Best picks

9 Best Bulk Plywood Packs for Laser Cutting (November 2026)

Updated on · By the Handyloom team

The best bulk plywood for laser cutting include the VKIZA 30 Pack Basswood Sheets 12"x12"x1/8" for steady repeat orders, the VKIZA 12 Pack Basswood Sheets for Crafts for larger sheet layouts, and the VKIZA 10 Pack Walnut Plywood Sheets 12x12x1/8 for walnut contrast.

On this page (8 sections)
  1. The best bulk plywood packs for laser cutting, compared
  2. How to compare bulk plywood for laser cutting
  3. Which sheet count is best for bulk plywood for laser cutting?
  4. Is 3mm or 6mm better in bulk packs?
  5. What size sheet should you buy in bulk?
  6. Basswood or walnut: which bulk wood should you stock?
  7. How do you store bulk plywood so it stays flat?
  8. Verdict: best bulk plywood for laser cutting

The best bulk plywood for laser cutting is the VKIZA 30 Pack Basswood Sheets 12"x12"x1/8", because 30 sheets of 12 by 12 in 3mm basswood balance volume, storage and bed fit. Choose the 54 pack if you cut daily, and choose walnut if grain contrast matters more than count.

Bulk buying only helps when the sheet matches your machine and your job queue. A large pack of the wrong size or thickness will sit in storage while you reorder the right stock.

Pale basswood takes paint and stain in a predictable way, while walnut already carries a darker face that changes how engraved lines read.

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared sheet count, size, thickness and wood type across these multipacks.

For general material choice, start with Best Plywood For Laser Cutting if you are new to plywood grades. For a closer look at smaller packs, see Best Craft Plywood For Laser Cutting.

In practice, most shops settle into a rhythm after the first order, learning how many sheets one design uses, how long a stack stays flat, and whether 3mm or 6mm matches the parts they sell.

Our picks at a glance

  1. 1 VKIZA 30 Pack Basswood Sheets 12"x12"x1/8"
    Best for steady repeat orders

    VKIZA 30 Pack Basswood Sheets 12"x12"x1/8"

    9.7/10 our score

    See it on Amazon
  2. 2 VKIZA 12 Pack Basswood Sheets for Crafts
    Best for larger sheet layouts

    VKIZA 12 Pack Basswood Sheets for Crafts

    9.7/10 our score

    See it on Amazon
  3. 3 VKIZA 10 Pack Walnut Plywood Sheets 12x12x1/8
    Best for walnut contrast

    VKIZA 10 Pack Walnut Plywood Sheets 12x12x1/8

    9.5/10 our score

    See it on Amazon
  1. 4VKIZA 54 Packs Basswood Sheets 12"x12"x1/8"Check it
  2. 5MITINU 50 Pack Basswood Sheets for Crafts

    MITINU 50 Pack Basswood Sheets for Crafts

    Best for sharing and classes
    Check it
  3. 6ESRICH 12 Pack Basswood Sheets 1/4x12x12 InchCheck it
  4. 7ESRICH 36 Pack 12x12 Basswood Sheets 1/8

    ESRICH 36 Pack 12x12 Basswood Sheets 1/8

    Best for mid size bulk runs
    Check it
  5. 8Basswood Sheets for Crafts 1/8 inch

    Basswood Sheets for Crafts 1/8 inch

    Best for careful small batches
    Check it
  6. 9FUMILE 20 Pack Basswood Sheets 1/8x12x12 InchCheck it

The best bulk plywood packs for laser cutting, compared

The top picks share one format: 12 by 12 in, 3mm basswood. That format fits most beds, cuts fast and works for models, signs and ornaments.

The differences come down to count, grain and thickness.

Two packs break that pattern on purpose. One uses a 12 by 18 in sheet for wider layouts, and one uses walnut or 6mm stock for contrast or strength.

