See our guide to the best wood veneer for laser cutting for veneer selection details.

Do mixed laser material kits include inlay-ready wood?

Some kits include wood, plywood or veneer-like sheets, but that does not guarantee the pieces are matched for an inlay. Check for named wood species, flat sheet stock and clear thickness information before choosing a kit for fitted work.

Mixed kits are often more useful for practicing different projects.

How do you choose contrasting wood for an inlay?

Choose woods with visibly different tones, such as a light base and a darker insert, then check that their thickness and grain suit the design. A small test cut can reveal how the cut edges and finish affect the contrast.

Keep the wood flat while measuring and fitting the insert.