1

VKIZA 30 Pack Basswood Sheets 12"x12"x1/8": Best for steady repeat orders

VKIZA 30 Pack Basswood Sheets 12"x12"x1/8", bulk plywood for laser cutting
9.7/10Our score
  • 30 sheets
  • 12 x 12 x 1/8 in
  • 3mm basswood plywood
  • Unfinished wood for crafts

A 30 sheet pack of 12 by 12 in 3mm basswood that fits most laser beds and repeat job queues.

See it on Amazon

Pros

  • 30 sheets for repeat jobs
  • 12 x 12 in fits common beds
  • 3mm cuts and engraves cleanly for many designs

Cons

  • Only 30 sheets for very high volume shops
  • Unfinished surface needs prep for some finishes

This VKIZA pack suits shops that cut the same designs every week and want a restock that lasts a few jobs. 30 sheets of 12 by 12 in, 3mm basswood gives enough stock for repeat orders without the storage load of a 50 plus pack.

In daily use, the 12 in square fits a bed with room to spare for pins or magnets. The listed sheet size is 12 by 12 by 0.13 in, which keeps the stack aligned when you load sheets back to back.

You can nest several small parts on one sheet, then cut the next sheet while you pack the first batch. That flow suits ornaments, house number plates, welcome signs and animal or airplane models listed for this stock.

The unfinished surface takes paint and stain, and the light basswood face engraves with clear contrast. Flat, smooth sheets without warping or burrs also help slots and tabs line up on architectural models.

The pack is described for laser cutting, engraving and wood burning, plus cutting with a utility knife, scroll saw or craft knife. That range helps when a design needs a quick trim before it goes on the bed.

Trade off: 30 sheets will not cover a high volume shop for long. If you use more than 10 sheets a week, the 54 pack will save you a reorder cycle, while a 20 pack may run out too soon for steady work.

VKIZA 30 Pack Basswood Sheets 12"x12"x1/8"Check it on Amazon
2

VKIZA 12 Pack Basswood Sheets for Crafts: Best for larger sheet layouts

VKIZA 12 Pack Basswood Sheets for Crafts, bulk plywood for laser cutting
9.7/10Our score
  • 12 sheets
  • 12 x 18 x 1/8 in
  • 3mm basswood plywood
  • Unfinished wood for crafts

Twelve larger 12 by 18 in 3mm sheets for designs that need more width than a 12 by 12 in sheet gives.

See it on Amazon

Pros

  • Larger 12 x 18 in sheet
  • 3mm thickness for detailed cuts
  • 12 sheets for smaller batches

Cons

  • Fewer sheets than bulk 12 x 12 in packs
  • Needs a bed that fits 18 in length

This VKIZA pack suits makers whose designs run wider than a 12 in square. 12 sheets at 12 by 18 in, 3mm give you a longer layout for signs, house plates and larger model parts.

In daily use, the extra 6 in of length can reduce seams on wide designs. You can place a welcome sign or a long name plate on one sheet instead of joining two squares.

The sheet is also listed as 300 by 450 by 3mm, so you can check nesting in metric units if your software uses them. Clear texture and a flat, smooth surface support detailed cuts across that longer span.

The trade off is count. Only 12 sheets means this is a batch pack, not a bulk restock for a busy shop.

It also needs a bed that clears 18 in, so measure your usable area before you order.

Unfinished basswood accepts painting, staining and writing on the surface. That helps small house building, aircraft and boat models, plus laser projects that need a plain face before finishing.

Choose it when layout width matters more than sheet count. For standard squares, the 30 pack gives more sheets in a safer size, and the 36 pack gives a mid size restock without changing format.

VKIZA 12 Pack Basswood Sheets for CraftsCheck it on Amazon
3

VKIZA 10 Pack Walnut Plywood Sheets 12x12x1/8: Best for walnut contrast

VKIZA 10 Pack Walnut Plywood Sheets 12x12x1/8, bulk plywood for laser cutting
9.5/10Our score
  • 10 sheets
  • 12 x 12 x 1/8 in
  • 3mm walnut plywood
  • Unfinished wood for crafts

Ten 12 by 12 in 3mm walnut sheets for projects where darker grain does the visual work.

See it on Amazon

Pros

  • Walnut grain for contrast
  • 12 x 12 in standard size
  • 3mm for engraving detail

Cons

  • Only 10 sheets
  • Darker face shows scorch more than pale basswood

This VKIZA walnut pack suits projects where pale basswood looks too plain. 10 sheets of 12 by 12 in, 3mm walnut plywood give a darker grain that makes engraved lines and cut edges stand out.

In daily use, walnut works well for greeting cards, small boxes and gift items. The 3mm thickness keeps cuts fast, and the walnut face texture adds visual interest without paint.

Each sheet is listed at about 30 by 30cm, and the pack is described as smooth, sturdy, lightweight, straight and free of burrs. Those traits matter for laser cutting, engraving, crimping and knife work on the same stock.

The trade off is count and contrast. Only 10 sheets makes it a specialty pack, not bulk stock.

Darker wood also shows scorch more, so test your settings on a corner first.

Walnut is listed for school projects, arts and crafts, military models and architectural models, plus wood burning and painting. That range suits holiday gifts where the grain itself becomes part of the design.

Pair walnut with Best 3mm Plywood For Laser Cutting guidance on settings. Use basswood for volume and walnut for focal pieces, and store walnut flat at a suitable temperature and humidity to prevent warping.

VKIZA 10 Pack Walnut Plywood Sheets 12x12x1/8Check it on Amazon
4

VKIZA 54 Packs Basswood Sheets 12"x12"x1/8": Best for high volume shops

VKIZA 54 Packs Basswood Sheets 12"x12"x1/8", bulk plywood for laser cutting
9.3/10Our score
  • 54 sheets
  • 12 x 12 x 1/8 in
  • 3mm basswood
  • Unfinished wood for crafts

Fifty four 12 by 12 in 3mm basswood sheets for shops cutting the same design week after week.

See it on Amazon

Pros

  • Highest sheet count here
  • 12 x 12 in standard format
  • 3mm for fast repeat cuts

Cons

  • Large stack to store flat
  • Heavier pack to handle

This VKIZA pack suits production shops with a steady weekly queue. 54 sheets of 12 by 12 in, 3mm basswood is the largest count in this group, so one order covers many repeat runs.

In daily use, plan storage first. A stack of 54 square sheets needs a flat, dry spot away from floor moisture.

Keep it weighted or in a cabinet so sheets stay flat for clean cuts.

The sheets are listed at 305 by 305 by 3mm, with a pack weight of 7.29 kg. That weight signals a stack you should split or handle with care, not a pack to drag across a workbench.

The 12 in square fits most beds, and 3mm keeps cycle time low when you cut the same file again and again. That speed matters when a shop sells the same ornament set each week.

Clear texture, flat and smooth surfaces, and resistance to warping, burrs and bending are listed for this basswood. Those details help when you run architectural models, animal models, car models and welcome signs from one stock.

Trade off: the pack is heavy and takes space. If you cut less than 10 sheets a week, a 30 pack is easier to store and fresher to use, while this pack rewards only a shop that will work through the full stack.

VKIZA 54 Packs Basswood Sheets 12"x12"x1/8"Check it on Amazon
5

MITINU 50 Pack Basswood Sheets for Crafts: Best for sharing and classes

MITINU 50 Pack Basswood Sheets for Crafts, bulk plywood for laser cutting
9.2/10Our score
  • 50 sheets
  • 12 x 12 x 1/8 in
  • 3mm basswood plywood
  • Smooth unfinished squares

Fifty smooth 12 by 12 in 3mm basswood squares for classes, clubs and production runs with spares.

See it on Amazon

Pros

  • 50 sheets for groups
  • Smooth square format
  • 3mm for models and ornaments

Cons

  • Large stack to store
  • Same 3mm limit as other basswood packs

This MITINU pack suits classes, clubs and shops that share stock. 50 sheets of 12 by 12 in, 3mm basswood give each person a sheet for a project plus spares for test cuts.

In daily use, smooth square sheets reduce setup time. You can load a sheet, run a file and hand out the next sheet without trimming a large board to size.

The sheets are listed at 12 by 12 by 0.12 in, with a pack weight of 7.23 kg. The basswood is described as having a poplar core, glued together, well polished, smooth, unwarped, straight and burr free.

The basswood face suits staining and painting after cutting, so finished pieces can go straight to a craft table. It also works for pyrography and model work between laser jobs.

This pack is aimed at both beginners and experienced makers, with cutting by scroll saw, utility knife, laser or craft knife. That tool range helps a class where people do not all start with the same equipment.

Trade off: 50 sheets is a lot to store if you work alone. Keep the stack flat and dry, and work through it before ordering again, since the 30 and 36 packs may suit a single maker who cuts less often.

MITINU 50 Pack Basswood Sheets for CraftsCheck it on Amazon
6

ESRICH 12 Pack Basswood Sheets 1/4x12x12 Inch: Best for thicker 6mm work

ESRICH 12 Pack Basswood Sheets 1/4x12x12 Inch, bulk plywood for laser cutting
8.8/10Our score
  • 12 sheets
  • 12 x 12 x 1/4 in
  • 6mm basswood
  • Unfinished wood for crafts

Twelve 12 by 12 in 6mm basswood sheets for sturdier parts that need more depth than 3mm gives.

See it on Amazon

Pros

  • Thicker 6mm stock
  • 12 x 12 in format
  • Sturdier for boxes and signs

Cons

  • Only 12 sheets
  • Needs more laser power and time than 3mm

This ESRICH pack suits makers who need more depth than 3mm gives. 12 sheets of 12 by 12 in, 6mm basswood cut into sturdier boxes, signs and structural model parts.

In daily use, 6mm will need more laser power and more time per cut than 3mm. For another material-specific setup, see laser cutting settings for cork gaskets.

Test a small shape first, and check that your machine can cut through cleanly without extra passes.

The sheets are listed at about 305 by 305mm and 6mm thick, lightweight, smooth, warp free and without burrs. That thickness is roughly double the 3mm packs, so nesting and slot design need to account for the extra depth.

The thicker sheet also holds paint and stain on edges better for larger pieces. It suits wall decor and jewelry boxes where thin stock feels fragile, plus military and architectural models.

This stock is listed for laser engraving, painting, dyeing, wood burning and pyrography. It can also be cut by scroll saw, which gives non laser users a path to use the same sheets for puzzles and name pieces.

Trade off: only 12 sheets, and slower cutting. For bulk volume, use 3mm packs and keep this as your thicker option.

Our Best Thin Plywood For Laser Cutting guide helps you compare thin stock.

ESRICH 12 Pack Basswood Sheets 1/4x12x12 InchCheck it on Amazon
7

ESRICH 36 Pack 12x12 Basswood Sheets 1/8: Best for mid size bulk runs

ESRICH 36 Pack 12x12 Basswood Sheets 1/8, bulk plywood for laser cutting
8.5/10Our score
  • 36 sheets
  • 12 x 12 x 1/8 in
  • 3mm basswood
  • Unfinished wood for crafts

Thirty six 12 by 12 in 3mm basswood sheets for a mid size bulk run without a very large stack.

See it on Amazon

Pros

  • 36 sheets for steady work
  • 12 x 12 in standard size
  • 3mm for detailed cutouts

Cons

  • Fewer sheets than 50 and 54 packs
  • No walnut contrast

This ESRICH pack suits a mid size bulk run. 36 sheets of 12 by 12 in, 3mm basswood sit between the 30 pack and the 50 plus packs in both count and storage load.

In daily use, the 12 in square nests well for ornaments, puzzles and small signs. You can cut a full sheet, then use offcuts for test engravings before you load the next sheet.

The sheets are listed at about 305 by 305mm, 3mm thick, lightweight, smooth, warp free and without burrs. The pack weight is listed at 4.95 kg, which is easier to move than the 50 and 54 sheet stacks.

The unfinished basswood takes paint, stain and laser engraving. That mix suits shops that finish pieces in several ways from the same stock, from models to ships and airplanes.

This pack is described as tool friendly for scroll sawing, laser engraving, laser cutting, knife work and wood burning. That shared use helps when one design moves from a test cut to a finished gift.

Trade off: 36 sheets is not the lowest cost per sheet in this group, and there is no walnut option. Choose it when you want a solid mid size restock without a very large stack, especially if 30 sheets feels short and 50 feels excessive.

ESRICH 36 Pack 12x12 Basswood Sheets 1/8Check it on Amazon
8

Basswood Sheets for Crafts 1/8 inch: Best for careful small batches

Basswood Sheets for Crafts 1/8 inch, bulk plywood for laser cutting
8.3/10Our score
  • 10 sheets
  • 12 x 12 x 1/8 in
  • 3mm plywood with poplar core
  • Unfinished wood for crafts

Ten 12 by 12 in 3mm sheets with a poplar core for small batch work where flatness matters.

See it on Amazon

Pros

  • Poplar core for strength
  • 12 x 12 in standard size
  • 3mm for model work

Cons

  • Only 10 sheets
  • Not a high volume pack

This SS Custom Products pack suits careful small batch work. 10 sheets of 12 by 12 in, 3mm plywood with a poplar core give strength for models and scale parts.

In daily use, flat and straight sheets matter when you cut slots and tabs. A poplar core helps thin parts hold shape for aircraft, boat and architectural models.

The sheets are listed at 12 by 12 by 1/8 in, smooth, warp free, straight and true to size. That control is aimed at makers who spend less time fixing imperfections and more time cutting.

The even grain also suits drawing, staining and painting after cutting. Beginners can cut with a laser, scroll saw or craft knife, so the same pack works across tools.

This range matters for wood burning and scale models, where a sheet may be cut, engraved and finished in one session. Careful packing is also listed to keep warping and cracking at bay during shipping.

Trade off: only 10 sheets, so it is not a bulk restock. Use it for quality small runs, and use 30 plus packs for weekly volume, while the 20 pack may be a better middle step for a growing shop.

Basswood Sheets for Crafts 1/8 inchCheck it on Amazon
9

FUMILE 20 Pack Basswood Sheets 1/8x12x12 Inch: Best for 20 sheet restocks

FUMILE 20 Pack Basswood Sheets 1/8x12x12 Inch, bulk plywood for laser cutting
8.1/10Our score
  • 20 sheets
  • 12 x 12 x 1/8 in
  • 3mm basswood
  • Unfinished wood for crafts

Twenty 12 by 12 in 3mm basswood sheets for restocks between smaller and larger bulk packs.

See it on Amazon

Pros

  • 20 sheets for restocks
  • 12 x 12 in standard size
  • 3mm for engraving and cutting

Cons

  • No larger sheet option
  • Fewer sheets than 30 plus packs

This FUMILE pack suits a simple 20 sheet restock. 20 sheets of 12 by 12 in, 3mm basswood cover a few weeks of moderate cutting without a large storage stack.

In daily use, the square format fits most beds and nests for name puzzles, small signs and model parts. The 3mm thickness keeps cuts quick for repeat designs.

The sheets are listed at about 305 by 305mm and 3mm thick, smooth, straight, without burrs, lightweight and non warping. Natural wood texture helps engraved designs read clearly on the face.

It also works for wood burning, painting and scroll sawing between laser jobs. That shared use helps a small shop get more value from one pack, from military models to movie props and educational aids.

This pack is listed for wedding decorations, store signboards, home decor and outdoor welcome signs. Those jobs often need a few sheets at a time, so 20 sheets can cover several finished batches.

Trade off: no larger sheet and fewer sheets than the 30 pack. If you cut weekly, the 30 pack will last longer per order, while this pack suits a shop that wants a lighter restock and more frequent reorders.

FUMILE 20 Pack Basswood Sheets 1/8x12x12 InchCheck it on Amazon

How to compare bulk plywood for laser cutting

Count, size, thickness and wood type decide most of the value here. Compare those four first, then look at grain and finish.

Count sets how long the pack lasts. A 54 pack suits daily cutting, while 10 to 20 sheets suit occasional batches.

Size sets bed fit, with 12 by 12 in as the safest bulk size and 12 by 18 in needing more bed space.

Thickness sets speed and strength. 3mm cuts fast and suits detail, while 6mm gives sturdier parts but needs more power and time.

Wood type sets look, with pale basswood engraving with contrast and darker walnut needing less paint.

Our scores reward packs that match the most common bulk job: repeated 3mm cuts on 12 in squares. That is why basswood multipacks score above specialty walnut and 6mm packs.

A simple check before you order

List your most cut design and count how many sheets it uses each week. That count tells you whether 20, 30, 36, 50 or 54 sheets will last a month.

Next, confirm usable bed size in both directions and note whether your finish is paint, stain or bare wood. Pale basswood suits all three, while walnut may need less face paint and more care with scorch.

If you are unsure between plywood and another sheet, read Plywood vs. MDF: Which is Better for Laser Cutting? before you buy in bulk.

Which sheet count is best for bulk plywood for laser cutting?

20 to 30 sheets is the best starting count for most shops. It covers repeat jobs for a few weeks without a large storage stack.

For a new shop or side business

Start with 20 to 30 sheets of 12 by 12 in, 3mm basswood. You will use the stock before it takes on moisture or warps in storage.

Keep a few sheets for test cuts. Test settings on one corner, then cut the full design if the edges look clean.

If you finish 20 sheets in a month, a 30 or 36 pack may suit the next order.

For a busy production shop

Move to 50 to 54 sheets when you cut 10 plus sheets each week. A larger pack reduces how often you reorder and run out mid job.

Store the stack flat in a dry cabinet, with weight on top to help sheets stay flat. Split a large stack into smaller piles if space is tight.

For classes and clubs

A 50 pack lets each person work on a sheet and leaves spares for mistakes. That shared use makes the larger stack worth the space.

If your machine struggles with thick stock, check Best Laser Engraver For Cutting Plywood to match power to thickness.

Is 3mm or 6mm better in bulk packs?

3mm is better for bulk volume, and 6mm is better for thicker parts. Most repeat jobs use 3mm because it cuts faster.

When 3mm wins

3mm works for ornaments, puzzles, models, cards and small signs. It needs less power and leaves cleaner detail on small shapes.

Bulk 3mm packs also span every count from 10 to 54 sheets. That range lets you match order size to weekly use without changing thickness.

When 6mm wins

6mm suits boxes, larger signs and parts that need to carry weight. It feels sturdier in hand and holds edge finish better.

Keep one small 6mm pack for those jobs. Test 6mm with a small shape before a full sheet.

What size sheet should you buy in bulk?

12 by 12 in is the best bulk size for most laser beds. It fits with room for hold downs and nests well for small parts.

Why 12 by 12 in works

You can place several ornaments or puzzle pieces on one square. Offcuts can become test pieces for engraving settings.

The size also stores well in a flat stack. Most packs here use that square size, so files and nesting plans transfer from one pack to the next.

When 12 by 18 in is better

A 12 by 18 in sheet suits wide signs and long model parts. It can cut a design that would need two squares joined.

Measure your bed in both directions before you buy. Only one pack here uses the longer size, with 12 sheets, so pair it with a square bulk pack for regular work.

How to nest parts for less waste

Group small parts by shape and thickness. Cut the same thickness on one sheet so settings stay consistent.

Leave a small gap between parts so cut pieces do not fuse. Save flat offcuts for small test shapes and color tests.

Basswood or walnut: which bulk wood should you stock?

Basswood is the best bulk stock, and walnut is the best accent wood. Stock basswood for volume, then add walnut for focal pieces.

Why basswood suits bulk work

Basswood is pale, so engraved lines show dark contrast. It also takes paint and stain well for finished pieces.

Most bulk packs in this group use basswood across counts from 12 to 54 sheets. That range covers small batches, classes and daily production without switching wood type.

When walnut is worth it

Walnut grain adds depth to cards, boxes and gift items. It can reduce the need for paint on the face.

Dark walnut shows scorch more, so test power and speed on a corner. The walnut pack here has only 10 sheets, which fits accent work.

How to mix both woods

Cut most of a job in basswood, then cut a few accent pieces in walnut. That mix gives you volume plus higher value pieces from one order day.

Label walnut sheets so they do not get mixed into a basswood batch, and keep walnut separate in storage.

How do you store bulk plywood so it stays flat?

Store bulk plywood flat, dry and weighted. Moisture and uneven stacking cause warping that hurts cut accuracy.

Keep the stack off the floor in a cabinet or on a flat shelf. A board on top with light weight helps sheets stay flat.

Leave room around the stack so air can move, but avoid direct heat or damp walls. Test a sheet for flatness before a large run.

If a sheet warps, use it for test cuts or small parts first. Save the flattest sheets for detailed designs that need tight slot fits.

Rotate stock so older sheets are used first. That habit keeps a 50 or 54 sheet stack from aging at the bottom.

Verdict: best bulk plywood for laser cutting

Pick the VKIZA 30 Pack Basswood Sheets 12"x12"x1/8" if you want a balanced bulk restock for weekly cutting. That pack sits in the middle of the count range, so it lasts longer than a 10 or 12 sheet batch without creating the storage load of a 50 plus stack.

Pick the VKIZA 54 pack if you cut daily and need the largest count. Pick walnut for contrast pieces, and ESRICH 6mm for thicker parts that need more depth.

Start with 12 by 12 in, 3mm basswood unless your bed and designs need another size. That format gives the best mix of speed, fit and repeat use for ornaments, models, signs and puzzles.

For your next step, check the Best Plywood For Laser Cutting guide to confirm settings for your machine.

Our top 3 picks at a glance

  1. 1 VKIZA 30 Pack Basswood Sheets 12"x12"x1/8"
    Best for steady repeat orders

    VKIZA 30 Pack Basswood Sheets 12"x12"x1/8"

    9.7/10 our score

    See it on Amazon
  2. 2 VKIZA 12 Pack Basswood Sheets for Crafts
    Best for larger sheet layouts

    VKIZA 12 Pack Basswood Sheets for Crafts

    9.7/10 our score

    See it on Amazon
  3. 3 VKIZA 10 Pack Walnut Plywood Sheets 12x12x1/8
    Best for walnut contrast

    VKIZA 10 Pack Walnut Plywood Sheets 12x12x1/8

    9.5/10 our score

    See it on Amazon

Frequently asked questions

How much bulk plywood should a small shop buy first?

Start with 20 to 30 sheets of 12 by 12 in 3mm basswood if you cut weekly. That count covers repeat orders and test cuts without a large storage stack.

Move to 50 plus sheets when one design uses several sheets each week.

Is 3mm or 6mm better for bulk laser cutting?

3mm cuts faster and suits ornaments, models and signs. 6mm gives sturdier parts for boxes and larger structures.

Most bulk shops use 3mm for volume and keep a small 6mm pack for thicker work.

What sheet size fits most laser beds?

12 by 12 in is the safest bulk size because it fits many beds with room for hold downs. 12 by 18 in sheets give wider layouts but need a bed that clears 18 in in one direction.